zspeed HD CSC

mishuko · 03-13-2016, 05:34 PM

hi guys,

long story short, installed the HD CSC, replaced MSC, got the SS hoseline but apparently the bleed valve won't shut properly and it leaks. shop sent me a vid but it's very low quality... it like drips out slowly.

any idea why? or has anyone else run into this problem? any way to fix?

p.s. I've contacted Joe as well but don't expect to hear back until Monday.

40 to 332 · 03-13-2016, 06:10 PM

Yep, another member reported the same problem with the bleed valve a few months ago. IIRC the member spoke with Joe at Z Speed and was sent a new bleed screw which solved the problem (... or they may have simply purchased a new bleed screw from a local auto parts store). Probably best that you talk with Joe and get his advice. Keep the rest of us posted on what you find out. I have a spare HD CSC and I'd like to know if it could suffer from the same problem. Perhaps a bad batch of bleeder valves was produced.

mishuko · 03-13-2016, 07:11 PM

Quote:

Originally Posted by 40 to 332

Yep, another member reported the same problem with the bleed valve a few months ago. IIRC the member spoke with Joe at Z Speed and was sent a new bleed screw which solved the problem (... or they may have simply purchased a new bleed screw from a local auto parts store). Probably best that you talk with Joe and get his advice. Keep the rest of us posted on what you find out. I have a spare HD CSC and I'd like to know if it could suffer from the same problem. Perhaps a bad batch of bleeder valves was produced.

do you remember the thread? and yea if it's as simple as a new bleeder screw then I'd be happy to just pick one up myself with the proper specs etc.

just bummed cause now I need to get another bottle of rbf 600... should of got 10 like other members mentioned last time

40 to 332 · 03-13-2016, 08:22 PM

Quote:

Originally Posted by mishuko

do you remember the thread? and yea if it's as simple as a new bleeder screw then I'd be happy to just pick one up myself with the proper specs etc.

just bummed cause now I need to get another bottle of rbf 600... should of got 10 like other members mentioned last time

Yeah, gsg740 reported a similar problem on 08-17-2015. Sorry, I'm not sure how to link back to that thread. I'll have to figure out how. Hopefully, this helps for now.

mishuko · 03-14-2016, 08:31 AM

This is for Joe! Thanks for clarifying!

xdragus · 03-15-2016, 08:10 PM

oh damn faulty bleed valves? hope I don't have the same problem.

Still no delivery date on my car yet so the hd csc is just chilling in it's box.

Hope your car is up and running soon.

Btw which shop is doing the install for you?

mishuko · 03-16-2016, 11:17 AM

Quote:

Originally Posted by xdragus

oh damn faulty bleed valves? hope I don't have the same problem.

Still no delivery date on my car yet so the hd csc is just chilling in it's box.

Hope your car is up and running soon.

Btw which shop is doing the install for you?

car's still at the shop waiting for the new bleeder screw.

HOPING it's the screw is the issue and not the valve itself cause the screw is the easy fix

shout out to Joe and Whitehead for being quick to respond.

SCOOBY JOE · 03-16-2016, 10:22 PM

Quote:

Originally Posted by 40 to 332

Yep, another member reported the same problem with the bleed valve a few months ago. IIRC the member spoke with Joe at Z Speed and was sent a new bleed screw which solved the problem (... or they may have simply purchased a new bleed screw from a local auto parts store). Probably best that you talk with Joe and get his advice. Keep the rest of us posted on what you find out. I have a spare HD CSC and I'd like to know if it could suffer from the same problem. Perhaps a bad batch of bleeder valves was produced.

Imma give him a call tomorrow, I was wondering why my fluid kept
Dropping.

03-13-2016, 05:34 PM	#1 (permalink)
mishuko A True Z Fanatic Join Date: Jul 2014 Location: bouncin on tigga Posts: 8,062 Drives: '12 Z Rep Power: 9435	zspeed HD CSC hi guys, long story short, installed the HD CSC, replaced MSC, got the SS hoseline but apparently the bleed valve won't shut properly and it leaks. shop sent me a vid but it's very low quality... it like drips out slowly. any idea why? or has anyone else run into this problem? any way to fix? p.s. I've contacted Joe as well but don't expect to hear back until Monday.

03-13-2016, 06:10 PM	#2 (permalink)
40 to 332 Enthusiast Member Join Date: Apr 2013 Location: Kimberley, BC, CANADA Posts: 452 Drives: 13 370Z BS M6 Sport Rep Power: 440	Yep, another member reported the same problem with the bleed valve a few months ago. IIRC the member spoke with Joe at Z Speed and was sent a new bleed screw which solved the problem (... or they may have simply purchased a new bleed screw from a local auto parts store). Probably best that you talk with Joe and get his advice. Keep the rest of us posted on what you find out. I have a spare HD CSC and I'd like to know if it could suffer from the same problem. Perhaps a bad batch of bleeder valves was produced. osbornsm likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CSC's... z1 and zspeed	batboyvaj	Engine & Drivetrain	7	05-27-2014 09:56 PM
[FOR SALE] FS - G37 ZSpeed Undershroud	jwick	Parts for sale (Private Classifieds)	15	03-26-2014 07:53 AM
[WTB] Zspeed Under tray	jgibbons	Parts for sale (Private Classifieds)	0	11-08-2013 02:22 PM
ZSpeed CSC	Vinny	Forced Induction	19	09-12-2012 10:10 PM
NEW!!! CQC from ZSpeed	DOOMMONKEY777	Engine & Drivetrain	0	12-13-2010 08:52 PM

03-15-2016, 08:10 PM	#6 (permalink)
xdragus Base Member Join Date: Aug 2015 Location: toronto Posts: 47 Drives: '17 PW Nismo Rep Power: 10	oh damn faulty bleed valves? hope I don't have the same problem. Still no delivery date on my car yet so the hd csc is just chilling in it's box. Hope your car is up and running soon. Btw which shop is doing the install for you?