SPC rear camber arms - two different designs?

CRiZO · 12-15-2018, 02:11 PM

Hey all, I've been accumulating some suspension parts and with it, SPC rear camber arms. Just springs so it won't be super low, and no serious tracking.

I bought them from Kamispeed and they look just like this:
https://www.kamispeed.com/SPC-Rear-C.../spc.72260.htm

But on Z1, they're bent like some others I've seen to avoid the sway bar:
https://www.z1motorsports.com/suspen...37-p-3980.html

Have they been updated, or just a mistake on the Z1 website? On the SPC website, that part number shows a straight arm.

Thanky

@KamiSpeed @Z1motorsports (not sure if you can tag peeps on here)

Brendan · 12-17-2018, 09:55 AM

The photo of the z1 arm may be for a different vehicle/generic photo. The oem and nearly every aftermarket adjustable arm is straight and does not need to bend to get around the sway bar. You should be fine purchasing from your vendor of choice. Just check their return policy if you are really concerned about it.

cv129 · 12-17-2018, 11:06 AM

The design was updated at some point after the SPC’s bent version snapped on track.

Doran Racing NISMO RC suspension parts

Rusty · 12-22-2018, 03:55 PM

Quote:

Originally Posted by cv129

The design was updated at some point after the SPC’s bent version snapped on track.

Doran Racing NISMO RC suspension parts

That's why us track rats run SPL.

YYZ · 12-22-2018, 07:48 PM

I have the SPC straight arms with a hotchkis sway bars f/r and stock endlinks. Lowered with Eibach. The clearance is just a few mm but it has never touched. It's really close though. My Z has been on track a few times but it's really just a DD. No problems for me after 20,000 miles.

12-15-2018, 02:11 PM	#1 (permalink)
CRiZO Track Member Join Date: Nov 2017 Location: Dallas Posts: 672 Drives: in traffic Rep Power: 20699	SPC rear camber arms - two different designs? Hey all, I've been accumulating some suspension parts and with it, SPC rear camber arms. Just springs so it won't be super low, and no serious tracking. I bought them from Kamispeed and they look just like this: https://www.kamispeed.com/SPC-Rear-C.../spc.72260.htm But on Z1, they're bent like some others I've seen to avoid the sway bar: https://www.z1motorsports.com/suspen...37-p-3980.html Have they been updated, or just a mistake on the Z1 website? On the SPC website, that part number shows a straight arm. Thanky @KamiSpeed @Z1motorsports (not sure if you can tag peeps on here)

12-17-2018, 11:06 AM	#3 (permalink)
cv129 A True Z Fanatic Join Date: Jul 2011 Location: Dallas, TX Posts: 3,236 Drives: 09 Nismo, 16 Nismo Rep Power: 163995	The design was updated at some point after the SPC’s bent version snapped on track. Doran Racing NISMO RC suspension parts Rusty and CRiZO like this. __________________ Setrab \| RE-71 \| SPL \| JRZ \| Nismo \| ARK \| Whiteline \| RacingBrake \| CJM Oil Pan \| Ti shield Last edited by cv129; 12-17-2018 at 11:15 AM.

12-22-2018, 07:48 PM	#5 (permalink)
YYZ Base Member Join Date: Aug 2016 Location: Raleigh Posts: 71 Drives: 370z sport 6m 2015 Rep Power: 9	I have the SPC straight arms with a hotchkis sway bars f/r and stock endlinks. Lowered with Eibach. The clearance is just a few mm but it has never touched. It's really close though. My Z has been on track a few times but it's really just a DD. No problems for me after 20,000 miles. __________________ BORLA-SPC-EIBACH-HOTCHKIS

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Eibach Rear Sway / SPC Camber Arms / Rear SPL end links - Central NJ	PharmDZ	Parts for sale (Private Classifieds)	7	04-16-2017 09:39 PM
[FOR SALE] SoCal: SPL Rear Camber Arms, SPC Front Upper Control Arms, and 20mm/25mm Spacers	NoHyperbole	Parts for sale (Private Classifieds)	7	01-27-2017 10:41 AM
[FOR SALE] Spl rear camber arms, with toe bolts and ams rear traction bars	TOPHER9425	Parts for sale (Private Classifieds)	1	08-19-2014 07:59 AM
[FOR SALE] AMS front/rear camber arms + Traction arms - NEW	daisuke149	Parts for sale (Private Classifieds)	10	04-29-2014 01:24 PM
[FOR SALE] SPC rear CAMBER arms with Kinetix rear TRACTION / TOE arms	TVPostSound	Parts for sale (Private Classifieds)	2	03-19-2013 10:54 PM

12-17-2018, 09:55 AM	#2 (permalink)
Brendan Track Member Join Date: Apr 2013 Location: Colorado Posts: 642 Drives: Poor man's Porsche Rep Power: 542	The photo of the z1 arm may be for a different vehicle/generic photo. The oem and nearly every aftermarket adjustable arm is straight and does not need to bend to get around the sway bar. You should be fine purchasing from your vendor of choice. Just check their return policy if you are really concerned about it.