My car stalled while driving and would not start back

MSC43 · 02-08-2018, 12:14 PM

Luckily I was in my neighborhood and walked back home. I had it towed to the dealership. They said it was the crank shaft sensor. Would this make the car stall after it is running? Once it stalled it would not crank back up. The engine was turning over like it wanted to start.

I thought the engine may of seized because my oil is low when I checked it at the dealership. The car was making a sewing machine noise for about a minute after I first started it. Guessing that was due to the oil level being low. Apparently I need to check the oil more often than I do with this car.

They are replacing that and changing the oil. Hopefully that will fix it. BUT they mentioned they have to replace that and get it running to make sure nothing else is wrong.
This is 2nd time I had to be towed. First was the Clutch Slave Cylinder that went out while driving down the road. Ugh.

Wilson2608 · 02-08-2018, 01:01 PM

If the engine still turns over you didn’t seize it. A crankshaft sensor will cause the problems you described. I’m willing to bet that’s the problem if Nissan said it was. If your not confident you can always rent a scan tool and read the code.

MSC43 · 02-08-2018, 04:19 PM

Quote:

Originally Posted by Wilson2608

If the engine still turns over you didn’t seize it. A crankshaft sensor will cause the problems you described. I’m willing to bet that’s the problem if Nissan said it was. If your not confident you can always rent a scan tool and read the code.

Thanks. I do believe them. I just hope once they fix that,there is nothing else wrong. 😁

MSC43 · 02-09-2018, 07:25 PM

They got car running after replacing crankshaft position sensor.......But something else is wrong. I think he said intake solenoid? Or something along that line...Maybe he said the wrong term....Like $2k-3k is all I remember. 😅. He did say he is going to get it replaced under drivetrain warranty. Any idea what part of an intake would cost so damn much?

MSC43 · 02-14-2018, 04:28 PM

It was the Camshaft Intake Sprocket. Apparently lots of labor involved. Over $2k to replace they said. I got it covered under warranty though thankfully.

Krylon · 02-14-2018, 04:39 PM

Thanks for coming back and posting your resolution. Its great for everyones future reference.

old guy · 02-14-2018, 05:19 PM

Quote:

Originally Posted by MSC43

It was the Camshaft Intake Sprocket. Apparently lots of labor involved. Over $2k to replace they said. I got it covered under warranty though thankfully.

Did they say what caused it to go bad ???

MSC43 · 02-14-2018, 08:25 PM

Quote:

Originally Posted by old guy

Did they say what caused it to go bad ???

No. But I believe that was the ticking noise I was hearing when first starting the car. It went away after a few minutes. The car was low on oil which is 100% my fault for not checking it frequently enough. My guess is that had a lot to do with it. The day before it died while driving I noticed I was in 3rd gear at low RPM and it felt like the car jerked a little. Like it hesitated is the best explanation. I had them change the oil and they put some type of sedative in. My invoice says "BG Oil Kit". The car drives great now. Feels like it has more power.....buy that could be because I was in a Nissan Frontier for a week. Lol. 😁

MSC43 · 02-14-2018, 08:26 PM

Quote:

Originally Posted by Krylon

Thanks for coming back and posting your resolution. Its great for everyones future reference.

Thanks.... That is why I did. Incase someone else has similar issues.

Spooler · 02-14-2018, 08:34 PM

Quote:

Originally Posted by MSC43

No. But I believe that was the ticking noise I was hearing when first starting the car. It went away after a few minutes. The car was low on oil which is 100% my fault for not checking it frequently enough. My guess is that had a lot to do with it. The day before it died while driving I noticed I was in 3rd gear at low RPM and it felt like the car jerked a little. Like it hesitated is the best explanation. I had them change the oil and they put some type of sedative in. My invoice says "BG Oil Kit". The car drives great now. Feels like it has more power.....buy that could be because I was in a Nissan Frontier for a week. Lol. ��

That would be BG MOA. It is a great product.

02-08-2018, 12:14 PM	#1 (permalink)
MSC43 Base Member Join Date: Jul 2015 Location: Georgia Posts: 55 Drives: ....... Rep Power: 10	My car stalled while driving and would not start back Luckily I was in my neighborhood and walked back home. I had it towed to the dealership. They said it was the crank shaft sensor. Would this make the car stall after it is running? Once it stalled it would not crank back up. The engine was turning over like it wanted to start. I thought the engine may of seized because my oil is low when I checked it at the dealership. The car was making a sewing machine noise for about a minute after I first started it. Guessing that was due to the oil level being low. Apparently I need to check the oil more often than I do with this car. They are replacing that and changing the oil. Hopefully that will fix it. BUT they mentioned they have to replace that and get it running to make sure nothing else is wrong. This is 2nd time I had to be towed. First was the Clutch Slave Cylinder that went out while driving down the road. Ugh.

02-08-2018, 01:01 PM	#2 (permalink)
Wilson2608 Enthusiast Member Join Date: Dec 2014 Location: Nashville Posts: 301 Drives: Nissan 370Z Sport Rep Power: 11	If the engine still turns over you didn’t seize it. A crankshaft sensor will cause the problems you described. I’m willing to bet that’s the problem if Nissan said it was. If your not confident you can always rent a scan tool and read the code. __________________ Stillen G3, z1 Intake Manifold, Stillen Headers, Z1 HFC's, Stillen Catback. 330whp 267 ft- lbs tuned at Z1 motorsports.

02-14-2018, 04:39 PM	#6 (permalink)
Krylon Base Member Join Date: Nov 2015 Location: Virginia Posts: 153 Drives: 370Z Rep Power: 20	Thanks for coming back and posting your resolution. Its great for everyones future reference. MSC43 likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Car Died While Driving, Now Will Not Start. No Codes.	ShaunB828	Engine & Drivetrain	22	11-19-2017 06:21 AM
Need help, need a rim. Driving back to FL.	Cp9	North East Region	2	08-01-2017 11:35 AM
Need Help - Car Stalled and wont start	kholy	Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs	96	07-20-2015 10:35 PM
Driving BACK from Houston to Los Angeles tomorrow (yes already)	DEpointfive0	Nissan 370Z General Discussions	36	07-10-2013 03:19 AM
Driving with Ferrari's. How to start your morning.	Mt Tam I am	Nissan 370Z General Discussions	22	10-31-2011 11:26 AM

02-09-2018, 07:25 PM	#4 (permalink)
MSC43 Base Member Join Date: Jul 2015 Location: Georgia Posts: 55 Drives: ....... Rep Power: 10	They got car running after replacing crankshaft position sensor.......But something else is wrong. I think he said intake solenoid? Or something along that line...Maybe he said the wrong term....Like $2k-3k is all I remember. 😅. He did say he is going to get it replaced under drivetrain warranty. Any idea what part of an intake would cost so damn much?

02-14-2018, 04:28 PM	#5 (permalink)
MSC43 Base Member Join Date: Jul 2015 Location: Georgia Posts: 55 Drives: ....... Rep Power: 10	It was the Camshaft Intake Sprocket. Apparently lots of labor involved. Over $2k to replace they said. I got it covered under warranty though thankfully.