Remember when?

wstar · 03-19-2014, 03:12 PM

Does the BCM also check for neutral position on the shifter itself, or does it *only* check the clutch? (If it doesn't, it would be cool to find a way to hack it to check for neutral instead of the clutch).

SouthArk370Z · 03-19-2014, 03:31 PM

Quote:

Originally Posted by wstar

Does the BCM also check for neutral position on the shifter itself, or does it *only* check the clutch? (If it doesn't, it would be cool to find a way to hack it to check for neutral instead of the clutch).

I see no mention of the 6MT needing to be in any certain position to start. As far as I can tell (but I haven't dug very deep), the gear position sensor is only used for SRM.

"The starter motor magnetic switch is supplied with power when the ignition switch is turned to the START position while the selector lever is in the P or N position for A/T models or the clutch pedal is depressed for M/T models." - Page STR-10 of 2009 FSM.

03-19-2014, 03:12 PM	#1 (permalink)
wstar A True Z Fanatic Join Date: Mar 2009 Location: Houston, TX Posts: 4,024 Drives: too slow Rep Power: 3595	Does the BCM also check for neutral position on the shifter itself, or does it only check the clutch? (If it doesn't, it would be cool to find a way to hack it to check for neutral instead of the clutch). __________________ 7AT Track Car! Journal thread / Car setup details

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
12 years later, We'll always remember	DEpointfive0	The Lounge (Off Topic)	25	09-27-2014 03:28 PM
Can't Remember	bjblackout	Exterior & Interior	4	05-08-2012 08:12 AM
lol... cant believe i cant remember this...	JayYoon	Wheels & Tires	5	07-16-2011 01:50 PM
Do you remember that one time?	Matthew	The Lounge (Off Topic)	24	11-24-2010 10:38 PM
Remember this commercial?	cstr_Cali	Nissan 370Z Photos / Spyshots / Video / Media Gallery	10	12-02-2008 05:20 PM