ART PIPES Install DIY??

ItsOmega · 01-20-2016, 12:16 AM

I've searched the DIY and I can not find a DIY for this. If there is, can you please point me in that direction,

Thanks in advance

Trips · 01-20-2016, 02:12 AM

If you still have the stock cats?

Look in here and be warned about the famous demon bolts.

Demon Bolts

There really isn't a DIY since it pretty straight forward.

I suggest carefully removing your stock or aftermarket intakes so you have plenty of room to see where you're attaching the socket with looooooong extensions.

Carefully remove the o2 sensors, cats brace, intakes, loosen the front demon bolts and rear bolts.

Have FUN!

Mysilverz · 01-24-2016, 11:25 AM

There is a DIY for high flow cats. Just use it as your guide.

Z Runner · 01-24-2016, 11:44 AM

I was installing art pipes few weeks ago and non of the DIY says that that is more easier to remove air intake on both side to get those pain a butt bolts that installed in reverse on oem cats. Save your self lots of time by removing intakes and using long extension to get them with the air gun from the top. Good luck!

01-20-2016, 12:16 AM	#1 (permalink)
ItsOmega Base Member Join Date: Nov 2014 Location: Georgia Posts: 31 Drives: 2013 370z Silver Rep Power: 11	ART PIPES Install DIY?? I've searched the DIY and I can not find a DIY for this. If there is, can you please point me in that direction, Thanks in advance

01-20-2016, 02:12 AM	#2 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,730 Drives: 🔰 Rep Power: 10	If you still have the stock cats? Look in here and be warned about the famous demon bolts. Demon Bolts There really isn't a DIY since it pretty straight forward. I suggest carefully removing your stock or aftermarket intakes so you have plenty of room to see where you're attaching the socket with looooooong extensions. Carefully remove the o2 sensors, cats brace, intakes, loosen the front demon bolts and rear bolts. Have FUN! Memphis370Z likes this. __________________

01-24-2016, 11:44 AM	#4 (permalink)
Z Runner Enthusiast Member Join Date: Sep 2015 Location: Puerto Rico Posts: 332 Drives: 2016 370Z KAD M Base Rep Power: 27	I was installing art pipes few weeks ago and non of the DIY says that that is more easier to remove air intake on both side to get those pain a butt bolts that installed in reverse on oem cats. Save your self lots of time by removing intakes and using long extension to get them with the air gun from the top. Good luck! ItsOmega likes this. Last edited by Z Runner; 01-24-2016 at 11:48 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
370z Midpipes/Down Pipes/Y-Pipes/Test Pipes and HFC!! Best Prices in town!	JM Auto Racing	Exhaust/Intake	472	11-28-2022 01:57 PM
Test pipes install, fail. Opinions and advice please!	shika805	Intake/Exhaust	54	03-18-2013 01:45 AM
ART pipes v3 - Install	NV370z	Intake/Exhaust	43	06-26-2012 03:33 PM
Motordyne ART Pipes Install at Alphawerx	Paskii	Canada	3	08-20-2011 03:32 PM

01-24-2016, 11:25 AM	#3 (permalink)
Mysilverz Base Member Join Date: Jun 2015 Location: Birminham Al Posts: 205 Drives: 2013 370z silver M6 Rep Power: 10	There is a DIY for high flow cats. Just use it as your guide.