A/F Ratio Meter

blueranger

I did try to search but did not come up with much

Would like to get some brand recommendations for a good plug n play Meter that can check A/F ratios and any other options a plus.

Thanks

__________________
F.I. Stage 1 Twin Turbo #48 | E85 FlexFuel | Built 7AT | F.I. 34 Row Oil Cooler | F.I. Flex Plate | F.I. 19 row Trans Cooler | MT ET Street S/S | ECUTEK Tuned by Seb | RPM Roll Bar

Chuck33079

I've had no problems with my Innovate.

__________________
2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

Alstann

I'll put my chip in for Prosport. I have the Premium Halo Analog wideband w/ Bosch sensor and it works great. Good if you like analog gauges.

__________________

blueranger

Is it the LM2 Wideband O2 Digital ?

If not can you give me a model?

Thanks

__________________
F.I. Stage 1 Twin Turbo #48 | E85 FlexFuel | Built 7AT | F.I. 34 Row Oil Cooler | F.I. Flex Plate | F.I. 19 row Trans Cooler | MT ET Street S/S | ECUTEK Tuned by Seb | RPM Roll Bar

blueranger

Where can I look at this .. Vendor or website?

Looking for a hand held not installed gauge.


Thanks

__________________
F.I. Stage 1 Twin Turbo #48 | E85 FlexFuel | Built 7AT | F.I. 34 Row Oil Cooler | F.I. Flex Plate | F.I. 19 row Trans Cooler | MT ET Street S/S | ECUTEK Tuned by Seb | RPM Roll Bar

Chuck33079

I believe so. Ill double check tomorrow.

__________________
2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

synolimit

I had a innovate too. Sensor lasted only 2 years maybe. It was $69 to replace. That might be good or bad depending on, as it was placed in the bellmouth of a turbo downpipe only 3" from the turbine exhaust. It was nice to be able to plug into a laptop with ease and easy to use with computer software when tuning.

__________________
13 370z-

blueranger

Is there a meter that can just plug into the OBD2 port?

I had a Brockway Engineering on my 996tt that connected to the port and gave me all the readings needed.

__________________
F.I. Stage 1 Twin Turbo #48 | E85 FlexFuel | Built 7AT | F.I. 34 Row Oil Cooler | F.I. Flex Plate | F.I. 19 row Trans Cooler | MT ET Street S/S | ECUTEK Tuned by Seb | RPM Roll Bar

Alstann

Yes, but the readings are not accurate.

Android and iPhones have apps that can do that (Torque, Dashcommand) via bluetooth obd adapter, but the afr readout is not accurate, according to my wideband.

__________________

flashgordon

Hi,

I would mount Innovate LM-2.

I have Berk HFC with the hole for an additional wide band Lambda sensor.

The LM-2 have 8ft of wire to the Lambda.

Any suggestion for a passage between the bottom of the car and the cabin?
...passing near the header I suspect that it's too hot for the wires....

Thanks.

__________________
HFC Berk - CAI Stillen GEN3 - Catback Nismo - ECU reflash with UpRev - Clutch South Bend Stage II daily with ZSpeed HD CSC - Setrab Oil Cooler Kit with Mishimoto Thermostatic Plate Gold - PJMu Brake Pads - Oil Pressure Gauge GlowShift - TPMs Hella TC400 - Steering Lock disable switch by me - OBD Link MX with Asus Nexus & Torque App