DIY: Hood with windshield sprayer

Rsdntevl · 08-19-2011, 02:33 AM

Has anyone put on an aftermarket hood while retaining the windshield sprayer? I didn't want to break connecting plastic and the sprayer nozzle. If anyone has tried it before please let me know. Thanks.

Trips · 08-19-2011, 02:53 AM

I would recommend getting the six plastic hose clips replaced and not bother tearing up the originals. The center nozzles will pop off with no problem.
I disconnected the hose from the nozzles and pulled the hose from the clips leaving the clips. Once you get the replacement hood use the new clips.

08-19-2011, 02:33 AM	#1 (permalink)
Rsdntevl Base Member Join Date: Jan 2011 Location: Los Angeles Posts: 157 Drives: 2010-370z-Grey-6MT Rep Power: 14	DIY: Hood with windshield sprayer Has anyone put on an aftermarket hood while retaining the windshield sprayer? I didn't want to break connecting plastic and the sprayer nozzle. If anyone has tried it before please let me know. Thanks. Last edited by Rsdntevl; 08-19-2011 at 02:39 AM.

08-19-2011, 02:53 AM	#2 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,732 Drives: 🔰 Rep Power: 10	I would recommend getting the six plastic hose clips replaced and not bother tearing up the originals. The center nozzles will pop off with no problem. I disconnected the hose from the nozzles and pulled the hose from the clips leaving the clips. Once you get the replacement hood use the new clips. GalletGun likes this. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nissan 370z Raised Hood Kit / Hood Spacer Kit	Mak	Exterior & Interior	39	12-20-2020 11:24 AM
Windshield wipers	Blackbelt	Exterior & Interior	8	05-12-2011 10:37 PM
Kwazar Mercury Pro + Sprayer Promotion	DetailersDomain	Detailing / Washing / Waxing / Cosmetic Maintenance and Repair	0	02-12-2011 02:45 PM
Windshield Wonder	LunaZ	Exterior & Interior	1	05-08-2010 06:35 PM
windshield	polarity	Nissan 370Z General Discussions	10	10-27-2009 05:37 PM