4.08 gears

Carbon

What are some honest opinions on these, do you actually feel a difference, is the top speed vs how much tq you gain worth it

jchammond

With you driving a 16' Nismo; You should already have the 3.92:1 rear axle ratio....
Not as big of a difference as a pre-15' w/3.69:1 gearing...just 1 gear ratio lower.
It would drop your 5th gear (1:1 ratio) by roughly just 6mph...vs 15/16mph for a Nismo going from 3.69:1---4.08:1.

__________________
MazWorx built long block | FI-TT-100 Stage 2.75 | IPT built 7A/T

http://www.the370z.com/members-370z-...s-musings.html

crazy4oldcars

Gears don't make torque, they make speed. The 4.08 gears would change your 0-60 time (acceleration) by 4% vs the Nismo 3.92 ratio. They will also increase your RPM at any given gear and speed combination by 4%. For me, that would mean about 125 RPM higher at 75 mph in top gear.

Sent from my XT1254 using Tapatalk

SouthArk370Z

Correct. But gears do multiply torque.

__________________
Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub
Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

jchammond

Gearing available-3.36,3.54,3.69,3.90(3.92),4.08 & 4.36:1...lower the gear (higher number) quicker the hole-shot & slower mph on top-end....+ more rpm's & could mean more gasoline burned.

__________________
MazWorx built long block | FI-TT-100 Stage 2.75 | IPT built 7A/T

http://www.the370z.com/members-370z-...s-musings.html

solidus

I went from 3.36 with a 12' 7AT G37 to the 3.69 rear from a 6MT 370z. The difference was immediate and well worth the pumpkin swap. I also did a carbon PST driveshaft with the swap but the gearing was a night and day difference. The only hickup was that I lost cruise control but I never used it anyway. And yes the FD gear on any car is a torque multiplier. Torque gives accelleration , hp gives you speed.

Optimiser

Yes you will feel the difference!

chuckie311

Honestly it's one of the best mods I have done.. the acceleration is night and day between them.. I wouldn't go back to stock gears

__________________
Tuned by (Seb@Specialty-Z)
2011 G37 Cam'd FBO 347whp 280wtq Corn Fed 4.08 Gears

PongSanity

enjoyed them while I had it in. Accel was great

Sent from my SM-G950U using Tapatalk

Quicksilvers

I myself would not install 4.08 gears unless you go to the track a lot or your 370z is more of a weekend warrior. I would not install 4.08 gears if you 370z is any kind of a daily driver. Your mpg will suffer with 4.08 gears. In your case I would keep the 3.92 gears that came stock in your 370z Nismo.

Felix 808

I see you have the manual, if you in fact have the 3.92 gears, I would not change a thing as 4% increase is not going to be worth it. If you are going to change gears (unless you are really fine tuning $$$$$) don't waste your time with anything less than a 10% change, you will not be happy. On the other side of that coin, you can go too far/ deep in your gearing. I would not go over 20% unless it's built for wheeling or the drag strip.

$.02 YMMV

__________________
Semper Fi

Μολὼν λαβέ

Hotrodz

I would suggest keeping your current setup and spend the money on real LSD! This will improve traction, responsiveness and handling!

Sent from my SM-N910P using Tapatalk

__________________
Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:|Fast Intentions 3" TT-TDX|SpecialtyZ/Fast Intentions 72 Row Oil Cooler|SZ 6 Puck Clutch & Flywheel|3GsCustoms|Z1|Wavetrac|Hotchkis|Whiteline |Blitz|Fortune Auto 500|Fujimura|SPL|H&R|TK|TWM|RPM Rollbar|Sparco|Next Level Performance|TrackSpec|AeroFlow Dynamics|Pioneer|

Felix 808

and you usually do this & gears together Also if you do do this, upgrade the bushings during the same.

__________________
Semper Fi

Μολὼν λαβέ

jchammond

With all that being said; Going w/4.36's is gonna be your most noticeable change.
Your 5th gear will be reduced from approx.153mph down to 138mph. (calculated w/oem diameter rubber@redline.) 15mph.

__________________
MazWorx built long block | FI-TT-100 Stage 2.75 | IPT built 7A/T

http://www.the370z.com/members-370z-...s-musings.html

jchammond

You could drop your tire series down from a 35 to a 30 (285/30/19) & that will give you the same gearing as 4.08's.
You would have to cut the front as well 40-35.
Cheaper than a gear-swap & potentially get you a set of track tires??

__________________
MazWorx built long block | FI-TT-100 Stage 2.75 | IPT built 7A/T

http://www.the370z.com/members-370z-...s-musings.html