Serpentine Belt with ATI Damper

rovert · 03-28-2020, 09:25 AM

Hi Guys,
I've just fitted my ATI Damper as part of my build & noticed the Auto Belt Tensioner is now past the usable Tension Mark on it.
I did notice before fitting the Pulley that it is slightly smaller & figured this may be the result.
What belt are all of you other ATI Damper guys using now?
Cheers.
Trevor.

JARblue · 03-28-2020, 12:19 PM

Which ATI Part # did you get? I accidentally ordered the undersized pulley (918584), and now I'm trying to find out the part number for the stock size wet sump application pulley. I have reached out to MA Motorsports regarding this.

To replace the stock belt, I purchased Gates Racing Serpentine Belt Part #K070795RPM.

rovert · 03-28-2020, 06:45 PM

Thanks for the reply Mate.
I purchased mine in the 2nd group buy here on the forum.
I assumed it was stock size but obviously not. Same part number as yours, 4% under driven. All of the others on the ATI website are listed as Dry Sump only. Maybe its the only one they do.
http://www.atiracing.com/products/da.../damnissan.htm

Spooler · 03-28-2020, 06:52 PM

I run a stock Nissan belt and have had no issues.

Rusty · 03-28-2020, 06:54 PM

I got mine on the group from MAM. I'm using the oem belt. Yea, the tensioner is at the limit. I've got over 4,000 miles on it so far.

rovert · 03-28-2020, 08:55 PM

Quote:

Originally Posted by Rusty

Yea, the tensioner is at the limit. I've got over 4,000 miles on it so far.

Yes that's where it ended up on my install, i've just checked it & there appears to still be a fair bit of pressure being applied by the tensioner. I'm sure it'll be fine, the next smaller belt size I can find is 20mm shorter & it would be to short.
Thanks Guys.

redondoaveb · 03-28-2020, 09:49 PM

According to Concept Z, the stock belt can be utilized.

"The patented ATI Super Damper is the only damper designed exclusively for high performance engines. This is the closest model to stock and is a 4% underdrive pulley, but can still be used with the stock belt and accessories with no negative effects"

Quicksilvers · 03-29-2020, 05:38 AM

ATI Super Damper is one of the pulleys I ran for many years with no issues on the street or strip would recommend it with only the 4% underdrive. Just inspected the pulley every oil change and changed the belt on time.

Spooler · 03-29-2020, 01:22 PM

Quote:

Originally Posted by Rusty

I got mine on the group from MAM. I'm using the oem belt. Yea, the tensioner is at the limit. I've got over 4,000 miles on it so far.

Chickenchit miles. I put over 40k miles on mine.

rovert · 03-30-2020, 03:03 AM

Thanks for the help Guys, much appreciated.

03-28-2020, 09:25 AM	#1 (permalink)
rovert Base Member Join Date: Nov 2015 Location: Australia Posts: 64 Drives: 08 Skyline 370GT Rep Power: 10	Serpentine Belt with ATI Damper Hi Guys, I've just fitted my ATI Damper as part of my build & noticed the Auto Belt Tensioner is now past the usable Tension Mark on it. I did notice before fitting the Pulley that it is slightly smaller & figured this may be the result. What belt are all of you other ATI Damper guys using now? Cheers. Trevor. __________________ 08 Skyline 370GT SP Coupe 5AT: Diy TT

03-28-2020, 12:19 PM	#2 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	Which ATI Part # did you get? I accidentally ordered the undersized pulley (918584), and now I'm trying to find out the part number for the stock size wet sump application pulley. I have reached out to MA Motorsports regarding this. To replace the stock belt, I purchased Gates Racing Serpentine Belt Part #K070795RPM. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

03-28-2020, 06:45 PM	#3 (permalink)
rovert Base Member Join Date: Nov 2015 Location: Australia Posts: 64 Drives: 08 Skyline 370GT Rep Power: 10	Thanks for the reply Mate. I purchased mine in the 2nd group buy here on the forum. I assumed it was stock size but obviously not. Same part number as yours, 4% under driven. All of the others on the ATI website are listed as Dry Sump only. Maybe its the only one they do. http://www.atiracing.com/products/da.../damnissan.htm __________________ 08 Skyline 370GT SP Coupe 5AT: Diy TT

03-28-2020, 06:54 PM	#5 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,180 Drives: 2011 Nismo GM 6M Rep Power: 2684437	I got mine on the group from MAM. I'm using the oem belt. Yea, the tensioner is at the limit. I've got over 4,000 miles on it so far. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

03-28-2020, 09:49 PM	#7 (permalink)
redondoaveb A True Z Fanatic Join Date: Apr 2017 Location: So. Commiefornia Posts: 6,360 Drives: 2014 Nismo Gunmetal Rep Power: 2684374	According to Concept Z, the stock belt can be utilized. "The patented ATI Super Damper is the only damper designed exclusively for high performance engines. This is the closest model to stock and is a 4% underdrive pulley, but can still be used with the stock belt and accessories with no negative effects" JARblue likes this. __________________ Fast Intentions "Stage Seb" twin turbo #098- Specialty Z/Tial-Xonarotor/CJM/Ecutek/HKS/KW/SPL/Hotchkis/Rohana/Toyo 700+whp

03-28-2020, 06:52 PM	#4 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,797 Drives: 2013 Nismo 370z Rep Power: 2684392	I run a stock Nissan belt and have had no issues.

03-29-2020, 05:38 AM	#8 (permalink)
Quicksilvers A True Z Fanatic Join Date: May 2017 Location: Atlanta, GA Posts: 2,039 Drives: 2017 370z Rep Power: 25463	ATI Super Damper is one of the pulleys I ran for many years with no issues on the street or strip would recommend it with only the 4% underdrive. Just inspected the pulley every oil change and changed the belt on time. __________________ Mr. Clean

03-30-2020, 03:03 AM	#10 (permalink)
rovert Base Member Join Date: Nov 2015 Location: Australia Posts: 64 Drives: 08 Skyline 370GT Rep Power: 10	Thanks for the help Guys, much appreciated. __________________ 08 Skyline 370GT SP Coupe 5AT: Diy TT

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Serpentine Belt	igbad	Parts for sale (Private Classifieds)	8	02-13-2017 11:25 AM
Serpentine belt brands...	shfeddy	Forced Induction	17	12-18-2016 04:18 PM
Which Serpentine Belt to consider?	shfeddy	Forced Induction	0	09-29-2014 03:29 PM
Serpentine belt on GTM SC Stage 1	wind.zero	Forced Induction	13	07-18-2013 10:41 AM
Serpentine Belt replacement	BGTV8	Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs	1	03-25-2013 10:07 PM