Engine Parts Just Wondering

jwomack1547 · 04-10-2016, 12:44 PM

So I finally managed to swap the engine in my Z and didn't have to return the core. Now it's just laying around. What are some good parts that may be sellable/usable from the old engine? It had a spun rod bearing so doing the whole block wouldn't be an option.

edub370 · 04-11-2016, 08:15 AM

head should be wortha pretty penny. and unnaffected by a spun rod...

unless they only replaced the short block, in that case, the block itself may be worth a bit.

jwomack1547 · 04-12-2016, 01:54 AM

Gotcha, I'll probably get those off. But as for the short block, I don't know how bad it is until I look at it. I caught it pretty early when it initially started the knock but who knows.

edub370 · 04-12-2016, 08:20 AM

should just be bearing and possibly crank damage

Duc_Z09 · 04-12-2016, 10:29 AM

Quote:

Originally Posted by edub370

should just be bearing and possibly crank damage

+1. The block should be fine and I'd bet there's a good chance the crank is too. Even if it isn't the journals can be machined down .020 or so and compensated with thicker main/rod bearings. My Jeep had bad scouring on the crank and we still saved it.

Ghostvette · 04-12-2016, 12:41 PM

Quote:

Originally Posted by jwomack1547

So I finally managed to swap the engine in my Z and didn't have to return the core. Now it's just laying around. What are some good parts that may be sellable/usable from the old engine? It had a spun rod bearing so doing the whole block wouldn't be an option.

Quote:

Originally Posted by edub370

head should be wortha pretty penny. and unnaffected by a spun rod...

unless they only replaced the short block, in that case, the block itself may be worth a bit.

Quote:

Originally Posted by Duc_Z09

+1. The block should be fine and I'd bet there's a good chance the crank is too. Even if it isn't the journals can be machined down .020 or so and compensated with thicker main/rod bearings. My Jeep had bad scouring on the crank and we still saved it.

Post it up on the for sale board and see what happens. I'm sure there are people looking for a complete engine to rebuild for a monster HP build. Spun rod bearings are fairly easy to resolve, since most reputable engine builders go through the block and rotating assemblies to make sure there are no problems.

Other option: rebuild it for your own monster HP build...

jwomack1547 · 04-12-2016, 03:02 PM

I might think about rebuilding it but 69k miles from my sport originally, but I scraped up my new one with 40k miles from a wrecked nismo. I'll post it and see what happens. Better parting or whole?

Sent from my SM-N900T using Tapatalk

Ghostvette · 04-12-2016, 03:23 PM

Quote:

Originally Posted by jwomack1547

I might think about rebuilding it but 69k miles from my sport originally, but I scraped up my new one with 40k miles from a wrecked nismo. I'll post it and see what happens. Better parting or whole?

Sent from my SM-N900T using Tapatalk

I would post it as a whole first, that would save you the headache of disassembly, keeping up with the proper bolts, etc. IIRC, shipping on engines is about $500, at least that is what my son paid in shipping for a JDM engine for his 93 300zx.

04-10-2016, 12:44 PM	#1 (permalink)
jwomack1547 Base Member Join Date: Jul 2014 Location: Georgia Posts: 60 Drives: 09 370z VB M6 Rep Power: 11	Engine Parts Just Wondering So I finally managed to swap the engine in my Z and didn't have to return the core. Now it's just laying around. What are some good parts that may be sellable/usable from the old engine? It had a spun rod bearing so doing the whole block wouldn't be an option.

04-11-2016, 08:15 AM	#2 (permalink)
edub370 A True Z Fanatic Join Date: May 2011 Location: KCMO Posts: 3,458 Drives: 09 370z S/T 6MT Rep Power: 20	head should be wortha pretty penny. and unnaffected by a spun rod... unless they only replaced the short block, in that case, the block itself may be worth a bit. __________________ 09 370Z ST 6MT//Injen CAI//Greddy CBE//TP//TSW's//Swifts//Stillen lip//Whiteline sways 326whp/268tq

04-12-2016, 08:20 AM	#4 (permalink)
edub370 A True Z Fanatic Join Date: May 2011 Location: KCMO Posts: 3,458 Drives: 09 370z S/T 6MT Rep Power: 20	should just be bearing and possibly crank damage __________________ 09 370Z ST 6MT//Injen CAI//Greddy CBE//TP//TSW's//Swifts//Stillen lip//Whiteline sways 326whp/268tq

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[WTB] Top secret engine bay parts	EastcoastZ	Parts for sale (Private Classifieds)	49	09-03-2015 10:49 PM
[WTB] engine parts	Z eliminator	Parts for sale (Private Classifieds)	2	06-30-2014 06:14 PM
WTB: Stock engine parts	nexus4400	Parts for sale (Private Classifieds)	1	09-29-2010 02:34 PM
Anyone need all the Plastic Parts in Engine Bay?	motoextreme	Parts for sale (Private Classifieds)	5	12-24-2009 01:01 AM
Some New Engine Parts	370Ztune	Engine & Drivetrain	12	02-21-2009 02:44 PM

04-12-2016, 01:54 AM	#3 (permalink)
jwomack1547 Base Member Join Date: Jul 2014 Location: Georgia Posts: 60 Drives: 09 370z VB M6 Rep Power: 11	Gotcha, I'll probably get those off. But as for the short block, I don't know how bad it is until I look at it. I caught it pretty early when it initially started the knock but who knows.

04-12-2016, 03:02 PM	#7 (permalink)
jwomack1547 Base Member Join Date: Jul 2014 Location: Georgia Posts: 60 Drives: 09 370z VB M6 Rep Power: 11	I might think about rebuilding it but 69k miles from my sport originally, but I scraped up my new one with 40k miles from a wrecked nismo. I'll post it and see what happens. Better parting or whole? Sent from my SM-N900T using Tapatalk