Here's an awesome video to show you how its done ! http://www.youtube.com/watch?v=-mmrKIn1K2M Or type in the search box on youtube: 370Z Tail Light Removal and LED CREE Installation
|
|
LinkBack | Thread Tools | Display Modes |
12-30-2013, 05:57 PM | #1 (permalink) |
Banned
Join Date: Jan 2012
Location: NYC
Posts: 272
Drives: z
Rep Power: 0 |
DIY: Tail Light REMOVAL VIDEO !!!
Here's an awesome video to show you how its done !
Or type in the search box on youtube: 370Z Tail Light Removal and LED CREE Installation Last edited by Trips; 12-30-2013 at 06:52 PM. |
01-31-2014, 03:13 PM | #5 (permalink) |
Track Member
|
thanks for finding this vid there, I just got my own reverse bulbs in!
__________________
2009 370z Solid Red Touring/Sport/Navigation/Illuminated sills/LED interior lights Red/LED plate lights White/ Evo R fog light in Red/Stillen G3 intakes/ Fast Intentions Exhaust with 18" Resonators/ Rays Gramlights 57fxx/ Swift Springs/ Fast Intentions Resonated Test Pipes. NST SUCKS DONT ORDER |
12-16-2014, 06:17 PM | #7 (permalink) |
A True Z Fanatic
Join Date: Jul 2014
Location: Mississippi
Posts: 1,117
Drives: Nismo& Sport/Touring
Rep Power: 17 |
I am not sure, i second this
__________________
Build in Progress |
12-16-2014, 06:46 PM | #10 (permalink) |
A True Z Fanatic
Join Date: Jul 2014
Location: Mississippi
Posts: 1,117
Drives: Nismo& Sport/Touring
Rep Power: 17 |
Thanks for the reply.
__________________
Build in Progress |
05-24-2016, 10:41 PM | #12 (permalink) |
Base Member
Join Date: Jan 2013
Location: CA
Posts: 26
Drives: 13 Nismo MagmaRed M6
Rep Power: 12 |
I just did this and here is what I learned. Once the one nut and two bolts are removed there are two clips that hold the light housing on. The top one is blue and the bottom one is red. Grab the light and pull straight back to release the pins on the light housing from the clips on the body of the car. I recommend putting tape on the upper corner of the bumper where the corner of the light meets the body/ bumper. Look carefully at the front corner of my bumper and you will see where the front lower tip of the light chipped the paint. (near the black circle piece).
|
10-09-2016, 02:08 AM | #13 (permalink) |
Base Member
Join Date: Sep 2015
Location: Wylie, TX
Posts: 122
Drives: 14 Nissan 370Z Nismo
Rep Power: 10 |
Hi, did anyone had an issue installing the light back on the car? I am trying to do it and it look everything in the right place but I have a gap that will allow water to get in there. I have only removed one side and the order side looks like sitting closer to the car with no gap. Any ideas?
Sent from my iPhone using Tapatalk |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
DIY REMOVAL OF THIRD brake light!!!!!!!! | simota1 | DIY Section (Do-It-Yourself) | 33 | 10-04-2022 08:51 AM |
tail light out warning light | cossie1600 | Exterior & Interior | 0 | 06-28-2011 09:15 PM |
Local 370z needed for smoked tail light and head light fitting | dantegts | Southern California Region | 11 | 04-07-2010 08:55 PM |
smoked tail light and head light volunteer covina, ca area | dantegts | Exterior & Interior | 0 | 08-29-2009 01:33 PM |
+ Removal of Tail Lights + | batman_4 | Exterior & Interior | 34 | 06-22-2009 08:26 PM |