Cel

Zezus · 07-22-2020, 06:42 PM

So before I just start buying $200 sensors to see if they fix the problem, I thought I'd ask here first:

Mods -
Motordyne Art Pipes
Motordyne Shockwave
K&N intakes

Codes-
P1168
P0051
P2096
P2097

The art pipes are the most recent mod I've installed. Everything was good for probably 1k miles before the CEL came on. I knew I had broken a bolt on the install so I figured after I had that fixed, the light would go out. I got that fixed and I still have the following codes:

I think p1168 and p0051 are on due to that sensor being faulty now. I've done some research and I'm pretty sure I have a bad o2 sensor on bank 2 sensor
1.

I'm thinking the 2096 and 2098 codes are on because of the test pipes.

I think my solution here is replace sensor 2 bank 1, and get a tune. Does anyone else have any input? Yes I have reset the CEL and these are what came back.

Sorry I cant figure out how to rotate the pic from the phone

Sent from my SM-G965U using Tapatalk

Ghostvette · 07-27-2020, 01:47 PM

O2 sensor 1 are the ones before the cats, those are really Air/fuel Ratio sensors. It is logical that you are getting a lean condition, you've opened up the engine's breathing. A tune will likely fix your issues.

07-22-2020, 06:42 PM	#1 (permalink)
Zezus Enthusiast Member Join Date: Dec 2018 Location: Cincinnati Posts: 354 Drives: 2016 370z sport 6spd Rep Power: 50338	Cel So before I just start buying $200 sensors to see if they fix the problem, I thought I'd ask here first: Mods - Motordyne Art Pipes Motordyne Shockwave K&N intakes Codes- P1168 P0051 P2096 P2097 The art pipes are the most recent mod I've installed. Everything was good for probably 1k miles before the CEL came on. I knew I had broken a bolt on the install so I figured after I had that fixed, the light would go out. I got that fixed and I still have the following codes: I think p1168 and p0051 are on due to that sensor being faulty now. I've done some research and I'm pretty sure I have a bad o2 sensor on bank 2 sensor 1. I'm thinking the 2096 and 2098 codes are on because of the test pipes. I think my solution here is replace sensor 2 bank 1, and get a tune. Does anyone else have any input? Yes I have reset the CEL and these are what came back. Sorry I cant figure out how to rotate the pic from the phone Sent from my SM-G965U using Tapatalk

07-27-2020, 01:47 PM	#2 (permalink)
Ghostvette A True Z Fanatic Join Date: Aug 2013 Location: Shawnee KS Posts: 5,698 Drives: 15 Magma Red 6MT Rep Power: 2684377	O2 sensor 1 are the ones before the cats, those are really Air/fuel Ratio sensors. It is logical that you are getting a lean condition, you've opened up the engine's breathing. A tune will likely fix your issues. Zezus likes this. __________________ 2015 Magma Red 6MT Sport Tech/2012 Fairlady MB 6MT Base (RIP 08032018)https://www.nicoclub.com/FSM/370Z/Coupe/