Aftermarket brake kits- what's your setup and how do you like it?

cycy89 · 12-12-2013, 10:24 AM

I've searched around and couldn't find a thread about aftermarket brake kits (I'm pretty sure there is one if I looked hard enough). I'm in the market of getting a big brake kit and want to hear what you guys have to say before I make a decision! Feel free to post up anything, everything you know about brake kits!

osbornsm · 12-12-2013, 11:10 AM

Get:

2-Piece rotors
Motul RBF600
Carbotech Pads XP_
Brake Ducting

...and that will cost you approx $1,000.

OR you can spend $3600 on Stoptech or Brembos??
- I don't see the advantage if you already have the sport brake calipers

If you are not going to the track (road course), then do NOT buy a BBK unless you wanna spend 4k on bling.

cycy89 · 12-12-2013, 11:54 AM

I have stillen drilled/slotted rotors, ss lines and motul brake fluid right now. I'm selling my setup and upgrade to bigger brakes. I do track my car and it's getting TT right now.

cycy89 · 12-12-2013, 11:59 AM

More going power needs more stopping power lol

DEpointfive0 · 12-12-2013, 12:05 PM

Sorry for the off topic, but are you getting a bigger radiator?

Also, get cooling ducts and... Stick to a brand name, I believe Mike runs StopTech and Spohn runs Brembo, I might be wrong about Spohn.
And know that the BBK rotors last 10-20 track days depending on usage, so have plenty of money for replacement discs.

ValidusVentus · 12-12-2013, 04:20 PM

Check my sig.

Juan@Fontana · 12-12-2013, 04:23 PM

i have R33 GTR brembos on my car, it was making about low 400hp before i took her apart for the new build. I run Endless MX-72 pads with Endless RF650 fluid and I have no complaints at all. I currently run them with DBA Rotors and have Zero complaints. I street and Track the car and those brakes seem to be a good combo.

recently before i put her away for the winter i started using the MA20 pads from Endless in the track since i started going faster and liked them more at the track but where a bit loud on the street and kind of sketchy when cold.

-Juan

ValidusVentus · 12-12-2013, 04:31 PM

Quote:

Originally Posted by Juan@Fontana

i have R33 GTR brembos on my car, it was making about low 400hp before i took her apart for the new build. I run Endless MX-72 pads with Endless RF650 fluid and I have no complaints at all. I currently run them with DBA Rotors and have Zero complaints. I street and Track the car and those brakes seem to be a good combo.

recently before i put her away for the winter i started using the MA20 pads from Endless in the track since i started going faster and liked them more at the track but where a bit loud on the street and kind of sketchy when cold.

-Juan

Yep, this is what I run

, with the addition of the stillen cooling ducting for the front. Any other impresions from the MA20s? havent tried them. Also, a new brand of brake fluid just came out that I think I will be switching to even over the RF650 (I know, right). Its called Torque RT700. Check it out, its cheaper too. You guys should start stocking this over at good ol NRS so I can buy it from you!

Juan@Fontana · 12-12-2013, 05:46 PM

Quote:

Originally Posted by ValidusVentus

Yep, this is what I run

, with the addition of the stillen cooling ducting for the front. Any other impresions from the MA20s? havent tried them. Also, a new brand of brake fluid just came out that I think I will be switching to even over the RF650 (I know, right). Its called Torque RT700. Check it out, its cheaper too. You guys should start stocking this over at good ol NRS so I can buy it from you!

very interesting I will have to give this a try.

cycy89 · 12-12-2013, 06:17 PM

Very good info
Thanks guys!!

rlhotka · 12-13-2013, 05:54 PM

So does that mean there are a bunch of Akebono system's for sale for me?

cycy89 · 12-13-2013, 07:01 PM

Mine's already sold..

DLo · 12-13-2013, 11:15 PM

Here is what I did:

NISMO Circular Brake Ducts Using Revotec Inlets & Stillen Brake Cooling Kit

12-12-2013, 10:24 AM	#1 (permalink)
cycy89 A True Z Fanatic Join Date: Jun 2011 Location: 120mph somewhere Posts: 1,097 Drives: #TTURBOZ Rep Power: 30	Aftermarket brake kits- what's your setup and how do you like it? I've searched around and couldn't find a thread about aftermarket brake kits (I'm pretty sure there is one if I looked hard enough). I'm in the market of getting a big brake kit and want to hear what you guys have to say before I make a decision! Feel free to post up anything, everything you know about brake kits! __________________ Fast Intentions Twin Turbo Kit GT2860RS, 677WHP\|FI 34 row oil cooler\|F.I. CBE\|Fast 500E return fuel system\|FI trans cooler\|FI billet aluminum flex plate\|Excedy clutch packs\|ENKEI RP03\|BC BR coilovers\|SEIBON Carbon\|EVO-R Rear fog light\|GTR push start\|Whiteline sway bars, Diff bushing\|DSS axles\|ECUTekW/FlexFuelTune

12-12-2013, 11:10 AM	#2 (permalink)
osbornsm A True Z Fanatic Join Date: Jun 2011 Location: WHAT Posts: 2,551 Drives: 2018 Camaro SS 1LE Rep Power: 424	Get: 2-Piece rotors Motul RBF600 Carbotech Pads XP_ Brake Ducting ...and that will cost you approx $1,000. OR you can spend $3600 on Stoptech or Brembos?? - I don't see the advantage if you already have the sport brake calipers If you are not going to the track (road course), then do NOT buy a BBK unless you wanna spend 4k on bling. __________________ 2018 Camaro SS 1LE (455hp) - 2011 Nissan 370z (333hp) - 2004 VW R32 (240hp) - 2000 Civic Si (160hp)

12-12-2013, 11:54 AM	#3 (permalink)
cycy89 A True Z Fanatic Join Date: Jun 2011 Location: 120mph somewhere Posts: 1,097 Drives: #TTURBOZ Rep Power: 30	I have stillen drilled/slotted rotors, ss lines and motul brake fluid right now. I'm selling my setup and upgrade to bigger brakes. I do track my car and it's getting TT right now. __________________ Fast Intentions Twin Turbo Kit GT2860RS, 677WHP\|FI 34 row oil cooler\|F.I. CBE\|Fast 500E return fuel system\|FI trans cooler\|FI billet aluminum flex plate\|Excedy clutch packs\|ENKEI RP03\|BC BR coilovers\|SEIBON Carbon\|EVO-R Rear fog light\|GTR push start\|Whiteline sway bars, Diff bushing\|DSS axles\|ECUTekW/FlexFuelTune

12-12-2013, 11:59 AM	#4 (permalink)
cycy89 A True Z Fanatic Join Date: Jun 2011 Location: 120mph somewhere Posts: 1,097 Drives: #TTURBOZ Rep Power: 30	More going power needs more stopping power lol __________________ Fast Intentions Twin Turbo Kit GT2860RS, 677WHP\|FI 34 row oil cooler\|F.I. CBE\|Fast 500E return fuel system\|FI trans cooler\|FI billet aluminum flex plate\|Excedy clutch packs\|ENKEI RP03\|BC BR coilovers\|SEIBON Carbon\|EVO-R Rear fog light\|GTR push start\|Whiteline sway bars, Diff bushing\|DSS axles\|ECUTekW/FlexFuelTune

12-12-2013, 12:05 PM	#5 (permalink)
DEpointfive0 Premium Member Bitches Join Date: Jan 2012 Location: SoCal Posts: 14,824 Drives: a lot Rep Power: 17151	Sorry for the off topic, but are you getting a bigger radiator? Also, get cooling ducts and... Stick to a brand name, I believe Mike runs StopTech and Spohn runs Brembo, I might be wrong about Spohn. And know that the BBK rotors last 10-20 track days depending on usage, so have plenty of money for replacement discs. __________________ Do YOU want to know what/where I got my username from? ( Click to show/hide ) NSFW due to language:

12-12-2013, 04:20 PM	#6 (permalink)
ValidusVentus Enthusiast Member Join Date: Jun 2011 Location: Washington State Posts: 400 Drives: #18 Z34 Rep Power: 23	Check my sig. __________________ Mods: Dedicated caged track car, lots of things. \|\|\| Valkyrie Autosport \|\|\|

12-12-2013, 04:23 PM	#7 (permalink)
Juan@Fontana Enthusiast Member Join Date: Nov 2013 Location: Fontana Posts: 315 Drives: Z32 Rep Power: 22	i have R33 GTR brembos on my car, it was making about low 400hp before i took her apart for the new build. I run Endless MX-72 pads with Endless RF650 fluid and I have no complaints at all. I currently run them with DBA Rotors and have Zero complaints. I street and Track the car and those brakes seem to be a good combo. recently before i put her away for the winter i started using the MA20 pads from Endless in the track since i started going faster and liked them more at the track but where a bit loud on the street and kind of sketchy when cold. -Juan ValidusVentus and cycy89 like this.

12-12-2013, 06:17 PM	#10 (permalink)
cycy89 A True Z Fanatic Join Date: Jun 2011 Location: 120mph somewhere Posts: 1,097 Drives: #TTURBOZ Rep Power: 30	Very good info Thanks guys!! __________________ Fast Intentions Twin Turbo Kit GT2860RS, 677WHP\|FI 34 row oil cooler\|F.I. CBE\|Fast 500E return fuel system\|FI trans cooler\|FI billet aluminum flex plate\|Excedy clutch packs\|ENKEI RP03\|BC BR coilovers\|SEIBON Carbon\|EVO-R Rear fog light\|GTR push start\|Whiteline sway bars, Diff bushing\|DSS axles\|ECUTekW/FlexFuelTune

12-13-2013, 05:54 PM	#11 (permalink)
rlhotka Base Member Join Date: Apr 2013 Location: Prior Lake Posts: 68 Drives: 2012 370Z white manu Rep Power: 12	So does that mean there are a bunch of Akebono system's for sale for me?

12-13-2013, 07:01 PM	#12 (permalink)
cycy89 A True Z Fanatic Join Date: Jun 2011 Location: 120mph somewhere Posts: 1,097 Drives: #TTURBOZ Rep Power: 30	Mine's already sold.. __________________ Fast Intentions Twin Turbo Kit GT2860RS, 677WHP\|FI 34 row oil cooler\|F.I. CBE\|Fast 500E return fuel system\|FI trans cooler\|FI billet aluminum flex plate\|Excedy clutch packs\|ENKEI RP03\|BC BR coilovers\|SEIBON Carbon\|EVO-R Rear fog light\|GTR push start\|Whiteline sway bars, Diff bushing\|DSS axles\|ECUTekW/FlexFuelTune

12-13-2013, 11:15 PM	#13 (permalink)
DLo Base Member Join Date: Jul 2012 Location: SoCal - South Bay Posts: 244 Drives: 2012 370Z NISMO GM Rep Power: 13	Here is what I did: NISMO Circular Brake Ducts Using Revotec Inlets & Stillen Brake Cooling Kit cycy89 likes this. __________________ 2012 NISMO #294 Gunmetal Metallic - Stock

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
need some help with aftermarket speaker setup	reldas	Audio & Video	1	04-19-2012 12:47 PM
Big Brake kits and Coilovers	#452-LE	Brakes & Suspension	16	01-28-2011 04:22 PM
Non-Bose Aftermarket Setup NEED ADVICE	Carbon_z	Audio & Video	16	11-03-2010 01:49 AM
What sets one brake setup apart from another?	JoeyD	Brakes & Suspension	17	04-20-2009 01:39 PM