Window Reset

The BlueMax · 11-03-2015, 07:10 PM

I forget where I put the procedure for aligning the driver side window after a battery replacement, can someone show me the steps thanks

Trips · 11-03-2015, 07:22 PM

Proper procedure, manual page 2-41:

If the windows do not close automatically

If the power window automatic function (closing only) does not operate properly, perform the following procedure to initialize the power window system.

1. Push the ignition switch to the ON position.

2. Close the door.

3. Open the window completely by operating the power window switch.

4. Pull the power window switch and hold it to close the window, and then hold the switch more than 3 seconds after the window is closed completely.

5. Release the power window switch. Operate the window by the automatic function to confirm the initialization is complete.

6. Perform steps 2 through 5 above for other windows.

If the power window automatic function does not operate properly after performing the procedure above, have your vehicle checked by a NISSAN dealer.

11-03-2015, 07:10 PM	#1 (permalink)
The BlueMax Enthusiast Member Join Date: Jan 2010 Location: Louisville Posts: 337 Drives: 09 370/97 T/A 01 ZRX Rep Power: 25	Window Reset I forget where I put the procedure for aligning the driver side window after a battery replacement, can someone show me the steps thanks __________________ The Blue Max

11-03-2015, 07:22 PM	#2 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,730 Drives: 🔰 Rep Power: 10	Proper procedure, manual page 2-41: If the windows do not close automatically If the power window automatic function (closing only) does not operate properly, perform the following procedure to initialize the power window system. 1. Push the ignition switch to the ON position. 2. Close the door. 3. Open the window completely by operating the power window switch. 4. Pull the power window switch and hold it to close the window, and then hold the switch more than 3 seconds after the window is closed completely. 5. Release the power window switch. Operate the window by the automatic function to confirm the initialization is complete. 6. Perform steps 2 through 5 above for other windows. If the power window automatic function does not operate properly after performing the procedure above, have your vehicle checked by a NISSAN dealer. eastwest2300, JARblue, Memphis370Z and 1 others like this. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
When does the ECU reset?	Exhaust	Engine & Drivetrain	2	06-13-2015 01:48 AM
Window reset isn't working for me	Ole Rusty	Audio & Video	9	11-30-2014 07:48 PM
[WTB] window switch and window regulator	fairz	Parts for sale (Private Classifieds)	0	01-04-2014 01:07 AM
Key fob reset	The BlueMax	Exterior & Interior	3	05-27-2013 11:06 PM
Help: Adjusting/aligning window (need more help than just window-reset procedure)	k.alexander	Exterior & Interior	7	03-01-2013 09:12 AM