South Bend Flywheel TQ Specs

SPOHN · 01-12-2013, 10:50 PM

I'm getting ready to install my new clutch and flywheel from South Bend. What are the TQ specs for this? I've been reading up on this and what I've come across that some after market flywheels may have different specs from OEM flywheel.

Zat_Zuma · 01-13-2013, 02:04 PM

Best thing is to call/e-mail Joe and ask what are the proper torque specs for the flywheel, pressure plate and even the CSC mounting points are.

I always like to go to manufacturer/vendor and ask directly.

SPOHN · 01-13-2013, 02:15 PM

Quote:

Originally Posted by Zat_Zuma

Best thing is to call/e-mail Joe and ask what are the proper torque specs for the flywheel, pressure plate and even the CSC mounting points are.

I always like to go to manufacturer/vendor and ask directly.

Yea, that was my origianl thought come tomorrow.

MJB · 01-13-2013, 02:35 PM

Hey SPOHN, I believe its around 90-95lbs on the flywheel, but you may want to ask Joe. I think my installer used red lock-tite as well.

37Z · 01-13-2013, 05:09 PM

Which Southbend flywheel, Clutch plate,presure plate,CSC release bearing did you go with?

I may be face with replacing my stock CSC bearing, etc next week if not covered under warranty!

SPOHN · 01-14-2013, 06:37 PM

90lbs is the TQ.

OldBoy · 01-14-2013, 10:33 PM

Quote:

Originally Posted by MJB

Hey SPOHN, I believe its around 90-95lbs on the flywheel, but you may want to ask Joe. I think my installer used red lock-tite as well.

Red lock-tite should always be used when installing a flywheel, always.

B&W_Evader · 01-15-2013, 10:33 AM

You may never get them back off if you used the red. I'd use blue if anything.

SPOHN · 01-15-2013, 11:08 AM

I was told to use blue.

OldBoy · 01-15-2013, 09:00 PM

Quote:

Originally Posted by B&W_Evader

You may never get them back off if you used the red. I'd use blue if anything.

Never had any problems taking them out. Blue is better than nothing tho.

01-12-2013, 10:50 PM	#1 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 46 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	South Bend Flywheel TQ Specs I'm getting ready to install my new clutch and flywheel from South Bend. What are the TQ specs for this? I've been reading up on this and what I've come across that some after market flywheels may have different specs from OEM flywheel. __________________

01-13-2013, 02:04 PM	#2 (permalink)
Zat_Zuma A True Z Fanatic Join Date: Nov 2008 Location: Edmonton, Alberta ...eh Posts: 1,171 Drives: 2017 Touring auto Rep Power: 19	Best thing is to call/e-mail Joe and ask what are the proper torque specs for the flywheel, pressure plate and even the CSC mounting points are. I always like to go to manufacturer/vendor and ask directly. SPOHN and GaleForce like this. __________________ [B]2009 & 2017 370Z Touring Sport Autos SOLD

01-13-2013, 02:35 PM	#4 (permalink)
MJB A True Z Fanatic Join Date: Aug 2011 Location: Tacoma, WA Age: 41 Posts: 1,498 Drives: a POS truck Rep Power: 496	Hey SPOHN, I believe its around 90-95lbs on the flywheel, but you may want to ask Joe. I think my installer used red lock-tite as well. __________________ 09 Nismo #0483 sold. Viper or C7 next time around.

01-13-2013, 05:09 PM	#5 (permalink)
37Z Enthusiast Member Join Date: Jun 2009 Location: Florida Posts: 476 Drives: 370Z MB 6M -sold Rep Power: 263	Southbend Flywheel Which Southbend flywheel, Clutch plate,presure plate,CSC release bearing did you go with? I may be face with replacing my stock CSC bearing, etc next week if not covered under warranty!

01-14-2013, 06:37 PM	#6 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 46 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	90lbs is the TQ. __________________

01-15-2013, 10:33 AM	#8 (permalink)
B&W_Evader Track Member Join Date: Aug 2011 Location: CA Posts: 972 Drives: slower than before Rep Power: 387	You may never get them back off if you used the red. I'd use blue if anything. __________________ \|RIP\|6spd-sport\|OSG-LSD\|XP8\|RBF600\|Eibach Sways\|RE-71R\|FI-34Row\|Gen3-CAI\|Yaw P.S.\|

01-15-2013, 11:08 AM	#9 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 46 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	I was told to use blue. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
South Bend DXD Xtreme Duty Clutch and Flywheel + HD Slave Kit	Joe@ZSpeed	Drivetrain/Engine	75	07-14-2017 02:53 PM
South Bend Clutch-bad install	OKC Z	Engine & Drivetrain	23	07-06-2015 07:07 AM
South Bend DXD Flywheel VS 18lb Flywheel Videos	Joe@ZSpeed	Engine & Drivetrain	5	07-12-2012 07:50 AM