P0300 & P0174 but drives normal

stealth23 · 10-09-2014, 06:08 PM

Quote:

Originally Posted by SouthArk370Z

My guess is that you have a leak in the intake/exhaust system. Or a bad O2 sensor. See what the O2 sensors are reading and that should help you narrow down where the problem is.

It may help to read the system description and other info in the FSM. Plus there is usually a detailed explanation of what the different DTCs mean. Great resource for the DIYer.

Quote:

Originally Posted by Chuck33079

P0174 is Bank 2 Too Lean, right? And the P0300 is the random misfire. Maybe a bad O2 sensor? Switch the sensors and see if the code switches with it?

Do I check the voltage of the 02 sensor to determine a bad sensor ? and Ill try to switch the 2 sensors and see if the code changes. ill also check the exhaust pipes for any leaks.

stealth23 · 10-09-2014, 06:26 PM

Does a test pipe usually throw an SES light ?

SouthArk370Z · 10-09-2014, 07:08 PM

Quote:

Originally Posted by stealth23

Do I check the voltage of the 02 sensor to determine a bad sensor ? and Ill try to switch the 2 sensors and see if the code changes. ill also check the exhaust pipes for any leaks.

Yes. You'll probably want to look at the long- and short-term trim values, too. I'm sure others can suggest more params to look at.

If what you are using to read/clear DTCs will read the O2 sensors, use that. If it won't, you can find OBD/CAN monitors for $20 to what-ever-you-want-to-spend. If you're going to do you own maint/repair, it's an invaluable tool.

stealth23 · 11-08-2014, 02:42 PM

Quote:

Originally Posted by SouthArk370Z

Yes. You'll probably want to look at the long- and short-term trim values, too. I'm sure others can suggest more params to look at.

If what you are using to read/clear DTCs will read the O2 sensors, use that. If it won't, you can find OBD/CAN monitors for $20 to what-ever-you-want-to-spend. If you're going to do you own maint/repair, it's an invaluable tool.

Sorry, been a bit busy. but i finally got the readings and here is what i found.

Bank 1 sensor 1 -- no reading
Bank 1 sensor 2 -- Reading(working)

Bank 2 sensor 1 -- no reading(this is the one thats failing and showing error)
Bank 2 sensor 2 --reading(working)
I'm not sure which sensor is located where so I can replace or at least inspect them. Can someone help me guide which sensor is on headers and cats or exhaust. Thanks

here is bank 2 sensor 1- no reading

and here is bank 2 sensor 2 - reading

and here is the fuel trims

juld0zer · 08-01-2016, 05:27 PM

What was the outcome for this issue?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
P0300, high idle,	Sidz	Intake/Exhaust	32	01-03-2023 01:13 AM
p0300 agrivation/rant	calendap	Engine & Drivetrain	9	12-07-2016 04:35 PM
Normal or non normal tire wear	evantorch	Wheels & Tires	5	12-12-2013 06:23 PM
Dreaded P0300	oro	Engine & Drivetrain	5	01-26-2013 04:32 PM
Any information on early 370z test drives/track drives?	E82TT6	Nissan 370Z General Discussions	1	07-26-2012 08:36 AM

10-09-2014, 06:26 PM	#2 (permalink)
stealth23 Base Member Join Date: Aug 2014 Location: Dallas TX Posts: 73 Drives: 09 370z Sports pkg 6 Rep Power: 11	Does a test pipe usually throw an SES light ?

08-01-2016, 05:27 PM	#5 (permalink)
juld0zer Enthusiast Member Join Date: Nov 2012 Location: Sydney Posts: 428 Drives: 11 Nissan 370Z MB M6 Rep Power: 139	What was the outcome for this issue?