Clutch Masters Clutch/flywheel set-up

12nismo

Hey guys, I'm looking to get a new Clutch/Flywheel when I replace my CSC with the Zspeed unit. I've used the Clutch Masters FX300 w/ Steel Flywheel on my previous car and liked it. I'm looking into getting the same set-up with my Z except this time going with the Aluminum Flywheel (13lbs). CM seems to have the lightest flywheel for our cars and is a reputable company which is why I was a little curious why nobody on the forum runs them. Is there some issue that i dont know about? Any input or experience with CM products on a 370z would be greatly appreciated.

__________________
nismo Z34 12 0209
JTran Motorsports//Stillen//Fast Intentions//EcuTek//Z1 Motorsports//Eibach//BRIDE //Zspeed//Carbon Signal//Houston Halos//Southbend//Whiteline//TWM//NonStopTuning//Doran Racing

luigi90210

i personally have never heard of them before, i run JWT because they are a local company and specialize in Z parts

if you have experience with their company i say go for it and post a review

__________________
SOLD 370z
New Car:classified
DD:2011 Mini Cooper S stock

12nismo

The only thing that concerns me is that its the lightest flywheel @ 13lbs and no one runs it. How light is too light?

__________________
nismo Z34 12 0209
JTran Motorsports//Stillen//Fast Intentions//EcuTek//Z1 Motorsports//Eibach//BRIDE //Zspeed//Carbon Signal//Houston Halos//Southbend//Whiteline//TWM//NonStopTuning//Doran Racing

JC671

I was looking for the lightest myself as I want it to rev as quickly as possible. I understand the noise and chatter will go up but I can deal with that as long as the flywheel is functional. 350z's have 9lbs flywheels, why can't we have one like that? Are 350z flywheels interchangeable with ours?

__________________

A special "Thank You" to the Fast Intentions Crew!
"Fueled By Passion"

7speed

Never heard of that company either. But eventually I will get a steel flywheel from southbend. It's about 23 lbs and I saw vid of it not being noisier than stock. You probably don't wan't to go to light like the 9 lbs your talking about unless just a track car. Plus it probably will sound like a diesel.

Most people go with JWT clutch/fly combo.

__________________
09 370z 6spd traded 1/12/15 for 15 Challenger RT 6spd

MacLean

__________________
l Meisterschaft Full Cat-Back Exhaust l F. I. Resonated High Flow Cats l Stillen Gen 3 l M370 Intake Manifold l UpRev l JWT Clutch & Flywheel l ZSpeed HD CSC l Stillen 19 Row Oil Cooler l ZSpeed Powercoated Under Tray l GTSpec: 6, 4, 2 Point Brace l

Joepro

11lb act in my 350z was like a cement mixer, the 14.5 southbend in the 370z is noticable but not overbearing...granted they are different powerplants the 350z reved much quicker.

__________________
Swift|Koni|SPC| FI CBE|Z1|Stillen|Sbend|Zspeed|R/T Tuned|523 whp|458 tq|10.5 psi|SOLD
Joepro's Journal|Joepro's Boosted Performance Build |Pittsburgh-Western-Pa-Ohio-Wv-Group

Matt@GTM

I have an OS Giken in mine but I have been wondering out of curiosity if any one has used the clutch masters kevlar disks yet on the 370z

SPOHN

I have the Kevlar (DXD). Only way to go IMO. Long break in procedure but best clutch period. It's louder than any other clutch but it's a mans clutch. Grabs great.

__________________

Joe@ZSpeed

Cuz rigid race car
Just the "TZ-R" Clutch (Rigid disk) is that noisy, All other South Bends are much quieter

__________________
http://photos.zspeedperformance.com/...ardsize=468x60
Phone 937-506-7224
E-Mail Sales@Zspeed.com
www.ZSPEED.com

Minato

Aasco is 13 lbs as well. Haven't seen any vids/reviews of that one either...

JC671

Did some research but says it fits 370z for years 07-08

__________________

A special "Thank You" to the Fast Intentions Crew!
"Fueled By Passion"

luigi90210

the 07-08 clutch and flywheel should fit our 370zs, iirc JWT is using a 07-08 350z flywheel and clutch for our cars, not entirely sure though, i didnt ask the last time i was there

__________________
SOLD 370z
New Car:classified
DD:2011 Mini Cooper S stock