HardWire for Invisicord MirrorWire (Escort Radar)

Joker_J · 03-01-2017, 06:06 PM

I know there are other DIY or posts about this but they are all outdated and can't seem to answer what I need... :/
I bought the blend mount and invisicord (black/red ends) to install but i'm at a stand still. I read about how to do it, but like some, without pics I'm clueless on these type of things.
I have a 2014 sports/touring Z with the built in rear view camera on the rear view mirror. Will this change how I can install the wire? Whoever has installed it, do you have any pics on how to take off the cap of the power mirror and where to place the wires?

Thanks in Advance!

cooltoy · 03-01-2017, 08:09 PM

I got your PM.

Unfortunately my car is under the cover in storage for the winter. I guess I can climb under there if you need a picture.

I used one of the DIY here. But I can not find it. You need to pull out the plug in harness to the mirror and then the wiring for the mirror is:

black/red - switched power
yellow - always on power
black - ground

so plug the yellow wire of the invisicord into the harness where the black/red wire is. Plug the black invisicord into the harness where the black wire is. Plug back in the harness and you are done!

If you have a 2014 and up, its black/red, black/white and black/yellow wires.

Black invisicord goes to black/white, red goes to black red.

Maybe this video will help.

https://www.youtube.com/watch?v=nD5iZcwA08k

Joker_J · 03-01-2017, 10:24 PM

Quote:

Originally Posted by cooltoy

I got your PM.

Unfortunately my car is under the cover in storage for the winter. I guess I can climb under there if you need a picture.

I used one of the DIY here. But I can not find it. You need to pull out the plug in harness to the mirror and then the wiring for the mirror is:

black/red - switched power
yellow - always on power
black - ground

so plug the yellow wire of the invisicord into the harness where the black/red wire is. Plug the black invisicord into the harness where the black wire is. Plug back in the harness and you are done!

If you have a 2014 and up, its black/red, black/white and black/yellow wires.

Black invisicord goes to black/white, red goes to black red.

Maybe this video will help.

https://www.youtube.com/watch?v=nD5iZcwA08k

Thanks! I'll have to take a look at it tomorrow or Friday when I attempt it lol
Yea, the invisicord that I purchased only has a red and black tip, no yellow :/

cooltoy · 03-01-2017, 10:46 PM

Right. Mine was the same, so then it is Black invisicord goes to black/white on the mirror harness, red goes to black/red on the harness. Your harness should be the same as mine.

Yellow inviscord wire is the same as red.

Joker_J · 03-10-2017, 12:36 PM

Quote:

Originally Posted by cooltoy

Right. Mine was the same, so then it is Black invisicord goes to black/white on the mirror harness, red goes to black/red on the harness. Your harness should be the same as mine.

Yellow inviscord wire is the same as red.

@cooltoy So I took the clip out to see the wiring and none of the wires are together lol they all have their seperate spots...i'm not sure where I need to place the stuff -_-...

Zat_Zuma · 03-10-2017, 01:02 PM

Don't you have the 2014 service manual?
The wiring diagrams are in there with the proper color codes.

I suggest you find the free downloads site and then get to work.

03-01-2017, 06:06 PM	#1 (permalink)
Joker_J Track Member Join Date: Aug 2014 Location: The Ville, KY Posts: 580 Drives: 2014 NISSAN 370Z Rep Power: 13	HardWire for Invisicord MirrorWire (Escort Radar) I know there are other DIY or posts about this but they are all outdated and can't seem to answer what I need... :/ I bought the blend mount and invisicord (black/red ends) to install but i'm at a stand still. I read about how to do it, but like some, without pics I'm clueless on these type of things. I have a 2014 sports/touring Z with the built in rear view camera on the rear view mirror. Will this change how I can install the wire? Whoever has installed it, do you have any pics on how to take off the cap of the power mirror and where to place the wires? Thanks in Advance!

03-01-2017, 08:09 PM	#2 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,971 Drives: 14 PW 370Z S/T MT Rep Power: 243722	I got your PM. Unfortunately my car is under the cover in storage for the winter. I guess I can climb under there if you need a picture. I used one of the DIY here. But I can not find it. You need to pull out the plug in harness to the mirror and then the wiring for the mirror is: black/red - switched power yellow - always on power black - ground so plug the yellow wire of the invisicord into the harness where the black/red wire is. Plug the black invisicord into the harness where the black wire is. Plug back in the harness and you are done! If you have a 2014 and up, its black/red, black/white and black/yellow wires. Black invisicord goes to black/white, red goes to black red. Maybe this video will help. https://www.youtube.com/watch?v=nD5iZcwA08k BeemaaZ and Joker_J like this. __________________ Member of kenchan's "photoshopped mods" and "proper offsets" gang. Last edited by cooltoy; 03-01-2017 at 08:14 PM.

03-01-2017, 10:46 PM	#4 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,971 Drives: 14 PW 370Z S/T MT Rep Power: 243722	Right. Mine was the same, so then it is Black invisicord goes to black/white on the mirror harness, red goes to black/red on the harness. Your harness should be the same as mine. Yellow inviscord wire is the same as red. __________________ Member of kenchan's "photoshopped mods" and "proper offsets" gang.

03-10-2017, 01:02 PM	#6 (permalink)
Zat_Zuma A True Z Fanatic Join Date: Nov 2008 Location: Edmonton, Alberta ...eh Posts: 1,171 Drives: 2017 Touring auto Rep Power: 19	Don't you have the 2014 service manual? The wiring diagrams are in there with the proper color codes. I suggest you find the free downloads site and then get to work. __________________ [B]2009 & 2017 370Z Touring Sport Autos SOLD

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Passport Escort 8500 x50 with Mikes mount & invisicord	kday	Parts for sale (Private Classifieds)	4	05-25-2014 10:44 AM
[FOR SALE] Escort 9500ix radar red display w/hardwire custom switch MINT	SATX_NISMO	Parts for sale (Private Classifieds)	23	10-21-2013 09:46 PM
[FOR SALE] Valentine One V1 Radar Detector w/ Blendmount and Invisicord	aadosx	Parts for sale (Private Classifieds)	5	12-13-2012 01:45 PM
FS: OEM Wheel Locks, CF B Pillars, Escort Radar Mount w/ Invisicord	Eman	Parts for sale (Private Classifieds)	10	06-16-2010 06:35 PM
Escort radar detector hardwire	HellfighterZ	Audio & Video	6	04-16-2010 08:07 PM