REVIEW: Trak Art NLTA Nissan 370z Direct Bolt-in Harness Bar

1cleanZ · 08-25-2015, 09:17 AM

I personally have been using this bar in my Nismo for Autocross for the past few years, and wanted to type up a review with my experiences.

Bar is Manufactured by a company out of Australia called TrakArt (very well known for their full all out race car builds with full racks/cages.) and made available to the consumers here in the states by Next Level Performance with Group Buys/bulk orders to cut down on shipping, wait time, and duty taxes.

Ratings (1-10)
Ease of Install = 10
You don't have to remove the entire interior or do much modification. The two inside above the OEM support bar slide right off, which the bar utilizes 2 OEM screws that mount to the OEM support bar mount.

Function/Design = 10
It fits VERY snug into the car which is to be expected. The bar uses both OEM seat belt bolts yet it keeps them 100% functionable for that quick in and out use but still knowing you have your harness there for track days.

While 99% of the stress is kept at the OEM seat belt mounting points, helping prevent the bar from pivoting are the two bolts going directly into the MOUNT of the OEM support bar, not the actual weak bar. The mounts have been strength tested to provide enough strength to support the bar from pivoting.

Key Features/Details
-350mpa CDW Roll Cage Tubing
-Maintains standard <20% shoulder angle
-Keeps OEM seat belts intact for optional daily use
-Ease of install-you do NOT need to remove your entire interior, just 2 caps
-Very minor modification needed for install
-Each bar comes powdercoated black, custom colors available for additional charge (please inquire)
-Bar has ZERO restriction on seat positioning

kenchan · 08-25-2015, 11:14 AM

looks good.

nissan_fan · 08-25-2015, 11:51 AM

It looks pretty good.

Also found this post. 370Z Harness Bar

1cleanZ · 09-24-2015, 08:43 AM

Another install. An absolute must for a '15 Nismo to put those seats to use!

tonythetiger · 09-26-2015, 11:22 AM

loooks sweet, next mod to do!

NJZGuy · 10-04-2015, 09:58 AM

Very nice!

NorthStyle · 07-11-2017, 04:31 PM

Has anyone done a DIY for this specific harness bar? I've been back-and-forth with NextLevel Performance (who I purchased it through) after wrestling with it for a few hours only to find out I'm missing some hardware and I still don't have the bar mounted.

Pretty annoyed to purchase a $700 item and not be supplied with any form of instructions, especially with it being a safety item.

08-25-2015, 09:17 AM	#1 (permalink)
1cleanZ A True Z Fanatic Join Date: Dec 2010 Location: Twin Cities, MN Posts: 1,132 Drives: '09 PW Nismo Rep Power: 21	REVIEW: Trak Art NLTA Nissan 370z Direct Bolt-in Harness Bar I personally have been using this bar in my Nismo for Autocross for the past few years, and wanted to type up a review with my experiences. Bar is Manufactured by a company out of Australia called TrakArt (very well known for their full all out race car builds with full racks/cages.) and made available to the consumers here in the states by Next Level Performance with Group Buys/bulk orders to cut down on shipping, wait time, and duty taxes. Ratings (1-10) Ease of Install = 10 You don't have to remove the entire interior or do much modification. The two inside above the OEM support bar slide right off, which the bar utilizes 2 OEM screws that mount to the OEM support bar mount. Function/Design = 10 It fits VERY snug into the car which is to be expected. The bar uses both OEM seat belt bolts yet it keeps them 100% functionable for that quick in and out use but still knowing you have your harness there for track days. While 99% of the stress is kept at the OEM seat belt mounting points, helping prevent the bar from pivoting are the two bolts going directly into the MOUNT of the OEM support bar, not the actual weak bar. The mounts have been strength tested to provide enough strength to support the bar from pivoting. Key Features/Details -350mpa CDW Roll Cage Tubing -Maintains standard <20% shoulder angle -Keeps OEM seat belts intact for optional daily use -Ease of install-you do NOT need to remove your entire interior, just 2 caps -Very minor modification needed for install -Each bar comes powdercoated black, custom colors available for additional charge (please inquire) -Bar has ZERO restriction on seat positioning Boost_lee, BGTV8, JARblue and 3 others like this. __________________ 2009 PW Nismo #0021 -My Built Progress >>1cleanG to 1cleanZ<< Team NextLevel Last edited by 1cleanZ; 04-21-2016 at 12:52 PM.

08-25-2015, 11:51 AM	#3 (permalink)
nissan_fan Base Member Join Date: Feb 2012 Location: PR Posts: 123 Drives: 2012 370z PW M6 Rep Power: 13	It looks pretty good. Also found this post. 370Z Harness Bar Last edited by nissan_fan; 08-25-2015 at 12:07 PM. Reason: Added link

09-24-2015, 08:43 AM	#4 (permalink)
1cleanZ A True Z Fanatic Join Date: Dec 2010 Location: Twin Cities, MN Posts: 1,132 Drives: '09 PW Nismo Rep Power: 21	Another install. An absolute must for a '15 Nismo to put those seats to use! NJZGuy likes this. __________________ 2009 PW Nismo #0021 -My Built Progress >>1cleanG to 1cleanZ<< Team NextLevel

09-26-2015, 11:22 AM	#5 (permalink)
tonythetiger A True Z Fanatic Join Date: Oct 2010 Location: SA, TX Posts: 1,035 Drives: 10 Nissan 370z PG MT Rep Power: 193	loooks sweet, next mod to do! __________________ KWV3/Eibach/StillenG3/FI CBE+LTH+34Row/Uprev/SPL/SouthBendSS/QuaifeLSD/4.08/TommyKaira/Status/VolkZE40/AP Radical BBK/Seibon/Amuse/VIS/Sparco/WorksBellGTC/RJM/Nismo

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] H&R Trak+ Wheels Spacers DRM 20 MM Bolt On	john_d13	Parts for sale (Private Classifieds)	4	05-17-2015 01:55 AM
2-piece open slot rotor direct bolt on with your (none sport caliper)	RacingBrake	Suspension/Brakes	0	01-29-2013 05:46 PM
FS: Custom overflow tank (direct bolt-on)	SxExCx	Parts for sale (Private Classifieds)	20	11-17-2010 07:56 PM

08-25-2015, 11:14 AM	#2 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	looks good.

10-04-2015, 09:58 AM	#6 (permalink)
NJZGuy Base Member Join Date: Jun 2012 Location: New Jersey Posts: 29 Drives: 2009 Nissan 370Z 7AT Rep Power: 13	Very nice!

07-11-2017, 04:31 PM	#7 (permalink)
NorthStyle A True Z Fanatic Join Date: Aug 2015 Location: Deutschland + SC/FL USA Posts: 1,258 Drives: 2011 370Z Nismo Rep Power: 24277	Has anyone done a DIY for this specific harness bar? I've been back-and-forth with NextLevel Performance (who I purchased it through) after wrestling with it for a few hours only to find out I'm missing some hardware and I still don't have the bar mounted. Pretty annoyed to purchase a $700 item and not be supplied with any form of instructions, especially with it being a safety item.