ID 1050X injector seating question

NissanTracker · 06-07-2020, 06:32 PM

Hi forum,

Almost completed the A-A kit on my 350z HR. I pulled out the GTR injectors and proceeded to Install the 1050x's. There is a spacer included. These are not going in as firm as the Denso GTR's. I screwed down the fuel rail, they look in there... But spacer has some (very very little) up and down play. Are these installed correctly?

I added them on the fuel rail first, then installed them as an entire assembly.

Thanks for the help

-NT

Gooch · 06-07-2020, 10:30 PM

I just installed mine about a month ago.

I personally don’t remember there being any spacers and I also used ID 1050’s. Do you mean the metal spacer looking thing above the port-side o-ring? They have some play, but shouldn’t be a problem once fully seated. Make sure you give the rails a firm push when installing them into the fuel ports.. Also, make sure your bracket clips are installed the right way. I wasn’t paying attention and almost got them all the way in there upside down, which caused them to kind of pop up like that.

NissanTracker · 06-07-2020, 10:38 PM

Yes, that metal spacer. I double checked the clips, they are in correctly. I took them out and reinstalled. They went in better the second time (and some good ol' fashion spit for lube... Lol)

Gooch · 06-07-2020, 10:54 PM

Well, if the o-rings are lubed and brackets the right way up.. push that sucker in, bolt it down and send it! Have fun.

MattWll · 06-09-2020, 08:48 AM

How is the process moving?

NissanTracker · 06-09-2020, 02:37 PM

Quote:

Originally Posted by MattWll

How is the process moving?

Just upgraded my power steering cooler and putting the manifold back on. I picked up a set of GT MAFS and Seb from specialtyZ already gave me a base tune. Just need the time to finish up. This weekend I'll flash and start logging

NissanTracker · 06-23-2021, 12:20 AM

Update, install went great. Smooth. No issues with seating the injectors. After the A-A upgrade, flywheel+clutch, and 1 size down on the S.C. pulley, trapped 455wHP (350z HR). At the point where my supercharger is probably just blowing heat.

06-07-2020, 06:32 PM	#1 (permalink)
NissanTracker Track Member Join Date: Jun 2016 Location: Massachusetts Posts: 724 Drives: 07' Nismo, 14' Nismo Rep Power: 29262	ID 1050X injector seating question Hi forum, Almost completed the A-A kit on my 350z HR. I pulled out the GTR injectors and proceeded to Install the 1050x's. There is a spacer included. These are not going in as firm as the Denso GTR's. I screwed down the fuel rail, they look in there... But spacer has some (very very little) up and down play. Are these installed correctly? I added them on the fuel rail first, then installed them as an entire assembly. Thanks for the help -NT

06-07-2020, 10:30 PM	#2 (permalink)
Gooch Base Member Join Date: Nov 2016 Location: Washington State Posts: 69 Drives: 15 370z 6MT Nismo Rep Power: 9	I just installed mine about a month ago. I personally don’t remember there being any spacers and I also used ID 1050’s. Do you mean the metal spacer looking thing above the port-side o-ring? They have some play, but shouldn’t be a problem once fully seated. Make sure you give the rails a firm push when installing them into the fuel ports.. Also, make sure your bracket clips are installed the right way. I wasn’t paying attention and almost got them all the way in there upside down, which caused them to kind of pop up like that. __________________ '15 370z Nismo Tech 6MT Magnetic Black, V2 BP Kit 6467 Unexploded Turbo \| '06 350z Touring 6MT Carbon Silver

06-07-2020, 10:54 PM	#4 (permalink)
Gooch Base Member Join Date: Nov 2016 Location: Washington State Posts: 69 Drives: 15 370z 6MT Nismo Rep Power: 9	Well, if the o-rings are lubed and brackets the right way up.. push that sucker in, bolt it down and send it! Have fun. __________________ '15 370z Nismo Tech 6MT Magnetic Black, V2 BP Kit 6467 Unexploded Turbo \| '06 350z Touring 6MT Carbon Silver

06-23-2021, 12:20 AM	#7 (permalink)
NissanTracker Track Member Join Date: Jun 2016 Location: Massachusetts Posts: 724 Drives: 07' Nismo, 14' Nismo Rep Power: 29262	Update, install went great. Smooth. No issues with seating the injectors. After the A-A upgrade, flywheel+clutch, and 1 size down on the S.C. pulley, trapped 455wHP (350z HR). At the point where my supercharger is probably just blowing heat. Optimiser likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Injector Dynamics 1050x ( New in Box )	Hidalgo	Parts for sale (Private Classifieds)	4	02-14-2020 08:43 AM
2015+ Nismo Wheels Lug Nuts Seating Type Question	Overlimit	Wheels & Tires	2	12-16-2016 06:43 PM
09 GTR fuel injector question?	arnoldas	Tuning	0	03-22-2016 06:23 PM
Question about injector cleaners and similar products	RiCharlie	Engine & Drivetrain	10	04-30-2013 01:03 PM
370z seating question. please help	juan05	Nissan 370Z General Discussions	12	04-12-2009 08:36 PM

06-07-2020, 10:38 PM	#3 (permalink)
NissanTracker Track Member Join Date: Jun 2016 Location: Massachusetts Posts: 724 Drives: 07' Nismo, 14' Nismo Rep Power: 29262	Yes, that metal spacer. I double checked the clips, they are in correctly. I took them out and reinstalled. They went in better the second time (and some good ol' fashion spit for lube... Lol)

06-09-2020, 08:48 AM	#5 (permalink)
MattWll Base Member Join Date: Jun 2020 Location: Florida Posts: 3 Drives: Nissan 370Z Rep Power: 5	How is the process moving?