01-05-2022, 12:09 PM
|
#1 (permalink)
|
|
A True Z Fanatic
Join Date: Mar 2009
Location: Chicago
Posts: 3,669
Drives: 370
Rep Power: 974724
|
Quote:
Originally Posted by Maldat
So by reading this .
Im starting my car wrong ..
As I hop in, clutch in and push the button and 99.5% of the time car fires up, the other .5% is starts then dies ..
I should be hopping in, no feet on pedals, push the button twice .. .Then clutch in and fire up . .then engine is primed , as the non start days I put down to a little back draining in the fuel system thus lack of fuel
Just like I do with a car with a key , turn on for a few sec's before firing up ..
My 1st car with no key start
|
In typical use, there is no need to force a prime cycle before starting. Just hop in, clutch down, press button once; and you're off. It wasnt meant to be something people had to consciously do before starting the engine. A healthy fuel system will reach operating pressure in an INSTANT, quicker than the starter can have the crankshaft making meaningful revolutions.
Last edited by phunk; 01-05-2022 at 12:11 PM.
|
|
|
Similar Threads
9Likes
Hybrid Mode
