CJM Mini FP Gauge Kit

phunk · 11-09-2014, 08:28 PM

What we have here is a PnP 0-100psi fuel pressure gauge kit that sits towards the front of your engine (at the front of passenger side valvecover).

This is an inexpensive way to quickly determine the answer to the following questions: Is the fuel pump working at all? What is my fuel pressure? Is my mild fuel system upgrade about to run out of steam? Is my fuel pressure holding towards redline? Is my car not starting due to a fuel pressure / pump problem? Did I enlarge my swirl jet orifice in the sending unit enough to correct my idle pressure with my larger fuel pump? Of course, any tests under engine load must be performed on a dyno.

Gauges are highly valuable tools in diagnosing and monitoring modified vehicles!

The fitting is available separately for anyone who wants to use it for just adding their fuel pressure sensor for in-cabin gauge. The fitting can be turned around 180 degrees to face a sensor in the other direction.

Available in raw billet or black anodized.

Please note that installation will require trimming excess material off a local wiring bracket, or removing the bracket.

Ordering page: CJM Nissan Fuel Port Adapter

Installation Instructions: CLICK HERE

Chuy · 11-09-2014, 10:59 PM

Awesome product that works. I had an issue with my gauge, called them up and a week later had another at my front door. Awesome people to deal with.

phunk · 11-30-2014, 05:24 AM

a bump for good measure

AntiVenom · 09-27-2015, 05:51 PM

Any chance these are still available? Looked on your site and they aren´t on there but I figure it´s worth asking. Thanks!

phunk · 09-27-2015, 08:36 PM

Yes they are! There is 1 black one left in stock right now, and then a bunch of unanodized ones fresh from the machine 2 weeks ago.

The page is setup here now: CJM Fuel Tap NPT, Nissan 2-Bolt | CJ Motorsports

Its setup for ordering the fitting and the gauge that makes it into a complete little kit is optional.

Thanks

AntiVenom · 09-28-2015, 11:35 AM

Thanks! Just ordered it from the site R615999701

I´d prefer the black one

JARblue · 01-18-2020, 07:02 AM

The instructions reference using engine oil to lubricate the o-rings, but I'm guessing that's what the grease provided in the kit is for?

sirnixalot · 01-18-2020, 10:07 AM

Quote:

Originally Posted by JARblue

The instructions reference using engine oil to lubricate the o-rings, but I'm guessing that's what the grease provided in the kit is for?

I'm trying to remember if mine came with grease but either way once the Oring is lubed you're good to go

phunk · 01-20-2020, 03:24 PM

Yes you can use the supplied lube or engine oil, either will suffice. That lube is also great for installing fuel injectors or any other orings really. I saw a bucket of those little lube tubes on amazon for like $100 so I figured it was great to include with some products that use orings like this. Some people had accidentally torn their orings when installing these so I wanted to add that lube and I also made the oring chamfer 2 stages on the billet part to make it harder to tear it.

11-09-2014, 08:28 PM	#1 (permalink)
phunk A True Z Fanatic Join Date: Mar 2009 Location: Chicago Posts: 3,668 Drives: 370 Rep Power: 974723	CJM Mini FP Gauge Kit What we have here is a PnP 0-100psi fuel pressure gauge kit that sits towards the front of your engine (at the front of passenger side valvecover). This is an inexpensive way to quickly determine the answer to the following questions: Is the fuel pump working at all? What is my fuel pressure? Is my mild fuel system upgrade about to run out of steam? Is my fuel pressure holding towards redline? Is my car not starting due to a fuel pressure / pump problem? Did I enlarge my swirl jet orifice in the sending unit enough to correct my idle pressure with my larger fuel pump? Of course, any tests under engine load must be performed on a dyno. Gauges are highly valuable tools in diagnosing and monitoring modified vehicles! The fitting is available separately for anyone who wants to use it for just adding their fuel pressure sensor for in-cabin gauge. The fitting can be turned around 180 degrees to face a sensor in the other direction. Available in raw billet or black anodized. Please note that installation will require trimming excess material off a local wiring bracket, or removing the bracket. Ordering page: CJM Nissan Fuel Port Adapter Installation Instructions: CLICK HERE __________________ Charles @ CJ Motorsports : Website \| Facebook \| Instagram \| YouTube Home of the 9 second, stock longblock, stock drivetrain 6MT 370z. 9.91 @ 142mph Last edited by phunk; 02-04-2015 at 12:37 AM.

11-09-2014, 10:59 PM	#2 (permalink)
Chuy Enthusiast Member Join Date: Apr 2010 Location: Colorado Springs Posts: 474 Drives: 2015 NISMO Rep Power: 15	Awesome product that works. I had an issue with my gauge, called them up and a week later had another at my front door. Awesome people to deal with. phunk likes this. __________________ Miko 2015 Nismo Tech: nothing RIP Ginger 2009 370Z Sport Touring

09-27-2015, 05:51 PM	#4 (permalink)
AntiVenom Track Member Join Date: Nov 2014 Location: North Carolina Posts: 695 Drives: 2011 KAD 6MT Rep Power: 12	Any chance these are still available? Looked on your site and they aren´t on there but I figure it´s worth asking. Thanks! __________________ The GREY GHOST Chronicle instagram: jdmunilla

09-27-2015, 08:36 PM	#5 (permalink)
phunk A True Z Fanatic Join Date: Mar 2009 Location: Chicago Posts: 3,668 Drives: 370 Rep Power: 974723	Yes they are! There is 1 black one left in stock right now, and then a bunch of unanodized ones fresh from the machine 2 weeks ago. The page is setup here now: CJM Fuel Tap NPT, Nissan 2-Bolt \| CJ Motorsports Its setup for ordering the fitting and the gauge that makes it into a complete little kit is optional. Thanks __________________ Charles @ CJ Motorsports : Website \| Facebook \| Instagram \| YouTube Home of the 9 second, stock longblock, stock drivetrain 6MT 370z. 9.91 @ 142mph

09-28-2015, 11:35 AM	#6 (permalink)
AntiVenom Track Member Join Date: Nov 2014 Location: North Carolina Posts: 695 Drives: 2011 KAD 6MT Rep Power: 12	Thanks! Just ordered it from the site R615999701 I´d prefer the black one phunk likes this. __________________ The GREY GHOST Chronicle instagram: jdmunilla

01-18-2020, 07:02 AM	#7 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	The instructions reference using engine oil to lubricate the o-rings, but I'm guessing that's what the grease provided in the kit is for? __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

01-20-2020, 03:24 PM	#9 (permalink)
phunk A True Z Fanatic Join Date: Mar 2009 Location: Chicago Posts: 3,668 Drives: 370 Rep Power: 974723	Yes you can use the supplied lube or engine oil, either will suffice. That lube is also great for installing fuel injectors or any other orings really. I saw a bucket of those little lube tubes on amazon for like $100 so I figured it was great to include with some products that use orings like this. Some people had accidentally torn their orings when installing these so I wanted to add that lube and I also made the oring chamfer 2 stages on the billet part to make it harder to tear it. BettyZ likes this. __________________ Charles @ CJ Motorsports : Website \| Facebook \| Instagram \| YouTube Home of the 9 second, stock longblock, stock drivetrain 6MT 370z. 9.91 @ 142mph

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Mini cat cel fix	Zedx	Intake/Exhaust	10	03-09-2017 03:41 PM
CJM Mini FP Gauge Kit	phunk	Forced Induction	201	02-22-2016 03:27 PM
The Not-so-Mini	scottIN	Other Vehicles	4	06-20-2012 08:16 PM
How do you remove Gauge Cover & cover for tri gauge??	Carbon_z	Exterior & Interior	4	11-26-2010 10:07 PM
What happened to the tire pressure gauge and speedo in the middle gauge cluster?	rbratton	Nissan 370Z General Discussions	33	01-24-2009 11:28 PM