Front camber arm needed?

Joon · 12-22-2020, 12:01 PM

Hello,

It looks like my passenger front side is a little off, would’ve been good if it was around 1.5 but it’s at 2.09. Is front camber arm needed for daily driving? No tracking.

Chuck33079 · 12-22-2020, 01:07 PM

If you lower the car, you need camber arms and toe bolts.

Joon · 12-22-2020, 01:22 PM

I got them all for the rear but some say that the front was fine without it since it’s just a little in the red.

Chuck33079 · 12-22-2020, 01:49 PM

Please see the post above yours.

JARblue · 12-22-2020, 02:57 PM

You don't have to buy them if you don't want to. In fact, I don't know why people even bother getting an alignment. Uneven tire wear FTMFW!!

AlWakRa · 12-22-2020, 06:15 PM

The wear will not so bad on front as you have toe within spec.

Rusty · 12-22-2020, 08:03 PM

Quote:

Originally Posted by Joon

Hello,

It looks like my passenger front side is a little off, would’ve been good if it was around 1.5 but it’s at 2.09. Is front camber arm needed for daily driving? No tracking.

If you are OCD. Get a set of SPL arms. If not, you good for DD. But if you are planning to go lower. Get the arms.

abm89 · 12-22-2020, 10:25 PM

I have -2.7 degrees of camber all around, but my toe is in (or close to) spec. The wear on my tires is not bad.

As long as your toe is setup correctly, you should be fine. Of course, I have arms to get that much camber in the front without being on the ground.

justin_boy · 12-24-2020, 01:32 PM

honestly...if you're not tracking, imo skip the spl. I have spl front and back and if it was for daily driving I would go with Z1's fuca. SPL is solid dont get me wrong, but 900 for fuca is pricey. From what ive heard z1 is solid as well

JARblue · 12-24-2020, 01:57 PM

Quote:

Originally Posted by justin_boy

if it was for daily driving I would go with Z1's fuca.

If you need the arms for adjustability why on earth would you want to buy one that can't be adjusted while installed on the car? SPL is the only way to go.

Rusty · 12-24-2020, 04:00 PM

Quote:

Originally Posted by JARblue

If you need the arms for adjustability why on earth would you want to buy one that can't be adjusted while installed on the car? SPL is the only way to go.

Yep. The SPL and VooDoo arms are the ONLY 2 that you don't have to remove from the car to make adjustments.

justin_boy · 12-24-2020, 08:40 PM

Quote:

Originally Posted by JARblue

If you need the arms for adjustability why on earth would you want to buy one that can't be adjusted while installed on the car? SPL is the only way to go.

that is a fantastic point. I did not realize those were the only 2 that could be adjusted without removing

abm89 · 12-25-2020, 01:42 PM

I have the Z1 fronts, but I don't do my own alignments. The first alignment is going to be a bitch but if you don't change your setup for every track it's perfectly fine. Honestly, SPL is good if you're on the road setting your car up for different tracks.

Also the place I go to has a packaged price for 4 wheel alignments and corner-balancing. Just don't buy SPC.

12-22-2020, 01:07 PM	#2 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29539	If you lower the car, you need camber arms and toe bolts. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

12-22-2020, 01:49 PM	#4 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29539	Please see the post above yours. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

12-22-2020, 02:57 PM	#5 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	You don't have to buy them if you don't want to. In fact, I don't know why people even bother getting an alignment. Uneven tire wear FTMFW!! OMGWTFBBQ, cooltoy and -ZS-Carpenter like this. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

12-22-2020, 06:15 PM	#6 (permalink)
AlWakRa Track Member Join Date: Oct 2010 Location: Qatar Posts: 600 Drives: 10 370Z PW 6MT Rep Power: 13450	The wear will not so bad on front as you have toe within spec. __________________ 2010 370Z Touring Sport Pearl White 6MT Powered by: Fast Intentions - Motordyne - Stillen - OS Giken - CJ Motorsports - Mishimoto - MCA Suspension - SPL - SuperPRO - RJM - Z1 Motorsport - Zspeed - Volk My Humble Journals

12-22-2020, 10:25 PM	#8 (permalink)
abm89 A True Z Fanatic Join Date: Feb 2013 Location: Austin, Texas Posts: 1,386 Drives: 11 370Z \| 24 EL450 Rep Power: 64763	I have -2.7 degrees of camber all around, but my toe is in (or close to) spec. The wear on my tires is not bad. As long as your toe is setup correctly, you should be fine. Of course, I have arms to get that much camber in the front without being on the ground. __________________ Complete Parts List: https://github.com/abm89/ztouge-build

12-22-2020, 01:22 PM	#3 (permalink)
Joon Base Member Join Date: Aug 2020 Location: MN Posts: 20 Drives: 2013 370Z Rep Power: 5	I got them all for the rear but some say that the front was fine without it since it’s just a little in the red.

12-24-2020, 01:32 PM	#9 (permalink)
justin_boy Track Member Join Date: May 2015 Location: woodland hills Posts: 600 Drives: z34 Rep Power: 8367	honestly...if you're not tracking, imo skip the spl. I have spl front and back and if it was for daily driving I would go with Z1's fuca. SPL is solid dont get me wrong, but 900 for fuca is pricey. From what ive heard z1 is solid as well

12-25-2020, 01:42 PM	#13 (permalink)
abm89 A True Z Fanatic Join Date: Feb 2013 Location: Austin, Texas Posts: 1,386 Drives: 11 370Z \| 24 EL450 Rep Power: 64763	I have the Z1 fronts, but I don't do my own alignments. The first alignment is going to be a bitch but if you don't change your setup for every track it's perfectly fine. Honestly, SPL is good if you're on the road setting your car up for different tracks. Also the place I go to has a packaged price for 4 wheel alignments and corner-balancing. Just don't buy SPC. __________________ Complete Parts List: https://github.com/abm89/ztouge-build

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Clarification needed on camber kit requirement	Ralphatron	Brakes & Suspension	15	12-18-2020 04:04 PM
Problem with front SPC camber kit...help needed	docaam	Brakes & Suspension	8	06-15-2016 02:05 PM
Camber Kit Needed on Lowered Z?	BlackZMamba	Nissan 370Z General Discussions	3	05-10-2016 09:43 AM
Eibach prokit - Camber kit needed?	dislimn	Brakes & Suspension	1	08-11-2014 02:39 AM
Advice Needed - Camber out of Spec	elliotty	Brakes & Suspension	16	11-19-2012 08:23 PM