P&S Bead Maker

markesc · 01-12-2019, 12:41 AM

Just wanted to keep this short:

Beyond expectations / Well worth the $30 for a whole gallon

Backround: Car was polished a few weeks ago, finally had a break in the weather for a wash, dried, then gave it a good spray down of the Bead Maker.

I've used a number of consumer level waxes / polishes / glaze combo's on this car in the past 5 years, and this stuff just works!!!

I'd strongly recommend giving it a shot for those looking for a quick topper. Can go ontop any wax/sealant/ceramic and!!! ANY SURFACE type!

Small operation, not just another "me too" company that outsources the job to one of the big blenders *cough* chemical guys/adams/etc...

Really neat story about 2 people that have been in the game for 30+ years:

https://www.youtube.com/watch?v=yd35xigJM2E

Crappy photo from this evening:

God-Speed · 01-12-2019, 07:25 AM

Looking Good!!!

RonRizz · 01-13-2019, 08:45 AM

am I seeing hella water spots, or are they marks in the flooring?

SouthArk370Z · 01-13-2019, 10:06 AM

Quote:

Originally Posted by RonRizz

am I seeing hella water spots, or are they marks in the flooring?

Hard to tell from the photo (OP admits it's crappy) but that looks like the paint needs to be buffed out to me. Fingers crossed that it's just reflected spots on the floor.

OxZed · 01-13-2019, 09:02 PM

Quote:

Originally Posted by RonRizz

am I seeing hella water spots, or are they marks in the flooring?

That's the pattern in the VCT tile flooring ...

RonRizz · 01-14-2019, 05:32 PM

ahhh.. Makes sense.

markesc · 01-19-2019, 01:29 PM

Just wanted to report back:

The car stays MUCH cleaner now after a few back to back days of driving in the rain, garage, rain, etc. A lot less dirt sticks to the back of the car now.

Spoiler · 01-31-2019, 02:53 PM

I might just give this a try... thanks for the feedback/review

01-13-2019, 08:45 AM	#3 (permalink)
RonRizz A True Z Fanatic Join Date: Aug 2011 Location: Pine grove, Pa Posts: 2,136 Drives: 2 feet, 3 pedals Rep Power: 6775	am I seeing hella water spots, or are they marks in the flooring? __________________ P99rs Head Unit--- Amps- 2 Pioneer Prs800d --- Zapco ST1000MX---Zapco ST-4XSQ---- SI BM mk5 Subs---SI TM65v2 Midbass--- SI M3 mids--- SI M25 xbl2 tweeters ----- 2016 MECA street class 3rd place at world finals

01-14-2019, 05:32 PM	#6 (permalink)
RonRizz A True Z Fanatic Join Date: Aug 2011 Location: Pine grove, Pa Posts: 2,136 Drives: 2 feet, 3 pedals Rep Power: 6775	ahhh.. Makes sense. __________________ P99rs Head Unit--- Amps- 2 Pioneer Prs800d --- Zapco ST1000MX---Zapco ST-4XSQ---- SI BM mk5 Subs---SI TM65v2 Midbass--- SI M3 mids--- SI M25 xbl2 tweeters ----- 2016 MECA street class 3rd place at world finals

01-19-2019, 01:29 PM	#7 (permalink)
markesc Enthusiast Member Join Date: Apr 2014 Location: Utah Posts: 380 Drives: 2014 370z M.B. 7AT Rep Power: 3366	Just wanted to report back: The car stays MUCH cleaner now after a few back to back days of driving in the rain, garage, rain, etc. A lot less dirt sticks to the back of the car now. God-Speed, Memphis370Z, mikeb and 1 others like this.

01-31-2019, 02:53 PM	#8 (permalink)
Spoiler A True Z Fanatic Join Date: Jun 2015 Location: Central Florida Age: 65 Posts: 8,409 Drives: 21 Supra -Blk/Red Rep Power: 2684380	I might just give this a try... thanks for the feedback/review __________________ … I SUPPORT HOES WITH SUPPORT HOSE…

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
3d printed bead clamp	nismoZium	Wheels & Tires	1	04-23-2018 02:10 PM
Wheel and maker?	Inspector71	Wheels & Tires	28	02-12-2016 09:18 AM
Tire Bead Rip	Digitul	Wheels & Tires	7	02-09-2015 12:34 AM
Reverse Bead Rims	TongMan	Wheels & Tires	3	10-13-2011 03:00 PM

01-12-2019, 07:25 AM	#2 (permalink)
God-Speed A True Z Fanatic Join Date: Sep 2010 Location: Austin, Tx. Posts: 4,363 Drives: Prototype Rep Power: 2684377	Looking Good!!!