CSC or Master cylinder.? ...and which flywheel/clutch kit to buy

Pktaske · 05-09-2023, 03:15 PM

96k on my 2009 and the pedal is not coming up without assistance. Can't get in in a low gear at all. Rode home last night in 5th gear, avoided lights and coasted into driveway.

I'm assuming this is the CSC...but is it possibly the Master? I read through many pages of the sticky but its so looong. Any quick way to check MC vs CSC? There is lots of fluid still in my reservoir in case anyone was wondering.

With almost 100k, I'm probably going in for a clutch anyway so - which kit should I get? its a DD and I don't plan to track. I do, however, beat the hell out of it on the street.

Thx...Nick

vtec to vvel · 05-09-2023, 04:17 PM

If the pedal is not coming up, then it's the CSC. If the pedal is coming up and you're only experiencing fluid loss, then it's the CMC. But, replace both, as well as the clutch/flywheel.

Go with ZSpeed.

sx moneypit · 05-09-2023, 05:07 PM

Quote:

Originally Posted by vtec to vvel

If the pedal is not coming up, then it's the CSC. If the pedal is coming up and you're only experiencing fluid loss, then it's the CMC. But, replace both, as well as the clutch/flywheel.

Go with ZSpeed.

ZoomZ · 05-10-2023, 12:18 PM

Just did the Zspeed ez-street C/FW and CMACK. Great upgrade but be aware of light weight flywheel noise if you go that route.

05-09-2023, 03:15 PM	#1 (permalink)
Pktaske Base Member Join Date: Dec 2015 Location: NJ Posts: 17 Drives: 2009 370Z Coupe Rep Power: 9	CSC or Master cylinder.? ...and which flywheel/clutch kit to buy 96k on my 2009 and the pedal is not coming up without assistance. Can't get in in a low gear at all. Rode home last night in 5th gear, avoided lights and coasted into driveway. I'm assuming this is the CSC...but is it possibly the Master? I read through many pages of the sticky but its so looong. Any quick way to check MC vs CSC? There is lots of fluid still in my reservoir in case anyone was wondering. With almost 100k, I'm probably going in for a clutch anyway so - which kit should I get? its a DD and I don't plan to track. I do, however, beat the hell out of it on the street. Thx...Nick

05-09-2023, 04:17 PM	#2 (permalink)
vtec to vvel A True Z Fanatic Join Date: Feb 2015 Location: 813 Posts: 3,915 Drives: 13 Z Rep Power: 502909	If the pedal is not coming up, then it's the CSC. If the pedal is coming up and you're only experiencing fluid loss, then it's the CMC. But, replace both, as well as the clutch/flywheel. Go with ZSpeed. ZoomZ and KapitalZ like this. __________________ Don't like what I post? Too bad. I really don't give a sh!t

05-10-2023, 12:18 PM	#4 (permalink)
ZoomZ Track Member Join Date: Jan 2017 Location: Vancouver, BC Posts: 760 Drives: 17' 370Z Nismo Rep Power: 40617	Just did the Zspeed ez-street C/FW and CMACK. Great upgrade but be aware of light weight flywheel noise if you go that route. KapitalZ likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] RJM Pedal Rev3.3, Tilton HD Master Cylinder, JWT HD Clutch Slave Cylinder ALMOST NEW	CyFi6	Parts for sale (Private Classifieds)	6	12-23-2020 03:55 PM
Replacing Clutch master cylinder and Slave cylinder?	s2krazyyy	Engine & Drivetrain	5	01-20-2018 02:03 PM
GT//Monsters Clutch Kits Flywheel Shop - Clutch Master \|\| Competition Clutch \|\| SPEC	gtmonsters	Drivetrain/Engine	189	10-31-2015 12:41 AM
Replacing the clutch line and clutch master cylinder	djrelic	DIY Section (Do-It-Yourself)	1	05-12-2014 02:46 PM
Clutch master cylinder went out again	Zenmaster	Engine & Drivetrain	4	03-26-2013 01:54 AM