eZ Navi Delete Interest/Availability

radensb

I am not sure where to put this, so I have included it in Audio and DIY. Admins - please advise if there is a better/more appropriate way of doing this.

I have been working on the eZ Navi Delete system for my 2009 370Z with factory Navi so that I could put in a custom system. As anyone with a Navi based model knows, the Navi models have the AC controls embedded with the factory stereo controls, thus removing them and the factory Head Unit removes access to control the AC system. This is the only reason that none of the aftermarket car stereo equipment is compatible with the Navi models and website descriptions label them “non-Navi”.

This project was developed as a cleaner and simpler plug-n-play alternative to the original method of Navi Delete using the base model AC controls and swapping out the Navi based AC AMP for the non-Navi AC AMP, running the needed wires to the fuze box, adding pins and splicing into the existing wiring harness. There have been interested followers and PM’s regarding this project and how it could be made available. Bare PCB’s will be available for purchase and I am bringing up a Github repo to make the design files, source code, and flashable files available so that anyone can DIY this. I have also gotten interest in providing assembled, ready to go boards as assembling on the these PCB’s with parts can be quite challenging, especially if you don’t have the proper soldering equipment.

So, the purpose of this post is to get a gauge of the interest people have in the project and to see if building a set of assembled PCB’s is feasible.

• Do you have a Navi based 370Z and want to install an aftermarket Head Unit?
• Is there interest in a plug-n-play solution at equivalent cost?

Here is a rough cost breakdown I came up with. Others with more knowledge on the needs of the original conversion method, please comment.



I have put a lot of resources and work into this project over the last year and a half and it seems like a waste if it’s not available to others that wish to do the same thing. I am just not sure what the best delivery mechanism is, which is always an issue with this kind of custom niche electronics.

Resources:
• Original non-Navi AC AMP swap thread
• eZ Navi-Delete thread
• eZ Navi-Delete Github Repo (work in progress)
• My new stereo install example

Interested in thoughts.

raps101

I don't fully understand everything you're talking about, but I've wanting to change/upgrade/remove my 09's nav bose audio system since I got it! I just don't know who to turn to and I don't know if it's possible.

Sent from my SM-G965U using Tapatalk

radensb

We share the same story. I developed this because I wanted to replace the stereo in my 2009 navi equipped 370Z. The navi based Z's have the AC controls integrated with the radio/stereo controls, as I'm sure you are aware of. Removing that interface to remove the factory stereo (and navi) causes a loss of access to the AC control. This projects purpose is to do exactly what you want to do. It allows you to use the base model 370Z AC control module in your navi model Z. Now, you can install any aftermarket stereo system or tablet based system (like Braniac) just as you would in a non navi Z. It also has the capability to decode the steering wheel controls and breakout useful signals to use in a custom installation (like the parking break, speed, reverse signals), such as a tablet based install like the Brainiac.

It's not completed yet, but here is my installation.
Joying Android 9.7" HU Install (~90% complete...)