Motive bleeder which O ring?

Bryzed

My Motive just arrived today and has come with 2 O rings . Anyone know which one works best with the 370z , the thicker or thinner one?
Thanks

k67p67

If I recall correctly, my Motive bleeder only came with one o-ring. Which adapter are you using?

__________________
2017 370Z Nismo Tech 6MT PART OUT IN PROGRESS
Work | Motordyne | Powertrix | Swift | Michelin | Takeda | Hotchkis | RJM | Voodoo13 | SPL | SPC | Z1 Motorsports | ZSpeed | Morimoto | Craft Square

Averying

I had to use the thinner one to get it to seal if I remember correctly. I have the plastic adapter cap version


Sent from my iPhone using Tapatalk

__________________
2009 Sport Touring | Platinum Graphite | GTM Stage 1 Supercharger | BC BR Coilovers | Hotchkis Swaybar | Z1 FUCAs | AME TM-02 Wheels | Z1 2-piece Front Rotors | Z1 Clutch & Flywheel | Invidia Gemini Catback | GTM Resonated Test Pipes

Bryzed

The plastic one for Ford and Asian vehicles, think it's 1117 or 1107.

k67p67

The 1117 adapter is correct. It typically has a red anodized cap but I think some variations are black plastic.

__________________
2017 370Z Nismo Tech 6MT PART OUT IN PROGRESS
Work | Motordyne | Powertrix | Swift | Michelin | Takeda | Hotchkis | RJM | Voodoo13 | SPL | SPC | Z1 Motorsports | ZSpeed | Morimoto | Craft Square

Bryzed

It would appear that I have a faulty item, as it won't hold pressure as I can hear the air leaking from inside the pressure guage

Averying

I also had a faulty pressure gauge when I received my bleeder. They sent me a new one


Sent from my iPhone using Tapatalk

__________________
2009 Sport Touring | Platinum Graphite | GTM Stage 1 Supercharger | BC BR Coilovers | Hotchkis Swaybar | Z1 FUCAs | AME TM-02 Wheels | Z1 2-piece Front Rotors | Z1 Clutch & Flywheel | Invidia Gemini Catback | GTM Resonated Test Pipes

Bryzed

Must be a faulty batch, I'm in Australia and the bleeder came from Las Vegas so let's see how good Amazon is with sorting it all out !

Averying

I directly called motive even though I think mine was also purchased thru Amazon. They were quick to ship out another gauge


Sent from my iPhone using Tapatalk

__________________
2009 Sport Touring | Platinum Graphite | GTM Stage 1 Supercharger | BC BR Coilovers | Hotchkis Swaybar | Z1 FUCAs | AME TM-02 Wheels | Z1 2-piece Front Rotors | Z1 Clutch & Flywheel | Invidia Gemini Catback | GTM Resonated Test Pipes

Bryzed

Turns out it was the fitting that the gauge screws into was leaking. Motive should really have used an O ring to seal the fitting to the plastic bottle, I just putsilicone thread sealer on the fitting and now it holds pressure.

ZoomZ

Wasn't it at least put in with Teflon tape from Factory?

__________________
“Action without vision is a nightmare.”

Bryzed

No, just some kind of glue. The hole that it goes through was pretty rough too so I cleaned it up and used PTFE tape and silicone thread sealer to seal it. Pretty poor quality control by motive

ZoomZ

You said it came from Amazon not Motive direct?

Often these Amazon "sellers" buy big bin bargains from Amazon and sell on their storefront.

Often these items have sat for a long time in uncontrolled conditions or were previously returned and slight damage.

I'm sure someone with untrained eye saw this and deemed it ok to resell.

I've learned my lessons. I always buy from "Ship and sold by AMAZON". (not a resellers) However, I always default the manufacturer and order direct. Prices are often same but shipping may be costlier.

__________________
“Action without vision is a nightmare.”

Bryzed

That's good info
Thanks