Reseting the ECU?

Jimc · 06-05-2013, 08:14 PM

Once you get done adding some bolt ons like CAI and CBE is there a way to reset the ECU? Actually did try the search, but didn't come up with anything or used the wrong terms.

Thanks

Jim

Zbrah · 06-05-2013, 08:53 PM

On my gc I usually just disconnect the negative on the battery and let it sit for few minutes and the ecu resets itself, not too sure if this will work on your Z because I don't own one yet.

Zbrah · 06-05-2013, 08:54 PM

quick google search
RESET ECU alternative method

Trips · 06-05-2013, 08:56 PM

^^^

Thanks for Helping

Quote:

Originally Posted by Zbrah

On my gc I usually just disconnect the negative on the battery and let it sit for few minutes and the ecu resets itself, not too sure if this will work on your Z because I don't own one yet.

Same thing on the Z

Also

Op, Be warned you will probably need to do a window reset also

1. Push the ignition switch to the ON position.

2. Close the door.

3. Open the window completely by operating
the power window switch.

4. Pull the power window switch and hold it to
close the window, and then hold the switch
more than 3 seconds after the window is
closed completely.

5. Release the power window switch. Operate
the window by the automatic function to
confirm the initialization is complete.

6. Perform steps 2 through 5 above for other
windows.

Baer383 · 06-05-2013, 08:58 PM

Quote:

Originally Posted by Triple's

^^^

Thanks for Helping

Same thing on the Z

Also

Op, Be warned you will probably need to do a window reset also

1. Push the ignition switch to the ON position.

2. Close the door.

3. Open the window completely by operating
the power window switch.

4. Pull the power window switch and hold it to
close the window, and then hold the switch
more than 3 seconds after the window is
closed completely.

5. Release the power window switch. Operate
the window by the automatic function to
confirm the initialization is complete.

6. Perform steps 2 through 5 above for other
windows.

Thanks for helping out Trip

Leuz · 06-05-2013, 11:25 PM

For the CAI installation you should unplug the negative battery plug anyway

PS: The ECU will adjust itself (no tune "really needed") to the new values if you don't go too wide with the CAI tubes.

06-05-2013, 08:14 PM	#1 (permalink)
Jimc Base Member Join Date: May 2013 Location: New Jersey Age: 74 Posts: 97 Drives: 12 Vert Tour BS M6 Rep Power: 12	Reseting the ECU? Once you get done adding some bolt ons like CAI and CBE is there a way to reset the ECU? Actually did try the search, but didn't come up with anything or used the wrong terms. Thanks Jim

06-05-2013, 08:54 PM	#3 (permalink)
Zbrah A True Z Fanatic Join Date: May 2013 Location: The370Z.com Posts: 4,956 Drives: 370Z Rep Power: 5452	quick google search RESET ECU alternative method Trips likes this.

06-05-2013, 11:25 PM	#6 (permalink)
Leuz Track Member Join Date: Nov 2012 Location: NorCal Posts: 555 Drives: Bunny Rep Power: 13	For the CAI installation you should unplug the negative battery plug anyway PS: The ECU will adjust itself (no tune "really needed") to the new values if you don't go too wide with the CAI tubes. __________________ 2013 PW 370Z Touring+Sport, NAV Tint 35% side, 18% back \| RJM clutch pedal \| ZSpeed SS lines \| Stillen Gen3 CAI \| Fast Intentions HFC and TDX 12'' CF CBE \| UpRev

06-05-2013, 08:53 PM	#2 (permalink)
Zbrah A True Z Fanatic Join Date: May 2013 Location: The370Z.com Posts: 4,956 Drives: 370Z Rep Power: 5452	On my gc I usually just disconnect the negative on the battery and let it sit for few minutes and the ecu resets itself, not too sure if this will work on your Z because I don't own one yet.