Got a problem (need a solution)

Wonka2581

Hey guys,

I have the Z1 Akebono brake upgrade kit on my base, I love the kit but I am having one problem with it. The rotors are oxidising below where the pads hit the rotor, Can you all give my a solution to this problem?

__________________
"I have nothing to offer but blood, toil, tears and sweat""Winston Churchill"

Wonka2581

ImageUploadedByTapatalk1371966838.912863.jpg
ImageUploadedByTapatalk1371966853.249215.jpg

__________________
"I have nothing to offer but blood, toil, tears and sweat""Winston Churchill"

sparky

That's a small ring but if it bothers you maybe mask off rotor and hit it with black high temp paint?

__________________
2012 370Z GM 7AT/JWM LEDs / 3M clear bra / 35% tint / GTR start button / FI CBE SS 18" RES / Momo shift knob / K & N Typhoon / Z1 hood struts / H&R 20mm f/r / illuminated kickplates

Wonka2581

My OCD about the car has hit the roof LMFAO, Ya its bothering me. Do you know if they make a Hi-temp clear? but if I use a clear do you think it will yellow?

__________________
"I have nothing to offer but blood, toil, tears and sweat""Winston Churchill"

sparky

Apparently they do but you may have to hunt it down online, don't know if the local store will have a huge selection. I know most around here will just have the usual red, blue, black etc.

Try this: http:// http://www.duplicolor.com/products/enginePaint/

Clear is at the bottom.

__________________
2012 370Z GM 7AT/JWM LEDs / 3M clear bra / 35% tint / GTR start button / FI CBE SS 18" RES / Momo shift knob / K & N Typhoon / Z1 hood struts / H&R 20mm f/r / illuminated kickplates

Wonka2581

Thanks, but if I go clear do you think it will yellow over time?

__________________
"I have nothing to offer but blood, toil, tears and sweat""Winston Churchill"

sparky

Not sure, maybe email or call duplicolor and ask them. If so your next best option is silver or black. From five feet away you'll be the only one that knows. Not a good answer for a case of OCD I know.

__________________
2012 370Z GM 7AT/JWM LEDs / 3M clear bra / 35% tint / GTR start button / FI CBE SS 18" RES / Momo shift knob / K & N Typhoon / Z1 hood struts / H&R 20mm f/r / illuminated kickplates

SATX_NISMO

Just use a high temp gloss or semi gloss black paint. You really dont need to clear coat them. Looks like you keep your Z pretty clean and avoid brake dust build up. Thats what I did on my rotors. I just cleaned off the rust with some fine steel wool and cleaned up with some brake cleaner.

Alstann

I doubt any clearcoat could withstand that rotor temp that well, tbh. Especially since that ring is directly on the braking surface.

__________________

Rusty

Think the first time your brakes get HOT. Any paint that's in that area will get cooked off. My 2 cents.

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html

JARblue

I just recently installed ECB USR rotors. They come painted black, but the pad rubs the black off most of the rotor during the bedding process. I purchased some Rustoleum 2000F High Temp spray paint for the slots based on the recommendation of another forum member who purchased the 1000F temp stuff, but I didn't have time to paint the slots before the install.

__________________

Wonka2581

I'm thinking of getting the high temp paint. Cleaning off the rust and painting the area we will see how it goes, thanks for all your input guys!

__________________
"I have nothing to offer but blood, toil, tears and sweat""Winston Churchill"