Spl camber arms and tow bolt question.

svt to 370z · 03-02-2019, 11:35 PM

I plan on buying swift springs next month. I've been doing some research and most recommend the spl camber arms and toe bolts. Why are these recommended on the back and not the front ? I don't track and this is my casual weekend car( 2018 put 1000 miles on it. 2009 with 16k). I see the springs are about 314 the camber arms and bolts about 330. Would those be essential for my needs? Mainly looking for the drop. I'm also running 265 front 305 rear and have 20mm h&r spacers all round waiting to be installed too. Any info will help me understand this. Thanks guys

Rusty · 03-03-2019, 03:49 AM

SPL stuff doesn't break.

jchammond · 03-03-2019, 03:54 AM

Quote:

Originally Posted by svt to 370z

I plan on buying swift springs next month. I've been doing some research and most recommend the spl camber arms and toe bolts. Why are these recommended on the back and not the front ? I don't track and this is my casual weekend car( 2018 put 1000 miles on it. 2009 with 16k). I see the springs are about 314 the camber arms and bolts about 330. Would those be essential for my needs? Mainly looking for the drop. I'm also running 265 front 305 rear and have 20mm h&r spacers all round waiting to be installed too. Any info will help me understand this. Thanks guys

The stuff for the rear will allow you to put the camber & toe back to spec...as the front camber must not go sever enough negative for the “Fuca’s”.....but that would be the proper way up front

svt to 370z · 03-04-2019, 05:33 PM

so its necessary so the tires don't wear unevenly in the inner tread

Rusty · 03-04-2019, 05:57 PM

Quote:

Originally Posted by svt to 370z

so its necessary so the tires don't wear unevenly in the inner tread

Too much neg camber will cause the tires to wear on the inside.

Jetsimple · 03-08-2019, 11:33 AM

The toe bolts are pretty much a necessity. When I put on my KWV3 coilovers and went for a test drive, I couldn’t get over 25 mph without the car going all over the place. I set the toe out on the rear as far out as stock toe bolts would allow and it was better, but still not enough.

Jetsimple · 03-08-2019, 11:37 AM

There’s this exact setup for sale in the classified section right now, except they have SPC camber arms instead of SPL.

k67p67 · 03-08-2019, 09:35 PM

Quote:

Originally Posted by Jetsimple

There’s this exact setup for sale in the classified section right now, except they have SPC camber arms instead of SPL.

That's hardly "this exact setup"! SPC doesn't compare to SPL.

Jetsimple · 03-08-2019, 10:38 PM

Quote:

Originally Posted by k67p67

That's hardly "this exact setup"! SPC doesn't compare to SPL.

Agreed, but since the OP doesn’t track the Z and is only interested in the drop, I figured it would work for him.

k67p67 · 03-08-2019, 10:44 PM

Agreed

svt to 370z · 03-09-2019, 08:42 AM

Thanks for the input guys. Damn he's selling the exact set up I am getting. I already bought the spc camber arms and toe bolts last week. Found them for 198 shipped. I appreciate the info guys this really helped me out!
Ordering swifts next week and 20 mm spacers all around. Cant wait to get the car outta storage in a month or so and get to work!

03-02-2019, 11:35 PM	#1 (permalink)
svt to 370z Base Member Join Date: May 2011 Location: berea,oh Posts: 139 Drives: 09 red 370z 6mt Rep Power: 14	Spl camber arms and tow bolt question. I plan on buying swift springs next month. I've been doing some research and most recommend the spl camber arms and toe bolts. Why are these recommended on the back and not the front ? I don't track and this is my casual weekend car( 2018 put 1000 miles on it. 2009 with 16k). I see the springs are about 314 the camber arms and bolts about 330. Would those be essential for my needs? Mainly looking for the drop. I'm also running 265 front 305 rear and have 20mm h&r spacers all round waiting to be installed too. Any info will help me understand this. Thanks guys jchammond likes this.

03-03-2019, 03:49 AM	#2 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,219 Drives: 2011 Nismo GM 6M Rep Power: 2684438	SPL stuff doesn't break. Corsairprime and jchammond like this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

03-08-2019, 10:44 PM	#10 (permalink)
k67p67 Enthusiast Member Join Date: Oct 2016 Location: Rancho Cucamonga, CA Posts: 304 Drives: 2017 Nismo Tech 6MT Rep Power: 3937	Agreed __________________ 2017 370Z Nismo Tech 6MT PART OUT IN PROGRESS Work \| Motordyne \| Powertrix \| Swift \| Michelin \| Takeda \| Hotchkis \| RJM \| Voodoo13 \| SPL \| SPC \| Z1 Motorsports \| ZSpeed \| Morimoto \| Craft Square

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Kinetix front camber arms, voodo13 toe arms and spc toe bolts	redline10000	Parts for sale (Private Classifieds)	5	11-26-2017 09:12 AM
[FOR SALE] SoCal: SPL Rear Camber Arms, SPC Front Upper Control Arms, and 20mm/25mm Spacers	NoHyperbole	Parts for sale (Private Classifieds)	7	01-27-2017 10:41 AM
Front spl camber arms question	Z Runner	Brakes & Suspension	6	05-29-2016 02:14 PM
[FOR SALE] AMS front/rear camber arms + Traction arms - NEW	daisuke149	Parts for sale (Private Classifieds)	10	04-29-2014 01:24 PM
SPC rear camber arms needs drilling? end links for hotckis question as well.	kevin.z	Brakes & Suspension	4	06-25-2010 11:30 PM

03-04-2019, 05:33 PM	#4 (permalink)
svt to 370z Base Member Join Date: May 2011 Location: berea,oh Posts: 139 Drives: 09 red 370z 6mt Rep Power: 14	so its necessary so the tires don't wear unevenly in the inner tread

03-08-2019, 11:33 AM	#6 (permalink)
Jetsimple Base Member Join Date: Nov 2018 Location: NE Tennessee Posts: 51 Drives: 2010 370 Z Rep Power: 225	The toe bolts are pretty much a necessity. When I put on my KWV3 coilovers and went for a test drive, I couldn’t get over 25 mph without the car going all over the place. I set the toe out on the rear as far out as stock toe bolts would allow and it was better, but still not enough.

03-08-2019, 11:37 AM	#7 (permalink)
Jetsimple Base Member Join Date: Nov 2018 Location: NE Tennessee Posts: 51 Drives: 2010 370 Z Rep Power: 225	There’s this exact setup for sale in the classified section right now, except they have SPC camber arms instead of SPL.

03-09-2019, 08:42 AM	#11 (permalink)
svt to 370z Base Member Join Date: May 2011 Location: berea,oh Posts: 139 Drives: 09 red 370z 6mt Rep Power: 14	Thanks for the input guys. Damn he's selling the exact set up I am getting. I already bought the spc camber arms and toe bolts last week. Found them for 198 shipped. I appreciate the info guys this really helped me out! Ordering swifts next week and 20 mm spacers all around. Cant wait to get the car outta storage in a month or so and get to work!