3d printed AN bung?

sirnixalot · 07-09-2019, 10:47 AM

Probably not the right section but it's valve cover related?

Using hose clamps on braided AN hose is just...not for me. I was thinking about 3d printed 8AN male bungs with a stepped ID bore to slide over the valve cover breather ports and epoxy on. Or maybe having some machined from delrin?

I know you couldn't crank down on the fittings but it would make for a "cleaner" connection?

Am I barking up the wrong tree?

BettyZ · 07-09-2019, 11:58 AM

They sell AN hose ends that have a hidden hose clamp inside. I suppose you could put one on the hose, bore out the other one and fit it over the breather tube for a cleaner look? Or just the one on the hose?

My old ones looked like this (red)

Sent from my SM-G955U using Tapatalk

sirnixalot · 07-09-2019, 12:12 PM

Yeah I know about those clamps. I guess those are probably my best bet.

husam2012 · 07-09-2019, 01:23 PM

Check your PM!

07-09-2019, 10:47 AM	#1 (permalink)
sirnixalot Track Member Join Date: May 2017 Location: Cayman Islands Posts: 685 Drives: 2010 370Z Rep Power: 57454	3d printed AN bung? Probably not the right section but it's valve cover related? Using hose clamps on braided AN hose is just...not for me. I was thinking about 3d printed 8AN male bungs with a stepped ID bore to slide over the valve cover breather ports and epoxy on. Or maybe having some machined from delrin? I know you couldn't crank down on the fittings but it would make for a "cleaner" connection? Am I barking up the wrong tree? __________________ 2010 Sport - LS3 swap loading 2012 Frontier - BTWTuning VK56DE swap

07-09-2019, 11:58 AM	#2 (permalink)
BettyZ A True Z Fanatic Join Date: Aug 2018 Location: Chicagoland Age: 38 Posts: 5,261 Drives: A Garage Queen Rep Power: 2684371	They sell AN hose ends that have a hidden hose clamp inside. I suppose you could put one on the hose, bore out the other one and fit it over the breather tube for a cleaner look? Or just the one on the hose? My old ones looked like this (red) Sent from my SM-G955U using Tapatalk sirnixalot likes this. __________________ '14 MB Nismo \| Boost Lab 6870 1.32 AR 553 HP / 471 ft.-lbs. Betty Mods

07-09-2019, 12:12 PM	#3 (permalink)
sirnixalot Track Member Join Date: May 2017 Location: Cayman Islands Posts: 685 Drives: 2010 370Z Rep Power: 57454	Yeah I know about those clamps. I guess those are probably my best bet. __________________ 2010 Sport - LS3 swap loading 2012 Frontier - BTWTuning VK56DE swap

07-09-2019, 01:23 PM	#4 (permalink)
husam2012 Track Member Join Date: Mar 2015 Location: Michigan Posts: 550 Drives: 370Z Nismo Rep Power: 9469	Check your PM! __________________ Creator of the GTR TT Conversion Kit, NA Record Holder (401WHP) Ecutek Master Tuner (VQ37, VR30, VR38, B58, S55, S58) BTWTuning

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
3D printed battery tray for Odyssey PC680	SG4247	DIY Section (Do-It-Yourself)	35	10-31-2020 03:17 PM
Custom 3D Printed GTR Style Intake Plenum Project	Cpt. Obvious	Intake/Exhaust	115	05-17-2019 12:08 PM
3D printed battery tray for OPTIMA RED TOP	SG4247	DIY Section (Do-It-Yourself)	3	12-08-2018 06:36 PM
3d printed bead clamp	nismoZium	Wheels & Tires	1	04-23-2018 02:10 PM
Food Article Stolen and printed looks like the end for magazine	texasviking	The Lounge (Off Topic)	6	11-04-2010 07:47 PM