FEELER: TWD wide body kit.

bullitt5897 · 04-21-2016, 03:29 PM

Hey Everyone,

So we have so many of these over fenders that it drives me freaking nuts... I cant stand the look of over fenders... This is what prompted me to design and build my kit the way I did. A true wide body that has an oem look while providing the needed width for users. Following Zdayz I will be looking into having my kit reproduced and available for the market... A true wide body kit!

Some specs on my kit:
Front Fenders:
-Width + ~50mm/ea
-Has an adapter to mate to any stock line bumper.
-It is designed based off of proven aerodynamic designs used in JGTC. The design basically pulls air from the wheel wells and under the car and channels it around the side of the vehicle giving you additional downforce versus a stock fender.

Side Skirts:
-Based off of the ZELE japan kit this customized sideskirt will mate up to my wide body.
-Optional Carbon Plate side skirt diffuser will be available.

Rear Fenders:
-Width + ~75mm/ea
-Will need to be used with my provided side skirt or you can make your own.
-Tapers 2" at the bottom and ramps up to 3" at the top.
-For the rear bumper I will be developing a carbon fiber adapter to blend with the rear bumper of your choice.
-There are two options:
+I can make these as quarter panel replacements which will require more labor.

or
+I can make this as a bolt on item that attaches further away from the wheel arches and will save you money on install.

Rear Diffuser:
-I have a one off Difflow style diffuser.
-I will be looking to make a carbon version of this diffuser.
-It will come with its own hardware.
-Please note this will not fit exhausts like Fast intentions which hang really low...

Pricing:
I will not have pricing until after the molds are made. I will come back as a vendor once this becomes available. But if I had to throw a swag at it I would say expect the cost to be around $4K for everything. Again this is a SWAG and until the molds are made I wont know the cost.

Availability:
TBD

Materials:
In order to make this affordable the best bet is to do a mix of FRP and CF. However, there will be options for full carbon.

Fitment:
I will be offering a fitment guarantee and each kit will be serialized to your order so you know you will be getting my authentic kit.

Also everything will be made local to me to ensure a proper QC.

Wheel Fitment:
F:20x11 (ET -21) 275 series tire
R:20x12.5 (ET -27) 315 series tire

Now on to the Kit:

bullitt5897 · 04-21-2016, 03:31 PM

sorry for those that voted already. I wanted to make some changes to the thread that required making a new one. Please feel free to recast your vote.

scope22 · 04-21-2016, 03:40 PM

So awesome, can't wait....

bullitt5897 · 04-22-2016, 10:53 AM

Well hopefully we can drive more interest.

axmea? · 04-22-2016, 11:19 AM

Your car is on a different level.

Cool idea and absolutely cleaner vs the add-on. For the front fenders, any thoughts of making the notched section optional? The physics of drawing air to the back will also include a lot of debris..... lots of it.

bullitt5897 · 04-22-2016, 05:08 PM

I was thinking of making a carbon fiber cover like j's racing does for the s2000. That should do what your wanting.

Stright_Drop · 04-22-2016, 09:09 PM

Looks great..keep it going I'll get it

Masterbeatty · 04-22-2016, 10:12 PM

This would be awesome but hopefully not to much to break the go fast fund.

bullitt5897 · 04-24-2016, 11:20 PM

Keep the votes coming. The more votes I get the better gauge I have on whether I do this or not.

Chuy · 04-25-2016, 10:24 PM

No pictures, I like pictures easier to read

bullitt5897 · 04-25-2016, 10:40 PM

Quote:

Originally Posted by Chuy

No pictures, I like pictures easier to read

I will have to fix them tomorrow it's weird cause the pictures were working just fine earlier today.

View Poll Results: Would you be interested in a production kit?
Yes I am interested	6	20.69%
No I am not interested	12	41.38%
Yes but pending pricing	4	13.79%
Maybe pending more design details	7	24.14%
Voters: 29. You may not vote on this poll

04-21-2016, 03:29 PM	#1 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	FEELER: TWD wide body kit. Hey Everyone, So we have so many of these over fenders that it drives me freaking nuts... I cant stand the look of over fenders... This is what prompted me to design and build my kit the way I did. A true wide body that has an oem look while providing the needed width for users. Following Zdayz I will be looking into having my kit reproduced and available for the market... A true wide body kit! Some specs on my kit: Front Fenders: -Width + ~50mm/ea -Has an adapter to mate to any stock line bumper. -It is designed based off of proven aerodynamic designs used in JGTC. The design basically pulls air from the wheel wells and under the car and channels it around the side of the vehicle giving you additional downforce versus a stock fender. Side Skirts: -Based off of the ZELE japan kit this customized sideskirt will mate up to my wide body. -Optional Carbon Plate side skirt diffuser will be available. Rear Fenders: -Width + ~75mm/ea -Will need to be used with my provided side skirt or you can make your own. -Tapers 2" at the bottom and ramps up to 3" at the top. -For the rear bumper I will be developing a carbon fiber adapter to blend with the rear bumper of your choice. -There are two options: +I can make these as quarter panel replacements which will require more labor. or +I can make this as a bolt on item that attaches further away from the wheel arches and will save you money on install. Rear Diffuser: -I have a one off Difflow style diffuser. -I will be looking to make a carbon version of this diffuser. -It will come with its own hardware. -Please note this will not fit exhausts like Fast intentions which hang really low... Pricing: I will not have pricing until after the molds are made. I will come back as a vendor once this becomes available. But if I had to throw a swag at it I would say expect the cost to be around $4K for everything. Again this is a SWAG and until the molds are made I wont know the cost. Availability: TBD Materials: In order to make this affordable the best bet is to do a mix of FRP and CF. However, there will be options for full carbon. Fitment: I will be offering a fitment guarantee and each kit will be serialized to your order so you know you will be getting my authentic kit. Also everything will be made local to me to ensure a proper QC. Wheel Fitment: F:20x11 (ET -21) 275 series tire R:20x12.5 (ET -27) 315 series tire Now on to the Kit: vividracing likes this. __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

04-21-2016, 03:31 PM	#2 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	sorry for those that voted already. I wanted to make some changes to the thread that required making a new one. Please feel free to recast your vote. __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

04-22-2016, 10:53 AM	#4 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	Well hopefully we can drive more interest. __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

04-22-2016, 11:19 AM	#5 (permalink)
axmea? A True Z Fanatic Join Date: Apr 2012 Location: SoCal Posts: 6,235 Drives: WELL ZED PW 6MT Rep Power: 53241	Your car is on a different level. Cool idea and absolutely cleaner vs the add-on. For the front fenders, any thoughts of making the notched section optional? The physics of drawing air to the back will also include a lot of debris..... lots of it. __________________ >MyZ's Album< NISMO Convert/ECUTEK/Takeda CAI/F.I. HFC NR CB Carbon/F.I. 34 Row Oil Cooler/4.08 Final Drive /Powertrix+Swifts/Hotchkis/SPL/Whiteline/TWM/Zoom Engineering/EVO-R/AeroJacket Vented CF Fenders + CF Spoiler/Avant Garde-WORK/NST/Morimoto Halo/STi Clear Lenses/Carbon Signal Automotive/RJM Performance/ZSpeed Clutch Flywheel CSC delete

04-21-2016, 03:40 PM	#3 (permalink)
scope22 A True Z Fanatic Join Date: Apr 2012 Location: Roswell, GA Posts: 1,179 Drives: wife crazy Rep Power: 55	So awesome, can't wait....

04-22-2016, 05:08 PM	#6 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	I was thinking of making a carbon fiber cover like j's racing does for the s2000. That should do what your wanting. __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

04-22-2016, 09:09 PM	#7 (permalink)
Stright_Drop Base Member Join Date: Sep 2012 Location: Jacksonville,Fl Posts: 121 Drives: 2014 Nismo 6speed Rep Power: 13	Looks great..keep it going I'll get it bullitt5897 likes this.

04-22-2016, 10:12 PM	#8 (permalink)
Masterbeatty A True Z Fanatic Join Date: May 2012 Location: Whales Vagina Posts: 4,586 Drives: the speed limit... Rep Power: 122867	This would be awesome but hopefully not to much to break the go fast fund. bullitt5897 likes this. __________________ 2011 MB 6MT Masterbeatty journal

04-24-2016, 11:20 PM	#9 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	Keep the votes coming. The more votes I get the better gauge I have on whether I do this or not. __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

04-25-2016, 10:24 PM	#10 (permalink)
Chuy Enthusiast Member Join Date: Apr 2010 Location: Colorado Springs Posts: 474 Drives: 2015 NISMO Rep Power: 15	No pictures, I like pictures easier to read __________________ Miko 2015 Nismo Tech: nothing RIP Ginger 2009 370Z Sport Touring

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
It isnt like any other wide body kit ! Megan Ver1.0 Wide Aero Body Kit.	Megan370z	Track / Autocross / Drifting / Dragstrip	18	04-21-2015 08:13 AM
Looking for a wide body solution	DjSquall	Exterior & Interior	48	05-11-2013 01:29 AM
Vielside Wide Body Kit	HandnPantz	Exterior & Interior	3	03-20-2012 03:24 AM
Seibon Wide Body	Jamaica	Exterior & Interior	86	11-18-2010 05:48 AM
VeilSide Wide body.	Jamaica	Exterior & Interior	24	09-15-2010 11:52 PM