P0300 code cel blinking after csc replacement

Jspec921 · 04-26-2019, 07:18 PM

I just picked up my car from a shop for a master cylinder and csc replacement and today I noticed a blinking service engine light. Took it to Autozone for the codes and they said 3 p0300 codes and an o2 sensor. My question is, could the shop have done something to cause this? The car runs normal with no rough idle or loss of power that I can tell anyway. Just trying to think logically of what they could have done or is this just some bad coincidence. Thanks in advance for any advice.

1st · 04-26-2019, 07:35 PM

When the csc was replaced the transmission needed to be dropped. The o2 sensors have to be disconnected and are really delicate. Odds are who ever took them off was ruff with them and damaged them. New o2 sensors are needed. Maybe one or both.

Jspec921 · 04-26-2019, 07:51 PM

Thanks, I’m taking the car back to have them check it out.

1slow370 · 04-28-2019, 02:52 PM

There could be a million things that could have done it it could be them just alikely as it could be completely unrelated.

Jspec921 · 04-28-2019, 08:23 PM

Yea it’s so strange, I was on one bar of gas so I got 30 dollars worth and drove 2 miles to my house. Next day I get the flashing sel, I found that one of my oem intake hoses has a crack around the rubber. I siliconed the seal and disconnected my battery for 10 min. Drove 40 miles with no light on but then it came back except no flashing. It’s been about 60 miles and sel is still on but not flashing. Guess it’s time for the stillen gen 3 intake. I still need to change out my plugs and buy some new 02 sensors just in case.

04-26-2019, 07:18 PM	#1 (permalink)
Jspec921 Base Member Join Date: Feb 2017 Location: Pensacola fl Posts: 3 Drives: 370Z roadster 6 spd Rep Power: 8	P0300 code cel blinking after csc replacement I just picked up my car from a shop for a master cylinder and csc replacement and today I noticed a blinking service engine light. Took it to Autozone for the codes and they said 3 p0300 codes and an o2 sensor. My question is, could the shop have done something to cause this? The car runs normal with no rough idle or loss of power that I can tell anyway. Just trying to think logically of what they could have done or is this just some bad coincidence. Thanks in advance for any advice.

04-28-2019, 02:52 PM	#4 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7251	There could be a million things that could have done it it could be them just alikely as it could be completely unrelated. Jspec921 likes this. __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Code P0300	Zatanna Z	Engine & Drivetrain	33	01-24-2021 01:21 AM
P0300 Code Need Help!	Recker	Engine & Drivetrain	11	04-08-2017 04:51 PM
P0300 and p0175 error code	reynald3616	Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs	0	10-19-2015 02:21 PM
P0300 code after mods	Mfangman2024	Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs	1	02-25-2015 09:52 PM
Code P0300 after CBE install	ProfessorDave	Engine & Drivetrain	10	10-26-2010 05:42 PM

04-26-2019, 07:35 PM	#2 (permalink)
1st A True Z Fanatic Join Date: Jul 2012 Location: I 80 Biz U.S. 50 Posts: 1,708 Drives: Platinum Z Rep Power: 1616	When the csc was replaced the transmission needed to be dropped. The o2 sensors have to be disconnected and are really delicate. Odds are who ever took them off was ruff with them and damaged them. New o2 sensors are needed. Maybe one or both.

04-26-2019, 07:51 PM	#3 (permalink)
Jspec921 Base Member Join Date: Feb 2017 Location: Pensacola fl Posts: 3 Drives: 370Z roadster 6 spd Rep Power: 8	Thanks, I’m taking the car back to have them check it out.

04-28-2019, 08:23 PM	#5 (permalink)
Jspec921 Base Member Join Date: Feb 2017 Location: Pensacola fl Posts: 3 Drives: 370Z roadster 6 spd Rep Power: 8	Yea it’s so strange, I was on one bar of gas so I got 30 dollars worth and drove 2 miles to my house. Next day I get the flashing sel, I found that one of my oem intake hoses has a crack around the rubber. I siliconed the seal and disconnected my battery for 10 min. Drove 40 miles with no light on but then it came back except no flashing. It’s been about 60 miles and sel is still on but not flashing. Guess it’s time for the stillen gen 3 intake. I still need to change out my plugs and buy some new 02 sensors just in case.