Cruising on highway this evening and check engine light starts flashing but goes away. I run errands and go to autozone to get codes read. I also check oil and
|
|
LinkBack | Thread Tools | Display Modes |
12-28-2014, 01:10 AM | #1 (permalink) |
Track Member
Join Date: Jan 2013
Location: Dallas
Posts: 697
Drives: 09 370 sports clone
Rep Power: 13 |
Damn p0011, p0300,p0524
Cruising on highway this evening and check engine light starts flashing but goes away. I run errands and go to autozone to get codes read. I also check oil and looked good. On the way home I hear pinging and check engine light stays on and then shortly after goes into limp mode.
Have to wait till Monday to take to dealer.
__________________
09 370z 6spd traded 1/12/15 for 15 Challenger RT 6spd |
12-28-2014, 08:17 AM | #3 (permalink) |
Premium Member
Join Date: Nov 2010
Location: South Arkansas
Posts: 8,435
Drives: 2014 Challenger
Rep Power: 324198 |
A Q&D look on the Intertubes says low oil pressure to VVEL is a likely cause. It may be a plugged passage or a dirty filter in the VVEL system. But that's just what I read - YMMV.
__________________
Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma Last edited by SouthArk370Z; 12-28-2014 at 08:21 AM. |
12-28-2014, 06:58 PM | #4 (permalink) |
Track Member
Join Date: Jan 2013
Location: Dallas
Posts: 697
Drives: 09 370 sports clone
Rep Power: 13 |
Thanks. Did the reset before i went to work and was fine but just temporary because it eventually goes into limp mode again and rattle sound. Oil level is good and no new mods.
I will take it in this week. I have extended warrany so should get fixed but probably trade in after that.
__________________
09 370z 6spd traded 1/12/15 for 15 Challenger RT 6spd |
12-28-2014, 07:11 PM | #5 (permalink) |
A True Z Fanatic
Join Date: Mar 2011
Location: Framingham MA
Posts: 2,732
Drives: 2014 Q50 AWD
Rep Power: 19 |
Are you stock ? I had the same code and was more or the p0300 random misfire that threw the other codes mine was cause by a vacum leak at the manifold . I fixed it rest it ECU and has not come back, this was over the summer
__________________
14 Q50 AWD, ARK, ECUTEK (SEB), Takda, |
12-28-2014, 07:31 PM | #6 (permalink) |
A True Z Fanatic
Join Date: May 2010
Location: nirvana
Posts: 6,394
Drives: 2023 NATM
Rep Power: 418 |
Assuming nothing mechanical, it could be either bad cam position or VVEL sensor. The random misfire is resulting from the other issue(s).
__________________
Enjoy it. Destroy it. |
12-29-2014, 02:47 AM | #7 (permalink) |
Enthusiast Member
Join Date: Nov 2012
Location: Sydney
Posts: 428
Drives: 11 Nissan 370Z MB M6
Rep Power: 139 |
any oil leaks at the front of the engine? in particular the two cast alloy covers on the very front of the engine or the solenoids attached to them?
it's a VVT fault, not a VVEL fault although VVEL does use VVT to do its job. There are separate codes for VVEL faults. how often do you change your oil? what viscosity oil is in there at the moment? you might have an internal oil leak Last edited by juld0zer; 12-29-2014 at 02:50 AM. |
12-29-2014, 04:38 PM | #8 (permalink) | |
Track Member
Join Date: Jan 2013
Location: Dallas
Posts: 697
Drives: 09 370 sports clone
Rep Power: 13 |
Quote:
Run 5w30, oil changed about 3500 mi ago. Mods....M370 mani, Berk HFC, OEM Nismo exhaust. But those have been on for awhile haven't messed with anything under hood since summer.
__________________
09 370z 6spd traded 1/12/15 for 15 Challenger RT 6spd Last edited by 7speed; 12-29-2014 at 04:42 PM. |
|
12-29-2014, 06:15 PM | #9 (permalink) |
Enthusiast Member
Join Date: Nov 2012
Location: Sydney
Posts: 428
Drives: 11 Nissan 370Z MB M6
Rep Power: 139 |
the rocker cover gaskets are not relevant to the fault codes. Sounds like you might have a pcv/ccv leak somewhere.
if the valve timing is off, it could register as a random misfire because the off valve timing can cause a compression leak and that combustion cycle will be off. if you want to have a play, pull out one of the VVT solenoids and check for sludge and debris. You can access the right side one easily but the left side you cant remove without a lot of other work. like Southark mentioned, you could have blocked VVT filters. There is a thimble gauze filter on each bank, behind the timing cover gasket. |
12-29-2014, 10:35 PM | #10 (permalink) |
Track Member
Join Date: Jan 2013
Location: Dallas
Posts: 697
Drives: 09 370 sports clone
Rep Power: 13 |
Thanks for replies. I have appt in the a.m with dealer havent had time to play with it.
__________________
09 370z 6spd traded 1/12/15 for 15 Challenger RT 6spd |
01-26-2015, 05:01 AM | #11 (permalink) |
Enthusiast Member
|
Had the same problem, took me a while to identify the fault, it was one of the intake valve timing solenoids
Genuine Nissan Engine Camshaft Valve Timing Control Solenoid (see list for fit) | eBay Took both out and checked by giving 12V DC and the faulty one wouldn't plunge, so gave it a good clean it now works perfect. Order new parts just in case it happens again. Hope you got yours sorted already. |
09-20-2017, 08:18 PM | #12 (permalink) |
A True Z Fanatic
Join Date: May 2012
Location: Colorado (9000 feet)
Age: 56
Posts: 1,796
Drives: 09 6mt, 13 Sequoia,
Rep Power: 15749 |
It's possibly your oil gallery gaskets and can be very very serious. Have shop/dealer check for that
__________________
09 6spd Berk CBE, JWT cams, ZSpeed CSC, Stillen (25 row oil, brake cooling, sways, gen3 CAI), Passport (9500ci), Quaife LSD, Z1 400 hp kit, ss lines, pads, rotors, clutch etc, Phunk's pan and fuel starve fix |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
P0300, high idle, | Sidz | Intake/Exhaust | 32 | 01-03-2023 02:13 AM |
first bump in the road, P0011 and P300 | ANMVQ | Engine & Drivetrain | 6 | 09-21-2017 07:47 PM |
Code P0011 | ben.kathy | Nissan 370Z Owners Manual / Service Manuals | 10 | 09-20-2017 08:19 PM |
P0300 cold mornings? | 1slow370 | Engine & Drivetrain | 16 | 11-21-2013 02:59 PM |
Dreaded P0300 | oro | Engine & Drivetrain | 5 | 01-26-2013 05:32 PM |