Start Up Issue (VIDEO)

amusez34 · 01-31-2015, 02:13 PM

Hi I have been having this problem for a while but it has been happening more often this couple days. I dont know how to say it but when I start it it will go dead if I do not rev it up. I dont know if its the battery problem or starter.

Video:

Spooler · 01-31-2015, 08:51 PM

Symptoms of the idle air control valve being clogged up with junk. I would clean both throttle bodies.

DavidZ370 · 01-31-2015, 08:53 PM

DUDE! I have the same damn problem but its a little better it doesn't turn off, what a trip man.

zeexu · 01-31-2015, 11:47 PM

Had this exact problem months ago. First it was just few times a month but it became worse and worse as time goes. cleaned throttle bodies and havent encounter the problem ever since

Pintsize725 · 02-01-2015, 12:14 AM

Might be some other ideas here:

Engine starts then dies

I started with cleaning MAF sensors and TBs. I ended up getting long tube headers installed and haven't had an issue (yet) since remapping with UpRev.

DavidZ370 · 02-01-2015, 12:36 AM

Thank you guys I will also give this a shot

Spooler · 02-01-2015, 01:15 AM

If you clean the throttle bodies you will most likely need to reset the ECM. In the older cars with drive by wire it was to turn the key on and off 3 times and leaving it on, Then depress the gas pedal to the floor 3 times very smoothly. Not sure on the Z. I would think it would be the same.

01-31-2015, 02:13 PM	#1 (permalink)
amusez34 Track Member Join Date: Nov 2011 Location: SoCal Posts: 902 Drives: 370z Rep Power: 29	Start Up Issue (VIDEO) Hi I have been having this problem for a while but it has been happening more often this couple days. I dont know how to say it but when I start it it will go dead if I do not rev it up. I dont know if its the battery problem or starter. Video: Last edited by Trips; 01-31-2015 at 02:20 PM.

01-31-2015, 11:47 PM	#4 (permalink)
zeexu Base Member Join Date: Jun 2012 Location: NYC Posts: 51 Drives: 12 Nissan 370Z BS AT Rep Power: 13	Had this exact problem months ago. First it was just few times a month but it became worse and worse as time goes. cleaned throttle bodies and havent encounter the problem ever since DavidZ370 likes this.

02-01-2015, 12:14 AM	#5 (permalink)
Pintsize725 A True Z Fanatic Join Date: Jan 2012 Location: Austin Posts: 14,196 Drives: 2016 Mazda 6 Rep Power: 211844	Might be some other ideas here: Engine starts then dies I started with cleaning MAF sensors and TBs. I ended up getting long tube headers installed and haven't had an issue (yet) since remapping with UpRev. DavidZ370 likes this. __________________ Tracie

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2012 z dosnt start!! video inside	rAiN	Engine & Drivetrain	24	04-25-2014 08:20 PM
Car won't start? (seems like a unique issue?)	Fallen2Sleep	Engine & Drivetrain	21	11-05-2013 07:00 AM
Wouldn't start! Key fob issue.	Azroadster	Exterior & Interior	7	12-30-2011 03:08 PM
Help!!!! Push start button issue!!! Help!!!	Big 2 B.O.B.	Exterior & Interior	18	12-11-2011 12:35 PM
Weak Start / Stall (youtube Video)	GonGo	Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs	2	06-06-2011 09:30 AM

01-31-2015, 08:51 PM	#2 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,797 Drives: 2013 Nismo 370z Rep Power: 2684392	Symptoms of the idle air control valve being clogged up with junk. I would clean both throttle bodies.

01-31-2015, 08:53 PM	#3 (permalink)
DavidZ370 A True Z Fanatic Join Date: Oct 2013 Location: [= Posts: 1,065 Drives: 17' CWP STI Rep Power: 23	DUDE! I have the same damn problem but its a little better it doesn't turn off, what a trip man.

02-01-2015, 12:36 AM	#6 (permalink)
DavidZ370 A True Z Fanatic Join Date: Oct 2013 Location: [= Posts: 1,065 Drives: 17' CWP STI Rep Power: 23	Thank you guys I will also give this a shot

02-01-2015, 01:15 AM	#7 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,797 Drives: 2013 Nismo 370z Rep Power: 2684392	If you clean the throttle bodies you will most likely need to reset the ECM. In the older cars with drive by wire it was to turn the key on and off 3 times and leaving it on, Then depress the gas pedal to the floor 3 times very smoothly. Not sure on the Z. I would think it would be the same.