Throttle relay is off?

Snusk · 10-08-2022, 12:34 AM

My 370Z is in limp mode throwing p1606. I bought the Z1 Motorsports scanner and ran through modules and noticed that relay is off, is that bad?

THE BULL · 10-10-2022, 12:26 PM

The throttle relay is in the IPDM.

Usually when the relay stops working is due to throttle body connections or the big black E3 square plug that goes to the VVEL module.

This connector holds VVEL and IPDM wiring and houses the signal to throttles and the ground for the Throttle relay.

Most likely there is a faulty connection in this connector (usually debris since it's pointed upwards)

I see you said Z1 scanned it, is the vehicle running Ecutek/Uprev?
There is some limited documented info on Ecutek/Uprev giving this issue due to software bug. A flash to stock can resolve this issue as well.

Good luck.

Snusk · 10-11-2022, 10:47 PM

Quote:

Originally Posted by THE BULL

The throttle relay is in the IPDM.

Usually when the relay stops working is due to throttle body connections or the big black E3 square plug that goes to the VVEL module.

This connector holds VVEL and IPDM wiring and houses the signal to throttles and the ground for the Throttle relay.

Most likely there is a faulty connection in this connector (usually debris since it's pointed upwards)

I see you said Z1 scanned it, is the vehicle running Ecutek/Uprev?
There is some limited documented info on Ecutek/Uprev giving this issue due to software bug. A flash to stock can resolve this issue as well.

Good luck.

Thank you for responding, sorry for the ever but I said I bought a Z1 scanner lol, gonna check it out. But I have another question, I noticed when I unplugged my ECM one of the connectors didn't have a metal pin like the other holes? is it just the open slot??

Tractionless · 10-16-2022, 09:31 AM

Quote:

Originally Posted by Snusk

Thank you for responding, sorry for the ever but I said I bought a Z1 scanner lol, gonna check it out. But I have another question, I noticed when I unplugged my ECM one of the connectors didn't have a metal pin like the other holes? is it just the open slot??

Yes if there isn't a wire to that slot that looks open and the pin didn't push back into the connector is was always "open".

10-08-2022, 12:34 AM	#1 (permalink)
Snusk Base Member Join Date: Dec 2021 Location: Oahu Posts: 22 Drives: 09 Nissan 370z 6sp Rep Power: 4	Throttle relay is off? My 370Z is in limp mode throwing p1606. I bought the Z1 Motorsports scanner and ran through modules and noticed that relay is off, is that bad?

10-10-2022, 12:26 PM	#2 (permalink)
THE BULL Base Member Join Date: Apr 2021 Location: Florida Posts: 217 Drives: G37S Rep Power: 26848	The throttle relay is in the IPDM. Usually when the relay stops working is due to throttle body connections or the big black E3 square plug that goes to the VVEL module. This connector holds VVEL and IPDM wiring and houses the signal to throttles and the ground for the Throttle relay. Most likely there is a faulty connection in this connector (usually debris since it's pointed upwards) I see you said Z1 scanned it, is the vehicle running Ecutek/Uprev? There is some limited documented info on Ecutek/Uprev giving this issue due to software bug. A flash to stock can resolve this issue as well. Good luck. Rusty likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
A/C Relay Location?	shenaNickans	Nissan 370Z Owners Manual / Service Manuals	1	02-09-2022 03:33 PM
Latching Relay or Non Latching Relay	asht	Exterior & Interior	1	04-01-2020 09:50 AM
Help!! DVD relay not working	Bigviet23	Audio & Video	3	12-04-2012 02:53 PM
Headlight Relay	JMac88	Exterior & Interior	2	08-26-2012 07:59 PM
370Z FI Throttle Response: Boost vs. Throttle Position	DIGItonium	Forced Induction	9	01-23-2011 09:49 PM