Help! Slip light and ABS engages on turns

SmRndmUser · 02-01-2021, 08:47 PM

Hello, I installed GKTECH’s super angle kit and have had two alignments. As the title states, the slip light and ABS kicks in when making turns. When disabling VDC, this happens but only when applying pressure to the brakes. I’ve had someone use a snap on scan tool to reset the steering angle sensor, and it hasn’t changed. Anything I can do to fix this before I head to the stealership? I’m guessing it needs more than just resetting the sensor, it needs to either recalibrate or program the new angle parameters, but I could be way off.

Thanks

Rusty · 02-01-2021, 10:22 PM

One of the things that set off the lights is low brake fluid. Check to make sure your brake fluid level is at the max line.

SouthArk370Z · 02-01-2021, 10:25 PM

Double-check tire sizes (diameter/circumference). Front and rear sets need to match. Difference between front and rear has to be within a certain range (can't remember what it is but someone will probably post what it is).

Edit: And as per Rusty, check brake reservoir level - it needs to be full.

JARblue · 02-01-2021, 10:49 PM

Common issue. Add brake fluid

Rusty · 02-01-2021, 11:36 PM

Quote:

Originally Posted by SouthArk370Z

Double-check tire sizes (diameter/circumference). Front and rear sets need to match. Difference between front and rear has to be within a certain range (can't remember what it is but someone will probably post what it is).

Edit: And as per Rusty, check brake reservoir level - it needs to be full.

Within 3% front to rear diameter.

SmRndmUser · 02-01-2021, 11:52 PM

Quote:

Originally Posted by SouthArk370Z

Double-check tire sizes (diameter/circumference). Front and rear sets need to match. Difference between front and rear has to be within a certain range (can't remember what it is but someone will probably post what it is).

Edit: And as per Rusty, check brake reservoir level - it needs to be full.

I run 255/40 R19 up front and 285/35 R19 in the back. This started happening right after the angle kit install so I haven’t checked brake fluid nor have I blamed the tires. I will take a look at my fluid level in the morning. Any other suggestions would be appreciated. Thank you all

Rusty · 02-02-2021, 12:37 AM

Quote:

Originally Posted by SmRndmUser

I run 255/40 R19 up front and 285/35 R19 in the back. This started happening right after the angle kit install so I haven’t checked brake fluid nor have I blamed the tires. I will take a look at my fluid level in the morning. Any other suggestions would be appreciated. Thank you all

Your tires are good at 0.5% difference.

02-01-2021, 08:47 PM	#1 (permalink)
SmRndmUser Base Member Join Date: Jun 2020 Location: Houston, TX Posts: 12 Drives: 15 370Z Rep Power: 5	Help! Slip light and ABS engages on turns Hello, I installed GKTECH’s super angle kit and have had two alignments. As the title states, the slip light and ABS kicks in when making turns. When disabling VDC, this happens but only when applying pressure to the brakes. I’ve had someone use a snap on scan tool to reset the steering angle sensor, and it hasn’t changed. Anything I can do to fix this before I head to the stealership? I’m guessing it needs more than just resetting the sensor, it needs to either recalibrate or program the new angle parameters, but I could be way off. Thanks

02-01-2021, 10:22 PM	#2 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,180 Drives: 2011 Nismo GM 6M Rep Power: 2684437	One of the things that set off the lights is low brake fluid. Check to make sure your brake fluid level is at the max line. JARblue likes this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

02-01-2021, 10:25 PM	#3 (permalink)
SouthArk370Z Premium Member Join Date: Nov 2010 Location: South Arkansas Posts: 8,435 Drives: 2014 Challenger Rep Power: 324198	Double-check tire sizes (diameter/circumference). Front and rear sets need to match. Difference between front and rear has to be within a certain range (can't remember what it is but someone will probably post what it is). Edit: And as per Rusty, check brake reservoir level - it needs to be full. JARblue and Rusty like this. __________________ Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

02-01-2021, 10:49 PM	#4 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	Common issue. Add brake fluid __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
new rear tires slip then grab slip then grab on hard turns	tycomps	Wheels & Tires	16	11-21-2019 10:07 AM
Abs and slip light	Dragon_Ball_Z	Brakes & Suspension	12	07-15-2017 09:53 PM
09 370z brake light turns on	Naum16	Brakes & Suspension	4	03-26-2013 10:17 PM
VDC off light / VDC slip light constant on with parking brake light acting slip light	ZeN	Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs	0	08-27-2012 11:04 AM
Break light turns on randomly	Vbp6US	Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs	2	05-25-2012 02:23 AM