Low Pressure Issue

npdabest · 03-05-2018, 10:08 AM

Hi, I posted about a low pressure issue I am having in another section.

370Z Low Oil Pressure

I was looking through some of the posts and saw some one has a pretty inexpensive list of parts they bought to fix it.

http://www.the370z.com/engine-drivet...alley-diy.html

Update: So I am going to get it looked at by a reputable shop around me. But I really don't want them using the same cheap parts if possible. I'd like to recommend them to use upgraded parts. Not sure if they will do this, but if anyone has any trustworthy shop they know of in the tri-state are then I might check them out.

PongSanity · 03-22-2018, 11:26 AM

EPS gallery gasket is the kit you should get. If replaced with OEM, they'll blow out again. I also recommend changing out the water pump and possible getting some work done to the oil pump, have it ported or billet gears or get the suckerpunch oil pump kit. It is labor intensive to get these gaskets done, might as well spend once, cry once...

jmroy6 · 03-23-2018, 11:44 AM

Quote:

Originally Posted by PongSanity

EPS gallery gasket is the kit you should get. If replaced with OEM, they'll blow out again. I also recommend changing out the water pump and possible getting some work done to the oil pump, have it ported or billet gears or get the suckerpunch oil pump kit. It is labor intensive to get these gaskets done, might as well spend once, cry once...

The revised OEM gasket are metal and will not blow out(post 2012), i would still change the fasteners tho.

PongSanity · 03-23-2018, 12:36 PM

Fasteners are the issue not the gasket material...

Sent from my SM-G950U using Tapatalk

03-05-2018, 10:08 AM	#1 (permalink)
npdabest Base Member Join Date: Jul 2010 Location: delaware Posts: 73 Drives: 09 MB 370z Rep Power: 15	Low Pressure Issue Hi, I posted about a low pressure issue I am having in another section. 370Z Low Oil Pressure I was looking through some of the posts and saw some one has a pretty inexpensive list of parts they bought to fix it. http://www.the370z.com/engine-drivet...alley-diy.html Update: So I am going to get it looked at by a reputable shop around me. But I really don't want them using the same cheap parts if possible. I'd like to recommend them to use upgraded parts. Not sure if they will do this, but if anyone has any trustworthy shop they know of in the tri-state are then I might check them out. Last edited by npdabest; 03-05-2018 at 05:54 PM.

03-22-2018, 11:26 AM	#2 (permalink)
PongSanity Enthusiast Member Join Date: Jul 2014 Location: Virgin Islands Posts: 261 Drives: '09 G37s KH3 6MT Rep Power: 11	EPS gallery gasket is the kit you should get. If replaced with OEM, they'll blow out again. I also recommend changing out the water pump and possible getting some work done to the oil pump, have it ported or billet gears or get the suckerpunch oil pump kit. It is labor intensive to get these gaskets done, might as well spend once, cry once... Rusty and Elmo370z like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Zero oil pressure	bimbimbop	Forced Induction	9	10-31-2017 11:36 PM
Key Fob Issue/Tire Pressure Light	Bidness91	Exterior & Interior	16	07-10-2017 12:30 PM
[WTB] Please Help! Warranty issue. Need OEM clutch, flywheel pressure plate etc.	Getsydwys	Parts for sale (Private Classifieds)	7	02-22-2016 01:18 AM
major issue with AEROJACKET.... anyone heard from them lately or had similar issue??	DRFTR	Nissan 370Z General Discussions	158	02-18-2016 01:28 PM
Brake Pressure Issue 2009 Z	fjpthree	Brakes & Suspension	15	01-22-2014 03:01 AM

03-23-2018, 12:36 PM	#4 (permalink)
PongSanity Enthusiast Member Join Date: Jul 2014 Location: Virgin Islands Posts: 261 Drives: '09 G37s KH3 6MT Rep Power: 11	Fasteners are the issue not the gasket material... Sent from my SM-G950U using Tapatalk