Pics of drilled hole for KW V3 Rebound??? Anyone have any?

MIKE_STR · 06-20-2013, 07:19 PM

Does anyone have a pic of the hole they drilled in the back plastics to adjust the rebound on their KW V3's?

I don't want to start drilling in the wrong spot... Also, I'm too lazy at this point to take apart all of my plastics just to get a good look at it.

Any pictures would be greatly appreciated.

-Mike

DR_ · 06-20-2013, 08:56 PM

Here is my setup but it isn't KW.

ColdFire · 06-26-2013, 05:04 PM

Quote:

Originally Posted by DR_

Here is my setup but it isn't KW.

where can I buy the knob I plan to do the same setup for my KW V3 meaning a permit one on each strut head.

XwChriswX · 06-27-2013, 11:51 PM

I'm very interested and need to do this myself...

But I don't think the KWv3's have extended knobs like these??

Correct me if I'm wrong please..

djtodd · 06-28-2013, 12:02 AM

I know stance makes extensions for their setup. Guessing others do as well. If not, it wouldnt surprise me if theirs could be used on other setups.

Boost_lee · 06-28-2013, 12:03 AM

I'm not sure about the KW, but here are my BC's

I trimmed mine down so the knob is a little more flush to the plastic

Alstann · 06-28-2013, 02:17 PM

The KW uses a small allen wrench to adjust the topside, I forgot which size.

I'm sure you can go buy a cheapo allen wrench, glue it to a knob, and stick it in the adjuster. Possibly use some glue to hold it to the adjuster as well. Unless anyone knows a more professional method. ^^

XwChriswX · 07-10-2013, 12:42 AM

For those that did this with any coil set, how do you measure out the right spot to drill through? A hole say 1" to put an allen wrench through to adjust so I don't have to remove my interior trim each time I need to adjust it...

06-20-2013, 07:19 PM	#1 (permalink)
MIKE_STR Base Member Join Date: Jun 2013 Location: Draper, UT Posts: 89 Drives: 2009 370z Rep Power: 12	Pics of drilled hole for KW V3 Rebound??? Anyone have any? Does anyone have a pic of the hole they drilled in the back plastics to adjust the rebound on their KW V3's? I don't want to start drilling in the wrong spot... Also, I'm too lazy at this point to take apart all of my plastics just to get a good look at it. Any pictures would be greatly appreciated. -Mike

06-20-2013, 08:56 PM	#2 (permalink)
DR_ Track Member Join Date: Jul 2009 Location: Dallas Posts: 981 Drives: Touring/Sport M6 PG Rep Power: 17	Here is my setup but it isn't KW. fuct, dP3NGU1N, GaleForce and 2 others like this.

06-27-2013, 11:51 PM	#4 (permalink)
XwChriswX WFLYIDNNE Join Date: Jul 2009 Location: In The Fastlane Posts: 50,648 Drives: 02 GDB WRX Rep Power: 452	I'm very interested and need to do this myself... But I don't think the KWv3's have extended knobs like these?? Correct me if I'm wrong please.. __________________ Bonnie - Stage 2, Audio build coming this fall! R.I.P. Abby 3/29/10 - 3/30/14

06-28-2013, 12:03 AM	#6 (permalink)
Boost_lee A True Z Fanatic Join Date: Feb 2009 Location: SATX Posts: 2,813 Drives: 09 370Z TT 6MT Rep Power: 30	I'm not sure about the KW, but here are my BC's I trimmed mine down so the knob is a little more flush to the plastic __________________ My TT Z

06-28-2013, 02:17 PM	#7 (permalink)
Alstann Track Member Join Date: Oct 2011 Location: South Florida Posts: 882 Drives: 12 PW 370z 6MT Sport Rep Power: 15	The KW uses a small allen wrench to adjust the topside, I forgot which size. I'm sure you can go buy a cheapo allen wrench, glue it to a knob, and stick it in the adjuster. Possibly use some glue to hold it to the adjuster as well. Unless anyone knows a more professional method. ^^ __________________ 2012 Pearl White 370Z GReddy Twin Turbo

06-28-2013, 12:02 AM	#5 (permalink)
djtodd Track Member Join Date: Jun 2012 Location: Lexington, SC Posts: 932 Drives: 2012 Nismo TT Rep Power: 3398	I know stance makes extensions for their setup. Guessing others do as well. If not, it wouldnt surprise me if theirs could be used on other setups.

07-10-2013, 12:42 AM	#8 (permalink)
XwChriswX WFLYIDNNE Join Date: Jul 2009 Location: In The Fastlane Posts: 50,648 Drives: 02 GDB WRX Rep Power: 452	For those that did this with any coil set, how do you measure out the right spot to drill through? A hole say 1" to put an allen wrench through to adjust so I don't have to remove my interior trim each time I need to adjust it... __________________ Bonnie - Stage 2, Audio build coming this fall! R.I.P. Abby 3/29/10 - 3/30/14

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Drilled Holes in Front Bumper ('13 Nismo Z)	VAUROS	Exterior & Interior	26	05-02-2013 01:12 PM
FS stoptech drilled slotted rotors brand new	zzdudaka	Parts for sale (Private Classifieds)	9	03-13-2011 11:17 AM
StopTech Blog: Slotted vs. Drilled Rotors	Robert_K	Brakes & Suspension	9	08-21-2010 02:13 AM
Cross-Drilled/Slotted Rotors for Non-Sport?	bowenmedia	Brakes & Suspension	5	12-14-2009 01:14 PM
Advantages to slotted or drilled rotors? I don't think so.	Acepro	Brakes & Suspension	27	11-19-2009 01:35 PM