Suggestions for Built Blocks?

V8Killer · 02-22-2015, 08:08 PM

Hey guys!

I've had a long messed up road if anybody is following. My car is still at Z1 at the moment where they are getting ready to put another motor in. Now I am trying to decide about building the block. I've already contacted IPP and they suggested their stage one with a 10.0:1-10.5:1 compression. Z1 is still putting a list together on what they can offer. I have already emailed Jtran and F.I. Anybody have any other suggestions on who to ask? Now that I am looking to build the block I will go ahead and send my manifold in to make it direct port. Not sure how much of a shot I will do though after the built motor as IPP said I should be able to do a 250 shot with a proper tune no problem.

Boosted Performance · 02-22-2015, 08:47 PM

Call the guys at Dynosty. They just finished a complete VHR engine build for a Greddy turbo kit. The car put down 820RWHP 733TQ on E85...they have a very good in-house engine builder. One of my customers had them build a complete long block, the customer ended up making 934whp and 788ft/tq.

V8Killer · 02-22-2015, 09:42 PM

Quote:

Originally Posted by Boosted Performance

Call the guys at Dynosty. They just finished a complete VHR engine build for a Greddy turbo kit. The car put down 820RWHP 733TQ on E85...they have a very good in-house engine builder. One of my customers had them build a complete long block, the customer ended up making 934whp and 788ft/tq.

Jesus I don't know if I want to put down that much power LOL. Thanks though I sent them an email.

Boosted Performance · 02-22-2015, 09:59 PM

Quote:

Originally Posted by V8Killer

Jesus I don't know if I want to put down that much power LOL. Thanks though I sent them an email.

Yes it is a lot of power, it just shows that they are more than capable of building an engine that can handle a lot of power.

I am hoping somebody builds their engine at Dynosty, so I can offer them a deal on the BP turbo kit with the all new Precision 6870 turbo. I am confident that it would put down similar numbers.

V8Killer · 02-23-2015, 08:44 PM

Hopefully someone will by you kit. I'll just stick with the nitrous for now.

1LIFE · 02-23-2015, 10:25 PM

Quote:

Originally Posted by Boosted Performance

Yes it is a lot of power, it just shows that they are more than capable of building an engine that can handle a lot of power.

I am hoping somebody builds their engine at Dynosty, so I can offer them a deal on the BP turbo kit with the all new Precision 6870 turbo. I am confident that it would put down similar numbers.

Whoever takes you up on this offer BP will come out with 1k+whp

. Im pretty certain of that also

Neo187H · 02-23-2015, 10:35 PM

Quote:

Originally Posted by Boosted Performance

Call the guys at Dynosty. They just finished a complete VHR engine build for a Greddy turbo kit. The car put down 820RWHP 733TQ on E85...they have a very good in-house engine builder. One of my customers had them build a complete long block, the customer ended up making 934whp and 788ft/tq.

What compression ratios did they run on those two blocks?

1LIFE · 02-23-2015, 10:39 PM

Quote:

Originally Posted by Neo187H

What compression ratios did they run on those two blocks?

10:1 on the VHR
not sure with the DE

02-22-2015, 08:08 PM	#1 (permalink)
V8Killer A True Z Fanatic Join Date: Feb 2011 Location: Newport, NC Posts: 1,127 Drives: It Hard Till It Pops Rep Power: 16	Suggestions for Built Blocks? Hey guys! I've had a long messed up road if anybody is following. My car is still at Z1 at the moment where they are getting ready to put another motor in. Now I am trying to decide about building the block. I've already contacted IPP and they suggested their stage one with a 10.0:1-10.5:1 compression. Z1 is still putting a list together on what they can offer. I have already emailed Jtran and F.I. Anybody have any other suggestions on who to ask? Now that I am looking to build the block I will go ahead and send my manifold in to make it direct port. Not sure how much of a shot I will do though after the built motor as IPP said I should be able to do a 250 shot with a proper tune no problem. __________________ "Punch" Too much to list and a baby shot of nitrous....

02-22-2015, 08:47 PM	#2 (permalink)
Boosted Performance The370Z.com Sponsor Join Date: Feb 2010 Location: Edmonton, AB Posts: 1,629 Drives: Z's Rep Power: 3382	Call the guys at Dynosty. They just finished a complete VHR engine build for a Greddy turbo kit. The car put down 820RWHP 733TQ on E85...they have a very good in-house engine builder. One of my customers had them build a complete long block, the customer ended up making 934whp and 788ft/tq. 1LIFE likes this. __________________ 750WHP starting @ $7,500 to the door FOR DETAILS VISIT: http://www.the370z.com/members/boosted-performance.html FB: https://www.facebook.com/Boosted-Per...6303179791462/ IG @boostedperformanceyeg Last edited by Boosted Performance; 02-22-2015 at 08:50 PM.

02-23-2015, 08:44 PM	#5 (permalink)
V8Killer A True Z Fanatic Join Date: Feb 2011 Location: Newport, NC Posts: 1,127 Drives: It Hard Till It Pops Rep Power: 16	Hopefully someone will by you kit. I'll just stick with the nitrous for now. __________________ "Punch" Too much to list and a baby shot of nitrous....

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Real Auto Dynamics built and R/T tuned built motor TT	Mr.Squeeze	Forced Induction	132	04-18-2014 07:09 PM
Rays GONE - Found my Z on cider blocks.	area3z	Nissan 370Z General Discussions	51	01-19-2012 12:51 PM
My 370Z Left On Blocks!	CrownR426	North East Region	93	08-31-2011 09:49 PM
Ken Blocks Gymkhana Four: The Megamercial	vividracing	The Lounge (Off Topic)	4	08-24-2011 08:03 PM
Who makes built long blocks for the 370?	nightfire	Engine & Drivetrain	20	07-19-2009 12:17 PM