Tilton master cylinder VS ZSpeed/Z1

scope22 · 08-03-2019, 03:18 PM

Is there a difference? RJM is advertising these as HD ($328), looking at Tilton website it doesn't say anything about HD and they're much cheaper, about the same price as Z1/ZSpeed MC ($126)?

Tilton HD Master Cylinders for 370Z/G37

https://tiltonracing.com/product/76-...ter-cylinders/

https://zspeed.com/product/nissan-37...ster-cylinder/

cv129 · 08-03-2019, 03:52 PM

I would guess that the term “HD” applies in general to Tilton products, definitely higher resistant to failure vs our OEM unit.

And the RJM kit in the link isn’t just the CMC....adapters and things....low volume high quality fabrications cost money.

Rusty · 08-04-2019, 06:55 PM

The RJM pedal and Tilton master cylinder is a great set-up.

I'm installing the set-up this winter.

SS_Firehawk · 08-04-2019, 10:46 PM

My brother just replaced his RJM master with a Tilton unit after it failed. He mentioned that its a much beefier unit. Might be worthwhile to make the swap. He only had a few thousand miles before his failure. I have the RJM master and it's been fine, but like I said, I'm thinking about it.

08-03-2019, 03:18 PM	#1 (permalink)
scope22 A True Z Fanatic Join Date: Apr 2012 Location: Roswell, GA Posts: 1,179 Drives: wife crazy Rep Power: 55	Tilton master cylinder VS ZSpeed/Z1 Is there a difference? RJM is advertising these as HD ($328), looking at Tilton website it doesn't say anything about HD and they're much cheaper, about the same price as Z1/ZSpeed MC ($126)? Tilton HD Master Cylinders for 370Z/G37 https://tiltonracing.com/product/76-...ter-cylinders/ https://zspeed.com/product/nissan-37...ster-cylinder/

08-03-2019, 03:52 PM	#2 (permalink)
cv129 A True Z Fanatic Join Date: Jul 2011 Location: Dallas, TX Posts: 3,235 Drives: 09 Nismo, 16 Nismo Rep Power: 163995	I would guess that the term “HD” applies in general to Tilton products, definitely higher resistant to failure vs our OEM unit. And the RJM kit in the link isn’t just the CMC....adapters and things....low volume high quality fabrications cost money. gomer_110 and Rusty like this. __________________ Setrab \| RE-71 \| SPL \| JRZ \| Nismo \| ARK \| Whiteline \| RacingBrake \| CJM Oil Pan \| Ti shield

08-04-2019, 06:55 PM	#3 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,217 Drives: 2011 Nismo GM 6M Rep Power: 2684438	The RJM pedal and Tilton master cylinder is a great set-up. I'm installing the set-up this winter. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

08-04-2019, 10:46 PM	#4 (permalink)
SS_Firehawk Premium Member Join Date: Oct 2011 Location: Tampa Posts: 4,142 Drives: 13' Magma Red Nismo Rep Power: 7335	My brother just replaced his RJM master with a Tilton unit after it failed. He mentioned that its a much beefier unit. Might be worthwhile to make the swap. He only had a few thousand miles before his failure. I have the RJM master and it's been fine, but like I said, I'm thinking about it. __________________ Old Car:GTM TSC'd 550whp / 410lbft tq @ 11.88PSI New Car: Under Construction

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Tilton Gen2 HD Clutch Master Cylinder Kits for 370Z Now Available	Ryan @ RJM	Drivetrain/Engine	3	11-28-2019 09:59 PM
Replacing Clutch master cylinder and Slave cylinder?	s2krazyyy	Engine & Drivetrain	5	01-20-2018 02:03 PM
[WTB] Master cylinder	Whitel	Parts for sale (Private Classifieds)	9	09-08-2017 01:32 PM
Bad Master Cylinder?	ARrado15	Engine & Drivetrain	6	04-17-2016 05:30 AM
Master cylinder	Elmo370z	Engine & Drivetrain	4	01-05-2015 02:21 PM