DRL Delete

SteveBad · 10-21-2013, 11:49 PM

Not for everyone, but I like it..... Decided to delete DRL on my '13, and replace with slots

Pic 1..... When wifey / GF leaves to go shopping, take a comforter and lay it out to save the fascia from scratches. Tape up the area shown for same reason.

I will not detail how to remove fascia, refer to other excellent "how to's" in this same DIY forum.

Pic 2..... Remove the DRL's ..(No, I'm NOT selling them!)

Pic 3.... Cut up metal gutter screening bought from big box hardware store. It's plastic-coated, and will never rust. Make a cardboard template as a pattern. Leave long "tabs" to secure screen to fascia interior. Use a quality tinsnips for this.

Pic 4.... Here you see the "tabs" I left, bent and finessed as necessary, and secured to the fascia with hot glue. I then used "JB Weld " to make sure the screen wasn't going anywhere.

After the JB sets, remount the fascia.

Pics 5 & 6...... Finished. The screens are really firmly secured. I think it looks much better. I intend to make them functional by mounting a 2-inch bezel in the inner wheelwell, aimed at the rotors. When you remove the fascia, you will see the baffles mounted inside which form a closed box. This would direct air entering the vent, and out the 2" bezel. This is effectively how the brake cooling works on C-5 Corvettes. (Yes, I had one, and have examined it.)

The only glitch to brake cooling functionality is the windshield wash reservoir on the passenger side, but I left it in place, and will devise a work-around.

Again, if you don't like this mod, no big deal. It's my car, my way.

ZeroZeta · 10-22-2013, 01:35 AM

Looks really clean Steve. Well done!

MB37 · 10-22-2013, 01:28 PM

Would never of thought to do this. Too bad I like my DRLs too much =\

carlitos_370z · 07-15-2014, 10:41 AM

I like too much my DRL but im thinking about to do this

wheee! · 07-15-2014, 11:26 AM

I always hated the DRL's on the 13's so this is awesome! love it!

kenchan · 07-15-2014, 12:47 PM

looks good. can you port it somehow to make it functional for brake cooling or something?

i suppose if you have the aem type intake that breaths from the fender wheelwell, that could work well too.

carlitos_370z · 07-15-2014, 01:02 PM

if i do it i think im going to use it as brake duct

Tazicon · 07-15-2014, 01:22 PM

This is great! The DRLs look too much like an after thought and should have never been added. This looks nice and clean, good job!

Tazicon · 07-15-2014, 01:24 PM

Quote:

Originally Posted by carlitos_370z

if i do it i think im going to use it as brake duct

This would be a great way to get cooling into the brakes. I have seen several set ups with the G's through the fog light location.

carlitos_370z · 07-15-2014, 01:49 PM

Quote:

Originally Posted by Tazicon

This would be a great way to get cooling into the brakes. I have seen several set ups with the G's through the fog light location.

when i take my car to the paint shop to paint the front bumper and the lip im going to try this

sothayoth · 06-03-2021, 05:17 PM

any error codes pop up when you disconnected the DRL?

axmea? · 06-03-2021, 05:28 PM

What if just backed out?

10-22-2013, 01:28 PM	#3 (permalink)
MB37 Base Member Join Date: Jun 2013 Location: Modesto, Ca Posts: 72 Drives: 2013 MB 370z Rep Power: 12	Would never of thought to do this. Too bad I like my DRLs too much =\ synolimit and Smashley like this. __________________ VrooOoOoooOm

07-15-2014, 11:26 AM	#5 (permalink)
wheee! A True Z Fanatic Join Date: Sep 2009 Location: Mod Capital of Canada Age: 57 Posts: 7,354 Drives: cars. lots of cars. Rep Power: 40182	I always hated the DRL's on the 13's so this is awesome! love it! __________________ H&R / Stillen / Berk / HKS / Swift / Michelin / UpRev / SPC / Amuse Rep / Seibon / Fringe XVO / TWM / more... My Journal

07-15-2014, 12:47 PM	#6 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	looks good. can you port it somehow to make it functional for brake cooling or something? i suppose if you have the aem type intake that breaths from the fender wheelwell, that could work well too. carlitos_370z likes this.

07-15-2014, 01:22 PM	#8 (permalink)
Tazicon Track Member Join Date: Mar 2012 Location: Vegas Baby! Posts: 773 Drives: German/British cars Rep Power: 14	This is great! The DRLs look too much like an after thought and should have never been added. This looks nice and clean, good job! carlitos_370z likes this. __________________ Porsche, it's a 2 syllable word

06-03-2021, 05:28 PM	#12 (permalink)
axmea? A True Z Fanatic Join Date: Apr 2012 Location: SoCal Posts: 6,235 Drives: WELL ZED PW 6MT Rep Power: 53241	What if just backed out? __________________ >MyZ's Album< NISMO Convert/ECUTEK/Takeda CAI/F.I. HFC NR CB Carbon/F.I. 34 Row Oil Cooler/4.08 Final Drive /Powertrix+Swifts/Hotchkis/SPL/Whiteline/TWM/Zoom Engineering/EVO-R/AeroJacket Vented CF Fenders + CF Spoiler/Avant Garde-WORK/NST/Morimoto Halo/STi Clear Lenses/Carbon Signal Automotive/RJM Performance/ZSpeed Clutch Flywheel CSC delete

10-22-2013, 01:35 AM	#2 (permalink)
ZeroZeta Track Member Join Date: Aug 2013 Location: Austin TX Posts: 543 Drives: 2013 Z Rep Power: 13	Looks really clean Steve. Well done!

07-15-2014, 10:41 AM	#4 (permalink)
carlitos_370z A True Z Fanatic Join Date: Jul 2013 Location: Puerto Rico Posts: 7,157 Drives: 13 Nissan 370Z SP M6 Rep Power: 7586	I like too much my DRL but im thinking about to do this

07-15-2014, 01:02 PM	#7 (permalink)
carlitos_370z A True Z Fanatic Join Date: Jul 2013 Location: Puerto Rico Posts: 7,157 Drives: 13 Nissan 370Z SP M6 Rep Power: 7586	if i do it i think im going to use it as brake duct

06-03-2021, 05:17 PM	#11 (permalink)
sothayoth Base Member Join Date: Sep 2015 Location: Edmonton,AB Posts: 21 Drives: 2016 370z M6 Rep Power: 10	any error codes pop up when you disconnected the DRL?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[WTB] delete	bat6wc	Parts for sale (Private Classifieds)	4	06-25-2013 01:21 AM
Delete account	Unicorn_blood	Introduction	1	03-23-2010 03:42 AM