HELP! - Improper O2 Sensor Installation from Dealership

IAmTheStig · 04-21-2015, 06:33 PM

Last fall my vehicle was diagnosed with the wrong part number O2 sensor installed in the driver's side upstream position. The replacement with the correct part number was covered under warranty by the dealership.

After inspecting the work at my house on a ramp, I noticed that the dealership connected the O2 sensor to the engine wire harness, and then screwed the sensor into the exhaust, causing the wire to wrap around the hot part of the sensor.

I tried to trace the wire back to the harness to untwist it from underneath, but could not gain access to the connector. Would it be accessible if I took the driver side airbox and intake off the vehicle?

What would be the best way to untwist this wire and keep it from melting on the O2 sensor itself?

Thanks for the advice in advance!

- Nate

Rusty · 04-21-2015, 07:43 PM

Think the best way is from under the car. Not much room up top. To unwrap the wire. You will have to unplug the sensor and unwrap it. OR take back to the dealer and biitch.

gomer_110 · 04-21-2015, 09:43 PM

The connector is a b!tch to get to. I think Nissan thought only people with baby size hands would ever need to mess with these connectors. Personnally I'd try taking it to the dealer that did it and make them fix it for free before I'd tackle it myself.

IAmTheStig · 04-21-2015, 10:16 PM

Ugh... Not the answer I was hoping for unfortunately. Thanks for the quick replies!

birdman71 · 04-21-2015, 11:16 PM

Quote:

Originally Posted by Rusty

OR take back to the dealer and biitch.

All that needs to be said....

04-21-2015, 06:33 PM	#1 (permalink)
IAmTheStig Base Member Join Date: Feb 2014 Location: Michigan Posts: 50 Drives: 2014 370z Coupe Rep Power: 11	HELP! - Improper O2 Sensor Installation from Dealership Last fall my vehicle was diagnosed with the wrong part number O2 sensor installed in the driver's side upstream position. The replacement with the correct part number was covered under warranty by the dealership. After inspecting the work at my house on a ramp, I noticed that the dealership connected the O2 sensor to the engine wire harness, and then screwed the sensor into the exhaust, causing the wire to wrap around the hot part of the sensor. I tried to trace the wire back to the harness to untwist it from underneath, but could not gain access to the connector. Would it be accessible if I took the driver side airbox and intake off the vehicle? What would be the best way to untwist this wire and keep it from melting on the O2 sensor itself? Thanks for the advice in advance! - Nate

04-21-2015, 07:43 PM	#2 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,180 Drives: 2011 Nismo GM 6M Rep Power: 2684437	Think the best way is from under the car. Not much room up top. To unwrap the wire. You will have to unplug the sensor and unwrap it. OR take back to the dealer and biitch. birdman71 likes this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

04-21-2015, 09:43 PM	#3 (permalink)
gomer_110 A True Z Fanatic Join Date: Aug 2011 Location: Perrysburg, OH Posts: 17,992 Drives: '11 Nismo #528 GM Rep Power: 36941	The connector is a b!tch to get to. I think Nissan thought only people with baby size hands would ever need to mess with these connectors. Personnally I'd try taking it to the dealer that did it and make them fix it for free before I'd tackle it myself. __________________ '11 370Z Nismo #528 Fast Intentions \| Stillen \| Motordyne \| Uprev \| CSF \| Zspeed \| Z1 Motorsports \| AST \| Swift \| SPC \| SPL \| Whiteline \| Hotchkis \| Bride \| Schroth \| Robispec \| Cusco \| Nismo \| Volk \| Forgestar \| Hoosier \| RJM '17 Titan Bone Stock

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
P2A00 - A/F Sensor Circuit Range/Performance (bank 1 sensor 1)	jwick	Forced Induction	60	06-11-2015 04:22 PM
[WTB] 09 nismo 370z o2 sensor (bank 1 sensor 1)	lt_370z	Parts for sale (Private Classifieds)	1	04-07-2015 03:43 PM
Viper Security System/Tilt sensor/Proximity sensor	kfull	Nissan 370Z General Discussions	4	04-27-2012 01:10 AM
Tsb: All nissan models; ecu damage can result from improper battery connection	AK370Z	370Z Technical Service Bulletins (TSB) / Recalls	0	02-08-2010 11:02 PM
Amp Installation - Can I relocate factory sensor?	cab83_750	Audio & Video	4	09-14-2009 07:35 PM

04-21-2015, 10:16 PM	#4 (permalink)
IAmTheStig Base Member Join Date: Feb 2014 Location: Michigan Posts: 50 Drives: 2014 370z Coupe Rep Power: 11	Ugh... Not the answer I was hoping for unfortunately. Thanks for the quick replies!