Suckerpunch Motorsports Oil Pump Upgrade

Total D · 10-11-2019, 03:19 AM

SuckerPunch Motorsports LLC Billet HR/VHR Oil Pump with Billet Gears and Billet Back Plate

Hey guys, not sure if some of you know about our oil pump upgrade for the HR/VHR.

We've worked on coming up with a solution for oil pump gears, that would handle higher RPMs and creates less cavitation. With a shortage of complete options available for the VQ motors, we decided it was time to get busy. We started with a Nismo pump and an OEM pump, so we could make sure that, we were offering the best oil pump on the market.

Gear Details:
* Drop in
* Hardness of gears is twice that of stock gears, and not brittle like other gears on the market
* RPM Range: 8500RPMS (With supporting internals of course), same gears running 8600rpm at 6bar of pressure in a road race build currently.
* Billet Heat Treated Hardened 17-4 Stainless Steel
* Moly Ceramic Dry Film Lubricant Coating
* Tolerances within .0005" of the original gear.

***Anything over stock RPM. We suggest having the proper supporting mods to work with our pumps. After 8500, I would suggest looking at dry sump setup.***

-------------------------------------------------------------------------------------------

Back Plate Details:
* Bolt on
* 7075 Aluminum
* Eliminates the flex
* Brand Logo, for authenticity
-------------------------------------------------------------------------------------------

Oil Pump Details
* Helps Eliminate cavitation during higher rpms.
* Better flow with ~10% increase in stock pump (our gears not installed)
* Larger Volume of flow throughout the rpms, stock held around 5" of vacuum, whereas after modifications,the pump held 20" of vacuum.

We have many pumps out in the community already and they are performing flawlessly. If you guys are interested in our pump for your build, there is a group buy going on, which ends the 21st of this month, so we can deliver them before the end of the year.

GB price is $1150, deposit of $750, remaining due when ready to ship.

Thanks for the support!

Regards,
Jeremiah

10-11-2019, 03:19 AM	#1 (permalink)
Total D Base Member Join Date: Apr 2011 Location: USA Posts: 159 Drives: 03 Nissan 350z PPW M Rep Power: 6725	Suckerpunch Motorsports Oil Pump Upgrade SuckerPunch Motorsports LLC Billet HR/VHR Oil Pump with Billet Gears and Billet Back Plate Hey guys, not sure if some of you know about our oil pump upgrade for the HR/VHR. We've worked on coming up with a solution for oil pump gears, that would handle higher RPMs and creates less cavitation. With a shortage of complete options available for the VQ motors, we decided it was time to get busy. We started with a Nismo pump and an OEM pump, so we could make sure that, we were offering the best oil pump on the market. Gear Details: * Drop in * Hardness of gears is twice that of stock gears, and not brittle like other gears on the market * RPM Range: 8500RPMS (With supporting internals of course), same gears running 8600rpm at 6bar of pressure in a road race build currently. * Billet Heat Treated Hardened 17-4 Stainless Steel * Moly Ceramic Dry Film Lubricant Coating * Tolerances within .0005" of the original gear. *Anything over stock RPM. We suggest having the proper supporting mods to work with our pumps. After 8500, I would suggest looking at dry sump setup.* ------------------------------------------------------------------------------------------- Back Plate Details: * Bolt on * 7075 Aluminum * Eliminates the flex * Brand Logo, for authenticity ------------------------------------------------------------------------------------------- Oil Pump Details * Helps Eliminate cavitation during higher rpms. * Better flow with ~10% increase in stock pump (our gears not installed) * Larger Volume of flow throughout the rpms, stock held around 5" of vacuum, whereas after modifications,the pump held 20" of vacuum. We have many pumps out in the community already and they are performing flawlessly. If you guys are interested in our pump for your build, there is a group buy going on, which ends the 21st of this month, so we can deliver them before the end of the year. GB price is $1150, deposit of $750, remaining due when ready to ship. Thanks for the support! Regards, Jeremiah JARblue, Rusty, Hotrodz and 1 others like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GB: SuckerPunch Motorsports Oil Pump Upgrade	Total D	Group Buys	372	12-27-2021 08:45 PM
RJM Oil Pump Gear Upgrade	RJ MFG	Drivetrain/Engine	15	11-10-2016 08:02 PM
CJ Motorsports Road race pump...	clintfocus	Track / Autocross / Drifting / Dragstrip	37	08-10-2014 07:55 PM
[FOR SALE] GTM Fuel Upgrade Kit- Pump, Injectors and Hardware (BRAND NEW)	jamesDJRPM	Parts for sale (Private Classifieds)	1	03-06-2014 08:13 PM
Nissan Motorsports Oil Pump	takjak2	Engine & Drivetrain	2	12-14-2013 05:17 PM