engine upgrades

turbooo · 03-01-2016, 01:08 AM

Hi all,

My car engine is broken and I need to rebuild the engine...the cost at the agency dealer is US $ 6010 ....so I thought with this amount I could build a better engine with more HP and heavy duty.
My objective is to get the maximum HP from the engine without installing neither a Turbo nor a supercharger.

Am open for any suggestions. ...and thank you in advance for all of your support and guidance. ..
BTW. ..what is the maximum HP can I gain by upgrading the engine without any supercharger or turbo?
Also I would appreciate any recommendations on other upgrades on the drive train.

Waiting for reply

chuckie311 · 03-01-2016, 01:31 AM

6000 won't get you much of anything...
If you want the most power NA you need a stroker kit and cams would be a start..
But right there is 6k without any labor
You Can add header and test pipes or HFC..long tube headers
Ideally you would need double and more the amount to build the engine

turbooo · 03-01-2016, 02:36 AM

Quote:

Originally Posted by chuckie311

6000 won't get you much of anything...
If you want the most power NA you need a stroker kit and cams would be a start..
But right there is 6k without any labor
You Can add header and test pipes or HFC..long tube headers
Ideally you would need double and more the amount to build the engine

Thank you for your prompt reply. ...then you advice is to do the rebuilt on dealer workshop and to drop the idea of upgrade with this budget?

What about the stage 1 long block package that Kyle is offering from import part pro for about US $ 7000?

turbooo · 03-01-2016, 02:38 AM

Anyone here experienced the stage 1 long block package that Kyle is offering from import part pro for about US $ 7000?
Any idea how good it is and what would the HP gained?
Is it worth it?

BGTV8 · 03-01-2016, 05:22 AM

Kyle's offering is low-compression (~9.5:1) on the basis it will be boosted ... is not for NA.

You could try hi-comp pistons from JWT but you would need to run "good" fuel all the time as it will be 12:1 (OEM is 11:1). I am talking about 100-octane (RON) as a bare minimum - not sure what this is in US terms as you guys use MON numbers for your fuel. You will also need a solid tune

I am thinking your budget is about 50% of what you actually will end up spending ...

G37Some · 03-01-2016, 07:49 PM

rebuilt motor bored, decked, hot tank etc & rebuilt with forged pistons & rods, head studs/bolts & gaskets cost me roughly $9k as an FYI just to keep things in perspective. this was roughly 6 months ago. Heads weren't touched at all.

turbooo · 03-02-2016, 01:25 AM

Quote:

Originally Posted by G37Some

rebuilt motor bored, decked, hot tank etc & rebuilt with forged pistons & rods, head studs/bolts & gaskets cost me roughly $9k as an FYI just to keep things in perspective. this was roughly 6 months ago. Heads weren't touched at all.

Thank you for sharing the information

tonythetiger · 03-02-2016, 08:41 PM

i wished there was a diy engine build...

Rid3_FaM0uS · 03-10-2016, 02:03 PM

Damn I need to start building engines for this community. I didn't realize how much inflation machine shops charge to disassemble/assemble a short block!

Elmo370z · 03-10-2016, 02:18 PM

Very small market for our platforms

Rid3_FaM0uS · 03-12-2016, 06:26 PM

There are more and more factory internals boosted Z's every day man. This market will only continue to be on the climb as engines wear out.

Presto · 03-12-2016, 11:26 PM

Since your in uae you need to find a garage that can rebuild your engine for a lot cheaper than $6k usd. The stealership will rip people off that's common knowledge. Probably there is no need of a rebuild knowing the uae dealer they just suggested that to make some more money. I highly recommend a second opinion from another garage.

Elmo370z · 03-12-2016, 11:54 PM

Thete is done kid selling a long block for 1000 on here

03-01-2016, 01:08 AM	#1 (permalink)
turbooo Base Member Join Date: Jun 2014 Location: uae Posts: 27 Drives: 12 nissan z370 wh A7 Rep Power: 11	engine upgrades Hi all, My car engine is broken and I need to rebuild the engine...the cost at the agency dealer is US $ 6010 ....so I thought with this amount I could build a better engine with more HP and heavy duty. My objective is to get the maximum HP from the engine without installing neither a Turbo nor a supercharger. Am open for any suggestions. ...and thank you in advance for all of your support and guidance. .. BTW. ..what is the maximum HP can I gain by upgrading the engine without any supercharger or turbo? Also I would appreciate any recommendations on other upgrades on the drive train. Waiting for reply

03-01-2016, 01:31 AM	#2 (permalink)
chuckie311 Enthusiast Member Join Date: Jul 2012 Location: las vegas Posts: 313 Drives: Q50/G37 Rep Power: 13	6000 won't get you much of anything... If you want the most power NA you need a stroker kit and cams would be a start.. But right there is 6k without any labor You Can add header and test pipes or HFC..long tube headers Ideally you would need double and more the amount to build the engine __________________ Tuned by (Seb@Specialty-Z) 2011 G37 Cam'd FBO 347whp 280wtq Corn Fed 4.08 Gears

03-01-2016, 05:22 AM	#5 (permalink)
BGTV8 A True Z Fanatic Join Date: Dec 2009 Location: 03350 Australia Posts: 1,514 Drives: 09 Nissan 370Z M6 Rep Power: 39973	Kyle's offering is low-compression (~9.5:1) on the basis it will be boosted ... is not for NA. You could try hi-comp pistons from JWT but you would need to run "good" fuel all the time as it will be 12:1 (OEM is 11:1). I am talking about 100-octane (RON) as a bare minimum - not sure what this is in US terms as you guys use MON numbers for your fuel. You will also need a solid tune I am thinking your budget is about 50% of what you actually will end up spending ... GaleForce, Chuck33079 and Elmo370z like this. Last edited by BGTV8; 03-01-2016 at 05:24 AM.

03-01-2016, 07:49 PM	#6 (permalink)
G37Some Base Member Join Date: Apr 2014 Location: Tampa, FL Posts: 144 Drives: 2008 G37s Rep Power: 11	rebuilt motor bored, decked, hot tank etc & rebuilt with forged pistons & rods, head studs/bolts & gaskets cost me roughly $9k as an FYI just to keep things in perspective. this was roughly 6 months ago. Heads weren't touched at all. __________________ instagram : @TurboG37

03-02-2016, 08:41 PM	#8 (permalink)
tonythetiger A True Z Fanatic Join Date: Oct 2010 Location: SA, TX Posts: 1,035 Drives: 10 Nissan 370z PG MT Rep Power: 193	i wished there was a diy engine build... __________________ KWV3/Eibach/StillenG3/FI CBE+LTH+34Row/Uprev/SPL/SouthBendSS/QuaifeLSD/4.08/TommyKaira/Status/VolkZE40/AP Radical BBK/Seibon/Amuse/VIS/Sparco/WorksBellGTC/RJM/Nismo

03-01-2016, 02:38 AM	#4 (permalink)
turbooo Base Member Join Date: Jun 2014 Location: uae Posts: 27 Drives: 12 nissan z370 wh A7 Rep Power: 11	Anyone here experienced the stage 1 long block package that Kyle is offering from import part pro for about US $ 7000? Any idea how good it is and what would the HP gained? Is it worth it?

03-10-2016, 02:03 PM	#9 (permalink)
Rid3_FaM0uS Track Member Join Date: Apr 2012 Location: Wapakoneta, Ohio Posts: 506 Drives: 2011 BS Nismo 370z Rep Power: 44	Damn I need to start building engines for this community. I didn't realize how much inflation machine shops charge to disassemble/assemble a short block! __________________ Always under construction. . .

03-10-2016, 02:18 PM	#10 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,709 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	Very small market for our platforms

03-12-2016, 06:26 PM	#11 (permalink)
Rid3_FaM0uS Track Member Join Date: Apr 2012 Location: Wapakoneta, Ohio Posts: 506 Drives: 2011 BS Nismo 370z Rep Power: 44	There are more and more factory internals boosted Z's every day man. This market will only continue to be on the climb as engines wear out. __________________ Always under construction. . .

03-12-2016, 11:26 PM	#12 (permalink)
Presto Base Member Join Date: May 2010 Location: Home Posts: 123 Drives: Car Rep Power: 15	Since your in uae you need to find a garage that can rebuild your engine for a lot cheaper than $6k usd. The stealership will rip people off that's common knowledge. Probably there is no need of a rebuild knowing the uae dealer they just suggested that to make some more money. I highly recommend a second opinion from another garage.

03-12-2016, 11:54 PM	#13 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,709 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	Thete is done kid selling a long block for 1000 on here

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Manual Upgrades vs. Auto Upgrades	occarclub	Nissan 370Z General Discussions	30	09-24-2014 01:38 PM
Upgrades	YangCheolIn	Brakes & Suspension	8	09-05-2012 12:04 AM
My Z after a few upgrades....	mbenetto	Member's 370Z Gallery	27	12-10-2011 02:05 AM
Upgrades	weezal657	Intake/Exhaust	11	07-12-2011 08:36 PM
Pic request: 370z engine bay w/stillen g3's and Seibon engine cover.	atx370z	Nissan 370Z Photos / Spyshots / Video / Media Gallery	20	01-05-2011 01:50 PM