|
Unfortunately while jacking my car up it slipped off the subframe jacking point and onto my oil pan. The oil pan and oil pick up tube was damaged and I
|
|||||||
10Likes
|
|
LinkBack | Thread Tools | Display Modes |
04-04-2023, 07:16 AM
|
#1 (permalink) |
|
Base Member
Join Date: Aug 2017
Location: Australia
Posts: 65
Drives: 2012 370z white
Rep Power: 8  |
Oil pick up tube replacement help needed
Unfortunately while jacking my car up it slipped off the subframe jacking point and onto my oil pan. The oil pan and oil pick up tube was damaged and I have ordered replacement parts. My question is, when fitting the oil pick up tube should I use RTV sealant on the mating surface or does it just bolt as is direct to the oil pump. Appreciate any advice. Thanks 👍
|
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Z1 long tube intakes VS Z1 Maf silicone tube + high flow filters | 19NismoZ | Intake/Exhaust | 15 | 07-16-2021 09:48 PM |
| 370z stock fuel pump replacement info needed | shortyz50 | DIY Section (Do-It-Yourself) | 9 | 09-05-2017 05:20 PM |
| Help me pick my Rotors and pad (Akebono stock replacement) + Motive Bleeder & fluid | AK370Z | Brakes & Suspension | 69 | 03-12-2015 12:44 AM |
| Replacement Hood Suggestions Needed | tlr3715 | Nissan 370Z General Discussions | 4 | 03-31-2014 02:19 PM |
| Tube Size needed for brake bleeding | mprog | Brakes & Suspension | 3 | 10-17-2012 03:33 PM |
Threaded Mode
