Deep finned diff cover??

olddudesrule · 06-02-2013, 12:20 PM

I'm looking for a thread I saw in the last few months on a finned diff cover for the Z. I searched this section of the forum, and can't seem to find the one I was thinking about. It's not the one listed below, or the one on the GTM diff cooler from 2009-2011.

Nismo finner diff cover

I thought I remembered reading one that indicated that Nismo's had the finned housing from the factory, but I know my 2012 doesn't. Any pics, ideas or info? Not interested in installing a diff cooler or OS Giken rear at this time, just fishing for info.

Thanks, Pete

Trips · 06-02-2013, 12:28 PM

I believe the cover is from a 350

But I found this and hope it helps

OSGiken LSD purchase questions!

olddudesrule · 06-02-2013, 12:45 PM

Thanks Triple! That's it, the Nismo JDM cover. Crap, didn't remember that it was for 350's.

Jordo! · 06-02-2013, 05:31 PM

Quote:

Originally Posted by olddudesrule

Thanks Triple! That's it, the Nismo JDM cover. Crap, didn't remember that it was for 350's.

I believe that part fits both the 350 and 370 diff.

SPOHN · 06-02-2013, 09:35 PM

I was asked not to say who. But a known company is going to be creating a billet piece diff cover with a little more capacity.

Baer383 · 06-02-2013, 09:53 PM

Quote:

Originally Posted by SPOHN

I was asked not to say who. But a known company is going to be creating a billet piece diff cover with a little more capacity.

Yes it is Wal-mart.

BGTV8 · 06-02-2013, 11:52 PM

Quote:

Originally Posted by SPOHN

I was asked not to say who. But a known company is going to be creating a billet piece diff cover with a little more capacity.

When ????

leighspped · 06-03-2013, 12:18 AM

Quote:

Originally Posted by SPOHN

I was asked not to say who. But a known company is going to be creating a billet piece diff cover with a little more capacity.

billet might offer enough extra cooling to get the extra dollar? more hot oil doesnt solve much

SPOHN · 06-03-2013, 06:32 AM

Quote:

Originally Posted by Baer383

Yes it is Wal-mart.

How did you know?

Quote:

Originally Posted by BGTV8

When ????

Not sure. Hopefully soon. They are making this do there's blowing out.

Quote:

Originally Posted by leighspped

billet might offer enough extra cooling to get the extra dollar? more hot oil doesnt solve much

The extra capacity will help a little. But this perticlular company had there diff cover blowout. And being the OEM cover is some form of cast aluminum, a billet covor with a little bit of extra capacity will help aid with cooling issues.

gbrettin · 06-04-2013, 12:38 AM

OP - Are you thinking of the Z1 Motorsports Rear Diff?

SPOHN - I'm guessing someone else is going to make a different Read Diff Plate other than Z1?

SPOHN · 06-04-2013, 06:01 AM

Yes it's someone else. But after talking to them again it might be a little bit. I guess it was just mentioned to get me going. Lol. But it will happen.

dP3NGU1N · 06-04-2013, 01:00 PM

The 370z and the 350z diff is exactly the same. To the point where you can use the same stub shaft assembly to rebuild it. (I'm using a 350 short shaft with 0 issues so far.)

TVPostSound · 06-04-2013, 01:58 PM

Quote:

Originally Posted by gbrettin

OP - Are you thinking of the Z1 Motorsports Rear Diff?

SPOHN - I'm guessing someone else is going to make a different Read Diff Plate other than Z1?

Z1 doesn't make the diff cover. Its a Nissan product.

Kingbaby · 06-04-2013, 02:12 PM

Quote:

Originally Posted by dP3NGU1N

The 370z and the 350z diff is exactly the same. To the point where you can use the same stub shaft assembly to rebuild it. (I'm using a 350 short shaft with 0 issues so far.)

informative post is informative

olddudesrule · 06-04-2013, 06:23 PM

Quote:

Originally Posted by gbrettin

OP - Are you thinking of the Z1 Motorsports Rear Diff?

SPOHN - I'm guessing someone else is going to make a different Read Diff Plate other than Z1?

Yup, that looks the same. Must have missed it, as I've been on their site, and have recently bought from them. Thanks!!

06-02-2013, 12:20 PM	#1 (permalink)
olddudesrule Enthusiast Member Join Date: Apr 2013 Location: Gilbert, AZ Posts: 252 Drives: 2012 Nismo Rep Power: 12	Deep finned diff cover?? I'm looking for a thread I saw in the last few months on a finned diff cover for the Z. I searched this section of the forum, and can't seem to find the one I was thinking about. It's not the one listed below, or the one on the GTM diff cooler from 2009-2011. Nismo finner diff cover I thought I remembered reading one that indicated that Nismo's had the finned housing from the factory, but I know my 2012 doesn't. Any pics, ideas or info? Not interested in installing a diff cooler or OS Giken rear at this time, just fishing for info. Thanks, Pete

06-02-2013, 12:28 PM	#2 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,732 Drives: 🔰 Rep Power: 10	I believe the cover is from a 350 But I found this and hope it helps OSGiken LSD purchase questions! __________________

06-02-2013, 09:35 PM	#5 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 46 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	I was asked not to say who. But a known company is going to be creating a billet piece diff cover with a little more capacity. olddudesrule likes this. __________________

06-04-2013, 06:01 AM	#11 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 46 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Yes it's someone else. But after talking to them again it might be a little bit. I guess it was just mentioned to get me going. Lol. But it will happen. __________________

06-04-2013, 01:00 PM	#12 (permalink)
dP3NGU1N A True Z Fanatic Join Date: Feb 2011 Location: Irvine Posts: 1,682 Drives: 13 PW sport 6mt Rep Power: 18	The 370z and the 350z diff is exactly the same. To the point where you can use the same stub shaft assembly to rebuild it. (I'm using a 350 short shaft with 0 issues so far.) Kingbaby likes this. __________________ 35% Hooper Optik \| Takeda Attack CAI \| F.I. HFC \| Hotchkis Sway Bar \| Stillen 24row \| OS Giken Super Lock LSD \| TK Shift Knob \| EVO-R Carbon Diffuser

06-02-2013, 12:45 PM	#3 (permalink)
olddudesrule Enthusiast Member Join Date: Apr 2013 Location: Gilbert, AZ Posts: 252 Drives: 2012 Nismo Rep Power: 12	Thanks Triple! That's it, the Nismo JDM cover. Crap, didn't remember that it was for 350's.

06-04-2013, 12:38 AM	#10 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,287 Drives: Tricycle Rep Power: 589151	OP - Are you thinking of the Z1 Motorsports Rear Diff? SPOHN - I'm guessing someone else is going to make a different Read Diff Plate other than Z1?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nismo diff cover	klill001	Nismo 370Z	12	09-04-2013 02:19 AM
Nismo finner diff cover	DriftKr6l	Engine & Drivetrain	4	04-29-2013 10:17 AM
[FOR SALE] Nismo 370z diff with 4.08 gears and nismo finned diff cover	MrVQHR	Parts for sale (Private Classifieds)	3	07-16-2012 10:05 PM
Z34/370Z air-cooling fin equipped diff. rear cover	AK370Z	Engine & Drivetrain	2	04-13-2009 11:35 AM