|
I am in the middle of this project along with sub-frame collars from Z1. 1. I purchased the removal tool from GK Tech, similar to Z1. This helped in removing
|
|||||||
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
10-04-2022, 08:27 PM
|
#1 (permalink) |
|
Base Member
Join Date: Mar 2014
Location: Urbandale, Iowa
Posts: 87
Drives: 14 silver sport 370Z
Rep Power: 12  |
I am in the middle of this project along with sub-frame collars from Z1.
1. I purchased the removal tool from GK Tech, similar to Z1. This helped in removing the old bushing core and I used it to install the new bushing. However, it was useless in removing the old sleeve. IMO you will need a reciprocating saw to remove. 2. Make sure to have the bushing flush with the front of the frame. Failure to do this will mean the mounting holes for the other two bushings will not align. And you'll need to redo the rear bushing. 3. I agree having a 2nd person will help a lot in finessing the diff into place. |
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Lessons learned on the TT install | Girald | Forced Induction | 37 | 08-08-2020 11:58 AM |
| Diff bushing install | zdirtyfour | DIY Section (Do-It-Yourself) | 4 | 07-29-2019 01:12 PM |
| Whiteline Rear Diff Bushing Install | bkngo | Brakes & Suspension | 1 | 02-11-2019 10:01 PM |
| CarFAX and AutoCheck – Lessons Learned | Nargrakhan | Nissan 370Z Pricing / Ordering Discussions | 3 | 01-02-2015 10:05 PM |
| Exporting out of Miami, lessons learned | BertVermaas | Nissan 370Z Pricing / Ordering Discussions | 8 | 05-09-2009 06:56 AM |
10Likes
Hybrid Mode
