What's a good clutch to purchase?

Dubro · 11-30-2016, 08:12 PM

2010 Nismo

Need to ask you guys....what's a good value for the money clutch. I don't track or race the car, just spirited driving. I will be changing the clutch master cylinder and installing a clutch slave cylinder elimination kit from Z1. (original clutch slave cylinder failed at 51000 miles)

NorthStyle · 11-30-2016, 09:04 PM

Unless you've already purchased the Z1 CSC delete and/or a replacement master cylinder, I'd go with a clutch/flywheel/CMAK kit from ZSpeed and a master cylinder from RJM.

Dubro · 12-01-2016, 04:35 AM

I already bought the kit from z1 except for the clutch so I still want to k now what's a good value for the money clutch. I don't track or race the car, just spirited driving.

newls196 · 12-01-2016, 04:54 AM

you are close to me, why not go walk into Z1 and purchase their 375$ street clutch kit and also think about purchasing the light weight flywheel. Everytime I walk into Z1 I of course walk out a little more broke, but i know 100% i just purchased a quality part and ill have no worries

Dubro · 12-02-2016, 06:38 AM

I bought it. Installed it. (and a new RJM clutch master cylinder) It grabs to close to the floor. I adjusted the CMC and the CSC and the 2 switches on the pedal and it still grabs to close to the floor (1/4" off floor) - (so close its easy to grind gears) Only idea I have is try a different clutch. Need to know which might be a good clutch to purchase.

1slow370 · 12-02-2016, 07:46 AM

change in throw is likely from different bore master and csc's clutch throw doesn't get changed unless the cluth is a different stck height and that will only happen really if you go twin plate. change the master or get an adjustale throw pedal

Jayhovah · 12-02-2016, 02:07 PM

Quote:

Originally Posted by Dubro

I bought it. Installed it. (and a new RJM clutch master cylinder) It grabs to close to the floor. I adjusted the CMC and the CSC and the 2 switches on the pedal and it still grabs to close to the floor (1/4" off floor) - (so close its easy to grind gears) Only idea I have is try a different clutch. Need to know which might be a good clutch to purchase.

I have the Z1 Clutch/Flywheel package and mine engaged very close to the floor as well, but it turned out to be a failing CMC (diagnosed in one email by RJM)... you should call RJM and ask if that is the expected behavior before assuming a new clutch will raise the engagement height. After replacing my CMC the engagement point is normal again...

I am running a stock CMC and ZSpeed HDCSC and stock pedal (though my RJM Pedal splurge on black friday is in the mail!)

Dubro · 12-03-2016, 09:23 PM

I noticed 1 drop of fluid leaking daily from CMS. RJM is sending a replacement. Hope that fixes it. Thanks for the replys.

Joe@ZSpeed · 12-13-2016, 03:27 PM

Quote:

Originally Posted by 1slow370

change in throw is likely from different bore master and csc's clutch throw doesn't get changed unless the cluth is a different stck height and that will only happen really if you go twin plate. change the master or get an adjustale throw pedal

Clutch itself can easily cause engagement point change. All else being the same, Simply by changing the clutch kit the engagement point can change greatly depending on how the clutch is built, How efficient the pressure plate is and how much marcel cushion is in the disk itself.

11-30-2016, 08:12 PM	#1 (permalink)
Dubro Base Member Join Date: Oct 2009 Location: Alpharetta, GA Posts: 62 Drives: 2010 Nismo Rep Power: 16	What's a good clutch to purchase? 2010 Nismo Need to ask you guys....what's a good value for the money clutch. I don't track or race the car, just spirited driving. I will be changing the clutch master cylinder and installing a clutch slave cylinder elimination kit from Z1. (original clutch slave cylinder failed at 51000 miles)

11-30-2016, 09:04 PM	#2 (permalink)
NorthStyle A True Z Fanatic Join Date: Aug 2015 Location: Deutschland + SC/FL USA Posts: 1,255 Drives: 2011 370Z Nismo Rep Power: 24277	Unless you've already purchased the Z1 CSC delete and/or a replacement master cylinder, I'd go with a clutch/flywheel/CMAK kit from ZSpeed and a master cylinder from RJM. lj909 likes this.

12-01-2016, 04:54 AM	#4 (permalink)
newls196 Base Member Join Date: Feb 2016 Location: Georgia Posts: 115 Drives: 2012 370z Rep Power: 9	you are close to me, why not go walk into Z1 and purchase their 375$ street clutch kit and also think about purchasing the light weight flywheel. Everytime I walk into Z1 I of course walk out a little more broke, but i know 100% i just purchased a quality part and ill have no worries __________________ 2012 370z 6MT "Sport Package" Z1 CSC, Z1 Test Pipes, ARK Catback, Injen CAI, SpeedBooster, Custom PCV Canister setup, Z1 dyno tune coming soon

12-02-2016, 07:46 AM	#6 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7251	change in throw is likely from different bore master and csc's clutch throw doesn't get changed unless the cluth is a different stck height and that will only happen really if you go twin plate. change the master or get an adjustale throw pedal __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Can we get a good clutch thread going?	astro932	Engine & Drivetrain	10	03-16-2016 09:11 PM
Clutch Helper Spring Purchase... Where?	VAUROS	Engine & Drivetrain	15	03-20-2014 06:41 PM
Good deal on 40th? - about to purchase	mspaun3	Nissan 370Z Pricing / Ordering Discussions	0	08-18-2011 02:01 PM
JWT clutch is just too damn good... unfortunately...	KillerBee370	Engine & Drivetrain	129	07-26-2011 10:47 PM
need some good website for purchase~~~help~~	niznizbobo	Nissan 370Z General Discussions	1	09-19-2009 10:12 PM

12-01-2016, 04:35 AM	#3 (permalink)
Dubro Base Member Join Date: Oct 2009 Location: Alpharetta, GA Posts: 62 Drives: 2010 Nismo Rep Power: 16	I already bought the kit from z1 except for the clutch so I still want to k now what's a good value for the money clutch. I don't track or race the car, just spirited driving.

12-02-2016, 06:38 AM	#5 (permalink)
Dubro Base Member Join Date: Oct 2009 Location: Alpharetta, GA Posts: 62 Drives: 2010 Nismo Rep Power: 16	I bought it. Installed it. (and a new RJM clutch master cylinder) It grabs to close to the floor. I adjusted the CMC and the CSC and the 2 switches on the pedal and it still grabs to close to the floor (1/4" off floor) - (so close its easy to grind gears) Only idea I have is try a different clutch. Need to know which might be a good clutch to purchase.

12-03-2016, 09:23 PM	#8 (permalink)
Dubro Base Member Join Date: Oct 2009 Location: Alpharetta, GA Posts: 62 Drives: 2010 Nismo Rep Power: 16	I noticed 1 drop of fluid leaking daily from CMS. RJM is sending a replacement. Hope that fixes it. Thanks for the replys.