Ticking noise!!!!

mokhan996 · 08-09-2023, 01:48 PM

Hey everyone. So my ‘13 370Z with 42k miles, is now ticking. I haven’t driven it nor started it since February. I finally got it started last week after a hard hesitation to turn it over, and it began ticking pretty loud (loud to me at least). Did the oil change this past Saturday and started it. Ticking was there, got it up to operating temperature and at 140 oil temp, still ticking. Revved it slightly and it began to tick faster/louder. Once it got to 180 oil temp, it completely went away. Revved it to 4K and it sounded beautiful. Oil level is where it should be. Didn’t drive it, let it sit overnight and started it the night after and it began ticking but this time, not as violent sounding. Got it up to 180 oil temp again and disappeared. Do I have a bad lifter? Any input here? I have no Check Engine Light or Codes. Please help! Losing my mind.

Elmo370z · 08-09-2023, 01:58 PM

Leprechaun tapping a wrench on metal while you start the car

Dreadnaught · 08-12-2023, 06:13 PM

Sounds like you have a piston that's slapping around. You should get a bore scope and inspect each cylinder for wear. From my experience, rod knock is always constant.

Dreadnaught · 08-12-2023, 06:15 PM

Or you could also take off your valve covers and inspect the valve train for issues.

08-09-2023, 01:48 PM	#1 (permalink)
mokhan996 Base Member Join Date: May 2018 Location: New Jersey Posts: 124 Drives: 2013 Nissan 370Z Rep Power: 7	Ticking noise!!!! Hey everyone. So my ‘13 370Z with 42k miles, is now ticking. I haven’t driven it nor started it since February. I finally got it started last week after a hard hesitation to turn it over, and it began ticking pretty loud (loud to me at least). Did the oil change this past Saturday and started it. Ticking was there, got it up to operating temperature and at 140 oil temp, still ticking. Revved it slightly and it began to tick faster/louder. Once it got to 180 oil temp, it completely went away. Revved it to 4K and it sounded beautiful. Oil level is where it should be. Didn’t drive it, let it sit overnight and started it the night after and it began ticking but this time, not as violent sounding. Got it up to 180 oil temp again and disappeared. Do I have a bad lifter? Any input here? I have no Check Engine Light or Codes. Please help! Losing my mind.

08-09-2023, 01:58 PM	#2 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,709 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	Leprechaun tapping a wrench on metal while you start the car JARblue and Optimiser like this.

08-12-2023, 06:13 PM	#3 (permalink)
Dreadnaught Track Member Join Date: Dec 2009 Location: Farmington, Utah Posts: 582 Drives: 14 SR 370z 6MT Rep Power: 10140	Sounds like you have a piston that's slapping around. You should get a bore scope and inspect each cylinder for wear. From my experience, rod knock is always constant. __________________ Ford Diesel and Heavy Line Technician at your service.

08-12-2023, 06:15 PM	#4 (permalink)
Dreadnaught Track Member Join Date: Dec 2009 Location: Farmington, Utah Posts: 582 Drives: 14 SR 370z 6MT Rep Power: 10140	Or you could also take off your valve covers and inspect the valve train for issues. __________________ Ford Diesel and Heavy Line Technician at your service.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Ticking Noise	mokhan996	Engine & Drivetrain	3	08-07-2023 05:02 PM
Ticking noise when rolling	CreepiestRapt	Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs	6	03-02-2022 11:16 AM
Ticking noise above 45mph	owenismo	Engine & Drivetrain	1	11-21-2016 05:42 AM
Ticking noise while shifting	ALTN8NRG	Engine & Drivetrain	4	07-01-2012 06:19 AM
Ticking noise	zrider	Intake/Exhaust	14	07-27-2010 04:57 PM